net: phy: aquantia: add support for auto-negotiation configuration

Make use of the generic c45 code, plus code specific to the Aquantia
phy for 1000BaseT negotiation.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/aquantia.c

@@ -20,6 +20,10 @@
 #define PHY_ID_AQCS109	0x03a1b5c2
 #define PHY_ID_AQR405	0x03a1b4b0
 
+#define MDIO_AN_VEND_PROV			0xc400
+#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
+#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
+
 #define MDIO_AN_TX_VEND_STATUS1			0xc800
 #define MDIO_AN_TX_VEND_STATUS1_10BASET		(0x0 << 1)
 #define MDIO_AN_TX_VEND_STATUS1_100BASETX	(0x1 << 1)
@@ -64,10 +68,40 @@
 
 static int aqr_config_aneg(struct phy_device *phydev)
 {
-	linkmode_copy(phydev->supported, phy_10gbit_features);
-	linkmode_copy(phydev->advertising, phydev->supported);
+	bool changed = false;
+	u16 reg;
+	int ret;
 
-	return 0;
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
+	reg = 0;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+				     MDIO_AN_VEND_PROV_1000BASET_HALF |
+				     MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
 static int aqr_config_intr(struct phy_device *phydev)