Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "The latest and greatest fixes for ARM platform code.  Worth pointing
  out are:

   - Lines-wise, largest is a PXA fix for dealing with interrupts on DT
     that was quite broken.  It's still newish code so while we could
     have held this off, it seemed appropriate to include now

   - Some GPIO fixes for OMAP platforms added a few lines.  This was
     also fixes for code recently added (this release).

   - Small OMAP timer fix to behave better with partially upstreamed
     platforms, which is quite welcome.

   - Allwinner fixes about operating point control, reducing
     overclocking in some cases for better stability.

  plus a handful of other smaller fixes across the map"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: juno: Fix misleading name of UART reference clock
  ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
  ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
  ARM: socfpga: dts: fix spi1 interrupt
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto
  ARM: dts: rockchip: disable gmac by default in rk3288.dtsi
  MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
  ARM: pxa: fix pxa interrupts handling in DT
  ARM: pxa: Fix typo in zeus.c
  ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage

MAINTAINERS

@@ -1362,6 +1362,7 @@ F:	drivers/i2c/busses/i2c-rk3x.c
 F:	drivers/*/*rockchip*
 F:	drivers/*/*/*rockchip*
 F:	sound/soc/rockchip/
+N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>

arch/arm/Kconfig

@@ -619,6 +619,7 @@ config ARCH_PXA
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE
+	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
 	select PLAT_PXA
 	select SPARSE_IRQ

arch/arm/boot/dts/dm8168-evm.dts

@@ -36,6 +36,20 @@
 		>;
 	};
 
+	mmc_pins: pinmux_mmc_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
+			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
+			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
+			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
+			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
+			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
+			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
+		>;
+	};
+
 	usb0_pins: pinmux_usb0_pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
@@ -137,7 +151,12 @@
 };
 
 &mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */

arch/arm/boot/dts/dm816x.dtsi

@@ -150,17 +150,27 @@
 		};
 
 		gpio1: gpio@48032000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			reg = <0x48032000 0x1000>;
-			interrupts = <97>;
+			interrupts = <96>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@4804c000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
 			reg = <0x4804c000 0x1000>;
-			interrupts = <99>;
+			interrupts = <98>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpmc: gpmc@50000000 {

arch/arm/boot/dts/dra7.dtsi

@@ -1111,7 +1111,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie1-phy";
 			};
 
 			pcie2_phy: pciephy@4a095000 {
@@ -1130,7 +1129,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie2-phy";
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/omap3.dtsi

@@ -92,6 +92,8 @@
 			ti,hwmods = "aes";
 			reg = <0x480c5000 0x50>;
 			interrupts = <0>;
+			dmas = <&sdma 65 &sdma 66>;
+			dma-names = "tx", "rx";
 		};
 
 		prm: prm@48306000 {
@@ -550,6 +552,8 @@
 			ti,hwmods = "sham";
 			reg = <0x480c3000 0x64>;
 			interrupts = <49>;
+			dmas = <&sdma 69>;
+			dma-names = "rx";
 		};
 
 		smartreflex_core: smartreflex@480cb000 {

arch/arm/boot/dts/rk3288.dtsi

@@ -411,6 +411,7 @@
 			"mac_clk_rx", "mac_clk_tx",
 			"clk_mac_ref", "clk_mac_refout",
 			"aclk_mac", "pclk_mac";
+		status = "disabled";
 	};
 
 	usb_host0_ehci: usb@ff500000 {

arch/arm/boot/dts/socfpga.dtsi

@@ -660,7 +660,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfff01000 0x1000>;
-			interrupts = <0 156 4>;
+			interrupts = <0 155 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
 			status = "disabled";

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -56,6 +56,22 @@
 	model = "Olimex A10-OLinuXino-LIME";
 	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
+	cpus {
+		cpu0: cpu@0 {
+			/*
+			 * The A10-Lime is known to be unstable
+			 * when running at 1008 MHz
+			 */
+			operating-points = <
+				/* kHz    uV */
+				912000  1350000
+				864000  1300000
+				624000  1250000
+				>;
+			cooling-max-level = <2>;
+		};
+	};
+
 	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -75,15 +75,14 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1056000 1500000
 				1008000 1400000
 				912000  1350000
 				864000  1300000
 				624000  1250000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <4>;
+			cooling-max-level = <3>;
 		};
 	};
 

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -47,7 +47,6 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1104000	1500000
 				1008000 1400000
 				912000  1350000
 				864000  1300000
@@ -57,7 +56,7 @@
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <6>;
+			cooling-max-level = <5>;
 		};
 	};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -105,7 +105,6 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1008000 1450000
 				960000  1400000
 				912000  1400000
 				864000  1300000
@@ -116,7 +115,7 @@
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <7>;
+			cooling-max-level = <6>;
 		};
 
 		cpu@1 {

arch/arm/mach-omap2/id.c

@@ -720,6 +720,8 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "OMAP4");
 	else if (soc_is_omap54xx())
 		return kasprintf(GFP_KERNEL, "OMAP5");
+	else if (soc_is_am33xx() || soc_is_am335x())
+		return kasprintf(GFP_KERNEL, "AM33xx");
 	else if (soc_is_am43xx())
 		return kasprintf(GFP_KERNEL, "AM43xx");
 	else if (soc_is_dra7xx())