Merge branch 'clk-rockchip' into clk-next

Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt

@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+			"rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};

Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt

@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};

Documentation/devicetree/bindings/clock/rockchip.txt

@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
 
 == Gate clocks ==
 
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
 The gate registers form a continuos block which makes the dt node
 structure a matter of taste, as either all gates can be put into
 one gate clock spanning all registers or they can be divided into

arch/arm/mach-rockchip/Kconfig

@@ -2,6 +2,7 @@ config ARCH_ROCKCHIP
 	bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0

drivers/clk/clk-composite.c

@@ -64,11 +64,56 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
 	const struct clk_ops *mux_ops = composite->mux_ops;
 	struct clk_hw *rate_hw = composite->rate_hw;
 	struct clk_hw *mux_hw = composite->mux_hw;
+	struct clk *parent;
+	unsigned long parent_rate;
+	long tmp_rate, best_rate = 0;
+	unsigned long rate_diff;
+	unsigned long best_rate_diff = ULONG_MAX;
+	int i;
 
 	if (rate_hw && rate_ops && rate_ops->determine_rate) {
 		rate_hw->clk = hw->clk;
 		return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
 						best_parent_p);
+	} else if (rate_hw && rate_ops && rate_ops->round_rate &&
+		   mux_hw && mux_ops && mux_ops->set_parent) {
+		*best_parent_p = NULL;
+
+		if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
+			*best_parent_p = clk_get_parent(mux_hw->clk);
+			*best_parent_rate = __clk_get_rate(*best_parent_p);
+
+			return rate_ops->round_rate(rate_hw, rate,
+						    best_parent_rate);
+		}
+
+		for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
+			parent = clk_get_parent_by_index(mux_hw->clk, i);
+			if (!parent)
+				continue;
+
+			parent_rate = __clk_get_rate(parent);
+
+			tmp_rate = rate_ops->round_rate(rate_hw, rate,
+							&parent_rate);
+			if (tmp_rate < 0)
+				continue;
+
+			rate_diff = abs(rate - tmp_rate);
+
+			if (!rate_diff || !*best_parent_p
+				       || best_rate_diff > rate_diff) {
+				*best_parent_p = parent;
+				*best_parent_rate = parent_rate;
+				best_rate_diff = rate_diff;
+				best_rate = tmp_rate;
+			}
+
+			if (!rate_diff)
+				return rate;
+		}
+
+		return best_rate;
 	} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
 		mux_hw->clk = hw->clk;
 		return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
@@ -162,15 +207,16 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
 	clk_composite_ops = &composite->ops;
 
 	if (mux_hw && mux_ops) {
-		if (!mux_ops->get_parent || !mux_ops->set_parent) {
+		if (!mux_ops->get_parent) {
 			clk = ERR_PTR(-EINVAL);
 			goto err;
 		}
 
 		composite->mux_hw = mux_hw;
 		composite->mux_ops = mux_ops;
 		clk_composite_ops->get_parent = clk_composite_get_parent;
-		clk_composite_ops->set_parent = clk_composite_set_parent;
+		if (mux_ops->set_parent)
+			clk_composite_ops->set_parent = clk_composite_set_parent;
 		if (mux_ops->determine_rate)
 			clk_composite_ops->determine_rate = clk_composite_determine_rate;
 	}
@@ -180,24 +226,27 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
 			clk = ERR_PTR(-EINVAL);
 			goto err;
 		}
+		clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
 
-		/* .round_rate is a prerequisite for .set_rate */
-		if (rate_ops->round_rate) {
-			clk_composite_ops->round_rate = clk_composite_round_rate;
-			if (rate_ops->set_rate) {
-				clk_composite_ops->set_rate = clk_composite_set_rate;
-			}
-		} else {
-			WARN(rate_ops->set_rate,
-				"%s: missing round_rate op is required\n",
-				__func__);
+		if (rate_ops->determine_rate)
+			clk_composite_ops->determine_rate =
+				clk_composite_determine_rate;
+		else if (rate_ops->round_rate)
+			clk_composite_ops->round_rate =
+				clk_composite_round_rate;
+
+		/* .set_rate requires either .round_rate or .determine_rate */
+		if (rate_ops->set_rate) {
+			if (rate_ops->determine_rate || rate_ops->round_rate)
+				clk_composite_ops->set_rate =
+						clk_composite_set_rate;
+			else
+				WARN(1, "%s: missing round_rate op is required\n",
+						__func__);
 		}
 
 		composite->rate_hw = rate_hw;
 		composite->rate_ops = rate_ops;
-		clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
-		if (rate_ops->determine_rate)
-			clk_composite_ops->determine_rate = clk_composite_determine_rate;
 	}
 
 	if (gate_hw && gate_ops) {

drivers/clk/rockchip/Makefile

@@ -3,3 +3,9 @@
 #
 
 obj-y	+= clk-rockchip.o
+obj-y	+= clk.o
+obj-y	+= clk-pll.o
+obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
+
+obj-y	+= clk-rk3188.o
+obj-y	+= clk-rk3288.o