Merge tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tmlind/linux-omap into fixes

Merge omap fixes for v4.1, urgent fix to avoid potential hardware damage From Tony Lindgren:

Omap fixes for the -rc cycle, including a fix for potential hardware
breakage on BeagleBones:

- BeagleBones don't support RTC-only mode, it can cause hardware
  damage if system-power-controller is specified without
  ti,pmic-shutdown-controller

- Fix a recent regression to am3517 SoCs caused by the recent clock
  move that was not noticed until now despite automated boot
  testing

- Fix a regression for n900 touchscreen triggered by recent
  recent input changes

- Fix compatible property for dm816x USB to avoid errors with
  USB Ethernet

- Fix oops for omap3 when built with CONFIG_THUMB2_KERNEL

* tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
  ARM: dts: AM35xx: fix system control module clocks
  ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900
  ARM: dts: Fix dm816x to use right compatible flag for MUSB
  ARM: OMAP3: Fix booting with thumb2 kernel

Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt

@@ -32,8 +32,8 @@ Example:
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -223,6 +223,25 @@
 /include/ "tps65217.dtsi"
 
 &tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";

arch/arm/boot/dts/am35xx-clocks.dtsi

@@ -12,55 +12,55 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <1>;
 	};
 
 	emac_fck: emac_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <9>;
 	};
 
 	vpfe_ick: vpfe_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <2>;
 	};
 
 	vpfe_fck: vpfe_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <10>;
 	};
 
 	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <0>;
 	};
 
 	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <8>;
 	};
 
 	hecc_ck: hecc_ck {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <3>;
 	};
 };

arch/arm/boot/dts/dm816x.dtsi

@@ -382,7 +382,7 @@
 			ti,hwmods = "usb_otg_hs";
 
 			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401400 0x400
 				       0x47401000 0x200>;
 				reg-names = "mc", "control";
@@ -422,7 +422,7 @@
 			};
 
 			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";

arch/arm/boot/dts/omap3-n900.dts

@@ -832,8 +832,8 @@
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

arch/arm/mach-omap2/sleep34xx.S

@@ -203,23 +203,8 @@ save_context_wfi:
 	 */
 	ldr	r1, kernel_flush
 	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
 	b	omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
 omap3_do_wfi_sram_addr:
 	.word omap3_do_wfi_sram
 kernel_flush:
@@ -364,10 +349,7 @@ exit_nonoff_modes:
  * ===================================
  */
 	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
 sdrc_power:
 	.word	SDRC_POWER_V
 cm_idlest1_core: