arm64: mm: fix booting with 52-bit address space

Joey reports that booting 52-bit VA capable builds on 52-bit VA capable
CPUs is broken since commit 0d9b1ff ("arm64: mm: make vabits_actual
a build time constant if possible"). This is due to the fact that the
primary CPU reads the vabits_actual variable before it has been
assigned.

The reason for deferring the assignment of vabits_actual was that we try
to perform as few stores to memory as we can with the MMU and caches
off, due to the cache coherency issues it creates.

Since __cpu_setup() [which is where the read of vabits_actual occurs] is
also called on the secondary boot path, we cannot just read the CPU ID
registers directly, given that the size of the VA space is decided by
the capabilities of the primary CPU. So let's read vabits_actual only on
the secondary boot path, and read the CPU ID registers directly on the
primary boot path, by making it a function parameter of __cpu_setup().

To ensure that all users of vabits_actual (including kasan_early_init())
observe the correct value, move the assignment of vabits_actual back
into asm code, but still defer it to after the MMU and caches have been
enabled.

Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0d9b1ff ("arm64: mm: make vabits_actual a build time constant if possible")
Reported-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220701111045.2944309-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arch/arm64/kernel/head.S

@@ -82,6 +82,7 @@
 	 *  x22        create_idmap() .. start_kernel()         ID map VA of the DT blob
 	 *  x23        primary_entry() .. start_kernel()        physical misalignment/KASLR offset
 	 *  x24        __primary_switch()                       linear map KASLR seed
+	 *  x25        primary_entry() .. start_kernel()        supported VA size
 	 *  x28        create_idmap()                           callee preserved temp register
 	 */
 SYM_CODE_START(primary_entry)
@@ -96,6 +97,14 @@ SYM_CODE_START(primary_entry)
 	 * On return, the CPU will be ready for the MMU to be turned on and
 	 * the TCR will have been set.
 	 */
+#if VA_BITS > 48
+	mrs_s	x0, SYS_ID_AA64MMFR2_EL1
+	tst	x0, #0xf << ID_AA64MMFR2_LVA_SHIFT
+	mov	x0, #VA_BITS
+	mov	x25, #VA_BITS_MIN
+	csel	x25, x25, x0, eq
+	mov	x0, x25
+#endif
 	bl	__cpu_setup			// initialise processor
 	b	__primary_switch
 SYM_CODE_END(primary_entry)
@@ -434,6 +443,12 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 	bl	__pi_memset
 	dsb	ishst				// Make zero page visible to PTW
 
+#if VA_BITS > 48
+	adr_l	x8, vabits_actual		// Set this early so KASAN early init
+	str	x25, [x8]			// ... observes the correct value
+	dc	civac, x8			// Make visible to booting secondaries
+#endif
+
 #ifdef CONFIG_RANDOMIZE_BASE
 	adrp	x5, memstart_offset_seed	// Save KASLR linear map seed
 	strh	w24, [x5, :lo12:memstart_offset_seed]
@@ -579,6 +594,9 @@ SYM_FUNC_START_LOCAL(secondary_startup)
 	mov	x20, x0				// preserve boot mode
 	bl	switch_to_vhe
 	bl	__cpu_secondary_check52bitva
+#if VA_BITS > 48
+	ldr_l	x0, vabits_actual
+#endif
 	bl	__cpu_setup			// initialise processor
 	adrp	x1, swapper_pg_dir
 	adrp	x2, idmap_pg_dir

arch/arm64/mm/init.c

@@ -265,20 +265,7 @@ early_param("mem", early_mem);
 
 void __init arm64_memblock_init(void)
 {
-	s64 linear_region_size;
-
-#if VA_BITS > 48
-	if (cpuid_feature_extract_unsigned_field(
-				read_sysreg_s(SYS_ID_AA64MMFR2_EL1),
-				ID_AA64MMFR2_LVA_SHIFT))
-		vabits_actual = VA_BITS;
-
-	/* make the variable visible to secondaries with the MMU off */
-	dcache_clean_inval_poc((u64)&vabits_actual,
-			       (u64)&vabits_actual + sizeof(vabits_actual));
-#endif
-
-	linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
 
 	/*
 	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may

arch/arm64/mm/proc.S

@@ -397,6 +397,8 @@ SYM_FUNC_END(idmap_kpti_install_ng_mappings)
  *
  *	Initialise the processor for turning the MMU on.
  *
+ * Input:
+ *	x0 - actual number of VA bits (ignored unless VA_BITS > 48)
  * Output:
  *	Return in x0 the value of the SCTLR_EL1 register.
  */
@@ -466,8 +468,7 @@ SYM_FUNC_START(__cpu_setup)
 	tcr_clear_errata_bits tcr, x9, x5
 
 #ifdef CONFIG_ARM64_VA_BITS_52
-	ldr_l		x9, vabits_actual
-	sub		x9, xzr, x9
+	sub		x9, xzr, x0
 	add		x9, x9, #64
 	tcr_set_t1sz	tcr, x9
 #else