Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 …

…into devel-stable

arch/arm/Kconfig

@@ -363,7 +363,7 @@ config ARCH_MXS
 	bool "Freescale MXS-based"
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	help
 	  Support for Freescale MXS-based family of processors
 

arch/arm/mach-imx/Kconfig

@@ -243,6 +243,7 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX27PDK platform. This includes specific

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -37,12 +37,15 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/ulpi.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
 
 #include "devices-imx27.h"
 
 #define SD1_EN_GPIO (GPIO_PORTB + 25)
 #define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
 #define SPI2_SS0 (GPIO_PORTD + 21)
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -215,10 +218,10 @@ static struct regulator_init_data vgen_init = {
 
 static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
 	{
-		.id = MC13783_REGU_VMMC1,
+		.id = MC13783_REG_VMMC1,
 		.init_data = &vmmc1_init,
 	}, {
-		.id = MC13783_REGU_VGEN,
+		.id = MC13783_REG_VGEN,
 		.init_data = &vgen_init,
 	},
 };
@@ -276,6 +279,9 @@ static void __init mx27pdk_init(void)
 	imx27_add_spi_imx1(&spi2_pdata);
 	spi_register_board_info(mx27_3ds_spi_devs,
 						ARRAY_SIZE(mx27_3ds_spi_devs));
+
+	if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
 }
 
 static void __init mx27pdk_timer_init(void)

arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -147,10 +147,10 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 		.init_data = &pwgtx_init,
 	}, {
 
-		.id = MC13783_REGU_GPO1, /* Turn on 1.8V */
+		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
 		.init_data = &gpo_init,
 	}, {
-		.id = MC13783_REGU_GPO3, /* Turn on 3.3V */
+		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
 	},
 };

arch/arm/mach-mx5/Kconfig

@@ -50,6 +50,7 @@ config MACH_MX51_BABBAGE
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -77,6 +78,7 @@ choice
 config MACH_EUKREA_MBIMX51_BASEBOARD
 	prompt "Eukrea MBIMX51 development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -124,10 +126,28 @@ config MACH_MX53_EVK
 	bool "Support MX53 EVK platforms"
 	select SOC_IMX53
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX53 EVK platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX53_SMD
+	bool "Support MX53 SMD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX53 SMD platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+	bool "Support MX53 LOCO platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX53 LOCO platform. This includes specific
+	  configurations for the board and its peripherals.
 
 config MACH_MX50_RDP
 	bool "Support MX50 reference design platform"

arch/arm/mach-mx5/Makefile

@@ -10,6 +10,8 @@ obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -12,7 +12,6 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
@@ -120,14 +119,14 @@ static int mx51_3ds_board_keymap[] = {
 	KEY(3, 5, KEY_BACK)
 };
 
-static struct matrix_keymap_data mx51_3ds_map_data = {
+static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
 	.keymap		= mx51_3ds_board_keymap,
 	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
 };
 
 static void mxc_init_keypad(void)
 {
-	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+	imx51_add_imx_keypad(&mx51_3ds_map_data);
 }
 #else
 static inline void mxc_init_keypad(void)

arch/arm/mach-mx5/board-mx53_evk.c

@@ -21,6 +21,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/fec.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -29,6 +34,10 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
+#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
+#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
+
 #include "crm_regs.h"
 #include "devices-imx53.h"
 
@@ -47,6 +56,14 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
 	MX53_PAD_ATA_CS_1__UART3_RXD,
 	MX53_PAD_ATA_DA_1__UART3_CTS,
 	MX53_PAD_ATA_DA_2__UART3_RTS,
+
+	MX53_PAD_EIM_D16__CSPI1_SCLK,
+	MX53_PAD_EIM_D17__CSPI1_MISO,
+	MX53_PAD_EIM_D18__CSPI1_MOSI,
+
+	/* ecspi chip select lines */
+	MX53_PAD_EIM_EB2__GPIO_2_30,
+	MX53_PAD_EIM_D19__GPIO_3_19,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
@@ -60,11 +77,68 @@ static inline void mx53_evk_init_uart(void)
 	imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
 }
 
+static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static inline void mx53_evk_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(SMD_FEC_PHY_RST, 0);
+	gpio_set_value(SMD_FEC_PHY_RST, 0);
+	msleep(1);
+	gpio_set_value(SMD_FEC_PHY_RST, 1);
+}
+
+static struct fec_platform_data mx53_evk_fec_pdata = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
+	{
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+		.platform_data = NULL,
+	},
+};
+
+static int mx53_evk_spi_cs[] = {
+	EVK_ECSPI1_CS0,
+	EVK_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx53_evk_spi_data __initconst = {
+	.chipselect     = mx53_evk_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
+};
+
 static void __init mx53_evk_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
 					ARRAY_SIZE(mx53_evk_pads));
 	mx53_evk_init_uart();
+	mx53_evk_fec_reset();
+	imx53_add_fec(&mx53_evk_fec_pdata);
+
+	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
+	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
+
+	imx53_add_sdhci_esdhc_imx(0, NULL);
+	imx53_add_sdhci_esdhc_imx(1, NULL);
+
+	spi_register_board_info(mx53_evk_spi_board_info,
+		ARRAY_SIZE(mx53_evk_spi_board_info));
+	imx53_add_ecspi(0, &mx53_evk_spi_data);
 }
 
 static void __init mx53_evk_timer_init(void)

arch/arm/mach-mx5/board-mx53_loco.c

@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/fec.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+
+static iomux_v3_cfg_t mx53_loco_pads[] = {
+	MX53_PAD_CSI0_D10__UART1_TXD,
+	MX53_PAD_CSI0_D11__UART1_RXD,
+	MX53_PAD_ATA_DIOW__UART1_TXD,
+	MX53_PAD_ATA_DMACK__UART1_RXD,
+
+	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
+	MX53_PAD_ATA_DMARQ__UART2_TXD,
+	MX53_PAD_ATA_DIOR__UART2_RTS,
+	MX53_PAD_ATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_ATA_CS_0__UART3_TXD,
+	MX53_PAD_ATA_CS_1__UART3_RXD,
+	MX53_PAD_ATA_DA_1__UART3_CTS,
+	MX53_PAD_ATA_DA_2__UART3_RTS,
+};
+
+static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mx53_loco_init_uart(void)
+{
+	imx53_add_imx_uart(0, &mx53_loco_uart_data);
+	imx53_add_imx_uart(1, &mx53_loco_uart_data);
+	imx53_add_imx_uart(2, &mx53_loco_uart_data);
+}
+
+static inline void mx53_loco_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
+	msleep(1);
+	gpio_set_value(LOCO_FEC_PHY_RST, 1);
+}
+
+static struct fec_platform_data mx53_loco_fec_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init mx53_loco_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+					ARRAY_SIZE(mx53_loco_pads));
+	mx53_loco_init_uart();
+	mx53_loco_fec_reset();
+	imx53_add_fec(&mx53_loco_fec_data);
+}
+
+static void __init mx53_loco_timer_init(void)
+{
+	mx53_clocks_init(32768, 24000000, 0, 0);
+}
+
+static struct sys_timer mx53_loco_timer = {
+	.init	= mx53_loco_timer_init,
+};
+
+MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
+	.map_io = mx53_map_io,
+	.init_irq = mx53_init_irq,
+	.init_machine = mx53_loco_board_init,
+	.timer = &mx53_loco_timer,
+MACHINE_END