Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala.

 2) Fix neighbour table entry leak in rocker driver, from Ying Xue.

 3) Do not emit bonding notifications for unregistered interfaces, from
    Nicolas Dichtel.

 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent
    Fourcot.

 5) Fix regression in ipv6 multicast filter test, from Henning Rogge.

 6) do_replace() in various footables netfilter modules is missing a
    check for 0 counters in the datastructure provided by the user.  Fix
    from Dave Jones, and found with trinity.

 7) Fix RCU bug in packet scheduler classifier module unloads, from
    Daniel Borkmann.

 8) Avoid deadlock in tcp_get_info() by using u64_sync.  From Eric
    Dumzaet.

 9) Input packet processing can race with inetdev_destroy() teardown,
    fix potential OOPS in ip_error() by explicitly testing whether the
    inetdev is still attached.  From Eric W Biederman.

10) MLDv2 parser in bridge multicast code breaks too early while
    parsing.  Fix from Thadeu Lima de Souza Cascardo.

11) Asking for settings on non-zero PHYID doesn't work because we do not
    import the command structure from the user and use the PHYID
    provided there.  Fix from Arun Parameswaran.

12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich.

13) Missing NF_TABLES depends for TPROXY etc can cause build failures,
    fix from Florian Westphal.

14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly,
    from Jesper Dangaard Brouer.

15) If netlink autobind retry fails, we have to reset the sockets portid
    back to zero.  From Herbert Xu.

16) VXLAN netns exit code unregisters using wrong device, from John W
    Linville.

17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from
    Dmitry Tunin and Wen-chien Jesse Sung.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  bridge: fix lockdep splat
  net: core: 'ethtool' issue with querying phy settings
  bridge: fix parsing of MLDv2 reports
  ARM: zynq: DT: Use the zynq binding with macb
  net: macb: Disable half duplex gigabit on Zynq
  net: macb: Document zynq gem dt binding
  ipv4: fill in table id when replacing a route
  cdc_ncm: Fix tx_bytes statistics
  ipv4: Avoid crashing in ip_error
  tcp: fix a potential deadlock in tcp_get_info()
  net: sched: fix call_rcu() race on classifier module unloads
  net: phy: Make sure phy_start() always re-enables the phy interrupts
  ipv6: fix ECMP route replacement
  ipv6: do not delete previously existing ECMP routes if add fails
  Revert "netfilter: bridge: query conntrack about skb dnat"
  netfilter: ensure number of counters is >0 in do_replace()
  netfilter: nfnetlink_{log,queue}: Register pernet in first place
  tcp: don't over-send F-RTO probes
  tcp: only undo on partial ACKs in CA_Loss
  net/ipv6/udp: Fix ipv6 multicast socket filter regression
  ...

Documentation/devicetree/bindings/net/cdns-emac.txt

@@ -3,7 +3,8 @@
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{emac}"
   Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  or the generic form: "cdns,emac".
+  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
+  Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
 - phy-mode: see ethernet.txt file in the same directory.

arch/arm/boot/dts/zynq-7000.dtsi

@@ -193,7 +193,7 @@
 		};
 
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
@@ -204,7 +204,7 @@
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynq-gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;

drivers/bluetooth/ath3k.c

@@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3007) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x04CA, 0x300b) },
+	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0930, 0x0220) },
@@ -104,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe003) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
+	{ USB_DEVICE(0x0CF3, 0xE006) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
@@ -143,6 +145,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -158,6 +161,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -186,6 +186,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -202,6 +203,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
@@ -218,6 +220,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
 

drivers/net/bonding/bond_options.c

@@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond,
 out:
 	if (ret)
 		bond_opt_error_interpret(bond, opt, ret, val);
-	else
+	else if (bond->dev->reg_state == NETREG_REGISTERED)
 		call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
 
 	return ret;

drivers/net/ethernet/cadence/macb.c

@@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev)
 	else
 		phydev->supported &= PHY_BASIC_FEATURES;
 
+	if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
+		phydev->supported &= ~SUPPORTED_1000baseT_Half;
+
 	phydev->advertising = phydev->supported;
 
 	bp->link = 0;
@@ -1037,6 +1040,12 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 		 * add that if/when we get our hands on a full-blown MII PHY.
 		 */
 
+		/* There is a hardware issue under heavy load where DMA can
+		 * stop, this causes endless "used buffer descriptor read"
+		 * interrupts but it can be cleared by re-enabling RX. See
+		 * the at91 manual, section 41.3.1 or the Zynq manual
+		 * section 16.7.4 for details.
+		 */
 		if (status & MACB_BIT(RXUBR)) {
 			ctrl = macb_readl(bp, NCR);
 			macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE));
@@ -2693,6 +2702,14 @@ static const struct macb_config emac_config = {
 	.init = at91ether_init,
 };
 
+static const struct macb_config zynq_config = {
+	.caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE |
+		MACB_CAPS_NO_GIGABIT_HALF,
+	.dma_burst_length = 16,
+	.clk_init = macb_clk_init,
+	.init = macb_init,
+};
+
 static const struct of_device_id macb_dt_ids[] = {
 	{ .compatible = "cdns,at32ap7000-macb" },
 	{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
@@ -2703,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = {
 	{ .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config },
 	{ .compatible = "cdns,at91rm9200-emac", .data = &emac_config },
 	{ .compatible = "cdns,emac", .data = &emac_config },
+	{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, macb_dt_ids);

drivers/net/ethernet/cadence/macb.h

@@ -393,6 +393,7 @@
 #define MACB_CAPS_ISR_CLEAR_ON_WRITE		0x00000001
 #define MACB_CAPS_USRIO_HAS_CLKEN		0x00000002
 #define MACB_CAPS_USRIO_DEFAULT_IS_MII		0x00000004
+#define MACB_CAPS_NO_GIGABIT_HALF		0x00000008
 #define MACB_CAPS_FIFO_MODE			0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
 #define MACB_CAPS_SG_DISABLED			0x40000000

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

@@ -3187,7 +3187,7 @@ int mlx4_SW2HW_CQ_wrapper(struct mlx4_dev *dev, int slave,
 	int cqn = vhcr->in_modifier;
 	struct mlx4_cq_context *cqc = inbox->buf;
 	int mtt_base = cq_get_mtt_addr(cqc) / dev->caps.mtt_entry_sz;
-	struct res_cq *cq;
+	struct res_cq *cq = NULL;
 	struct res_mtt *mtt;
 
 	err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_HW, &cq);
@@ -3223,7 +3223,7 @@ int mlx4_HW2SW_CQ_wrapper(struct mlx4_dev *dev, int slave,
 {
 	int err;
 	int cqn = vhcr->in_modifier;
-	struct res_cq *cq;
+	struct res_cq *cq = NULL;
 
 	err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_ALLOCATED, &cq);
 	if (err)
@@ -3362,7 +3362,7 @@ int mlx4_SW2HW_SRQ_wrapper(struct mlx4_dev *dev, int slave,
 	int err;
 	int srqn = vhcr->in_modifier;
 	struct res_mtt *mtt;
-	struct res_srq *srq;
+	struct res_srq *srq = NULL;
 	struct mlx4_srq_context *srqc = inbox->buf;
 	int mtt_base = srq_get_mtt_addr(srqc) / dev->caps.mtt_entry_sz;
 
@@ -3406,7 +3406,7 @@ int mlx4_HW2SW_SRQ_wrapper(struct mlx4_dev *dev, int slave,
 {
 	int err;
 	int srqn = vhcr->in_modifier;
-	struct res_srq *srq;
+	struct res_srq *srq = NULL;
 
 	err = srq_res_start_move_to(dev, slave, srqn, RES_SRQ_ALLOCATED, &srq);
 	if (err)

drivers/net/ethernet/rocker/rocker.c

@@ -2921,10 +2921,11 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port,
 	struct neighbour *n = __ipv4_neigh_lookup(dev, (__force u32)ip_addr);
 	int err = 0;
 
-	if (!n)
+	if (!n) {
 		n = neigh_create(&arp_tbl, &ip_addr, dev);
-	if (!n)
-		return -ENOMEM;
+		if (IS_ERR(n))
+			return IS_ERR(n);
+	}
 
 	/* If the neigh is already resolved, then go ahead and
 	 * install the entry, otherwise start the ARP process to
@@ -2936,6 +2937,7 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port,
 	else
 		neigh_event_send(n, NULL);
 
+	neigh_release(n);
 	return err;
 }
 

drivers/net/phy/phy.c

@@ -742,6 +742,9 @@ EXPORT_SYMBOL(phy_stop);
  */
 void phy_start(struct phy_device *phydev)
 {
+	bool do_resume = false;
+	int err = 0;
+
 	mutex_lock(&phydev->lock);
 
 	switch (phydev->state) {
@@ -752,11 +755,22 @@ void phy_start(struct phy_device *phydev)
 		phydev->state = PHY_UP;
 		break;
 	case PHY_HALTED:
+		/* make sure interrupts are re-enabled for the PHY */
+		err = phy_enable_interrupts(phydev);
+		if (err < 0)
+			break;
+
 		phydev->state = PHY_RESUMING;
+		do_resume = true;
+		break;
 	default:
 		break;
 	}
 	mutex_unlock(&phydev->lock);
+
+	/* if phy was suspended, bring the physical link up again */
+	if (do_resume)
+		phy_resume(phydev);
 }
 EXPORT_SYMBOL(phy_start);
 
@@ -769,7 +783,7 @@ void phy_state_machine(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct phy_device *phydev =
 			container_of(dwork, struct phy_device, state_queue);
-	bool needs_aneg = false, do_suspend = false, do_resume = false;
+	bool needs_aneg = false, do_suspend = false;
 	int err = 0;
 
 	mutex_lock(&phydev->lock);
@@ -888,14 +902,6 @@ void phy_state_machine(struct work_struct *work)
 		}
 		break;
 	case PHY_RESUMING:
-		err = phy_clear_interrupt(phydev);
-		if (err)
-			break;
-
-		err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-		if (err)
-			break;
-
 		if (AUTONEG_ENABLE == phydev->autoneg) {
 			err = phy_aneg_done(phydev);
 			if (err < 0)
@@ -933,7 +939,6 @@ void phy_state_machine(struct work_struct *work)
 			}
 			phydev->adjust_link(phydev->attached_dev);
 		}
-		do_resume = true;
 		break;
 	}
 
@@ -943,8 +948,6 @@ void phy_state_machine(struct work_struct *work)
 		err = phy_start_aneg(phydev);
 	else if (do_suspend)
 		phy_suspend(phydev);
-	else if (do_resume)
-		phy_resume(phydev);
 
 	if (err < 0)
 		phy_error(phydev);
@@ -1053,13 +1056,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 {
 	/* According to 802.3az,the EEE is supported only in full duplex-mode.
 	 * Also EEE feature is active when core is operating with MII, GMII
-	 * or RGMII. Internal PHYs are also allowed to proceed and should
-	 * return an error if they do not support EEE.
+	 * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+	 * should return an error if they do not support EEE.
 	 */
 	if ((phydev->duplex == DUPLEX_FULL) &&
 	    ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
-	    (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+	    (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+	     phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) ||
 	     phy_is_internal(phydev))) {
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;

drivers/net/usb/cdc_ncm.c

@@ -1182,7 +1182,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
 	 * payload data instead.
 	 */
 	usbnet_set_skb_tx_stats(skb_out, n,
-				ctx->tx_curr_frame_payload - skb_out->len);
+				(long)ctx->tx_curr_frame_payload - skb_out->len);
 
 	return skb_out;
 

drivers/net/vxlan.c

@@ -2961,7 +2961,7 @@ static void __net_exit vxlan_exit_net(struct net *net)
 		 * to the list by the previous loop.
 		 */
 		if (!net_eq(dev_net(vxlan->dev), net))
-			unregister_netdevice_queue(dev, &list);
+			unregister_netdevice_queue(vxlan->dev, &list);
 	}
 
 	unregister_netdevice_many(&list);

include/linux/rhashtable.h

@@ -17,6 +17,7 @@
 #ifndef _LINUX_RHASHTABLE_H
 #define _LINUX_RHASHTABLE_H
 
+#include <linux/atomic.h>
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/jhash.h>
@@ -100,6 +101,7 @@ struct rhashtable;
  * @key_len: Length of key
  * @key_offset: Offset of key in struct to be hashed
  * @head_offset: Offset of rhash_head in struct to be hashed
+ * @insecure_max_entries: Maximum number of entries (may be exceeded)
  * @max_size: Maximum size while expanding
  * @min_size: Minimum size while shrinking
  * @nulls_base: Base value to generate nulls marker
@@ -115,6 +117,7 @@ struct rhashtable_params {
 	size_t			key_len;
 	size_t			key_offset;
 	size_t			head_offset;
+	unsigned int		insecure_max_entries;
 	unsigned int		max_size;
 	unsigned int		min_size;
 	u32			nulls_base;
@@ -286,6 +289,18 @@ static inline bool rht_grow_above_100(const struct rhashtable *ht,
 		(!ht->p.max_size || tbl->size < ht->p.max_size);
 }
 
+/**
+ * rht_grow_above_max - returns true if table is above maximum
+ * @ht:		hash table
+ * @tbl:	current table
+ */
+static inline bool rht_grow_above_max(const struct rhashtable *ht,
+				      const struct bucket_table *tbl)
+{
+	return ht->p.insecure_max_entries &&
+	       atomic_read(&ht->nelems) >= ht->p.insecure_max_entries;
+}
+
 /* The bucket lock is selected based on the hash and protects mutations
  * on a group of hash buckets.
  *
@@ -589,6 +604,10 @@ static inline int __rhashtable_insert_fast(
 		goto out;
 	}
 
+	err = -E2BIG;
+	if (unlikely(rht_grow_above_max(ht, tbl)))
+		goto out;
+
 	if (unlikely(rht_grow_above_100(ht, tbl))) {
 slow_path:
 		spin_unlock_bh(lock);

include/linux/skbuff.h

@@ -176,6 +176,7 @@ struct nf_bridge_info {
 	struct net_device	*physindev;
 	struct net_device	*physoutdev;
 	char			neigh_header[8];
+	__be32			ipv4_daddr;
 };
 #endif
 

include/linux/tcp.h

@@ -158,6 +158,8 @@ struct tcp_sock {
 				 * sum(delta(snd_una)), or how many bytes
 				 * were acked.
 				 */
+	struct u64_stats_sync syncp; /* protects 64bit vars (cf tcp_get_info()) */
+
  	u32	snd_una;	/* First byte we want an ack for	*/
  	u32	snd_sml;	/* Last byte of the most recently transmitted small packet */
 	u32	rcv_tstamp;	/* timestamp of last received ACK (for keepalives) */

include/net/inet_connection_sock.h

@@ -129,9 +129,10 @@ struct inet_connection_sock {
 
 		u32		  probe_timestamp;
 	} icsk_mtup;
-	u32			  icsk_ca_priv[16];
 	u32			  icsk_user_timeout;
-#define ICSK_CA_PRIV_SIZE	(16 * sizeof(u32))
+
+	u64			  icsk_ca_priv[64 / sizeof(u64)];
+#define ICSK_CA_PRIV_SIZE      (8 * sizeof(u64))
 };
 
 #define ICSK_TIME_RETRANS	1	/* Retransmit timer */