power: supply: axp288_fuel_gauge: Add axp288_fuel_gauge_read_initial_…

…regs()

Refactor probe a bit, introducing a new
axp288_fuel_gauge_read_initial_regs() helper. This replaces a whole
bunch of gotos and removes the unblock_punit_i2c_access label.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/axp288_fuel_gauge.c

@@ -611,6 +611,61 @@ static const struct dmi_system_id axp288_no_battery_list[] = {
 	{}
 };
 
+static int axp288_fuel_gauge_read_initial_regs(struct axp288_fg_info *info)
+{
+	unsigned int val;
+	int ret;
+
+	/*
+	 * On some devices the fuelgauge and charger parts of the axp288 are
+	 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
+	 */
+	ret = regmap_read(info->regmap, AXP20X_CC_CTRL, &val);
+	if (ret < 0)
+		return ret;
+	if (val == 0)
+		return -ENODEV;
+
+	ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & FG_DES_CAP1_VALID)) {
+		dev_err(info->dev, "axp288 not configured by firmware\n");
+		return -ENODEV;
+	}
+
+	ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
+	if (ret < 0)
+		return ret;
+	switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) {
+	case CHRG_CCCV_CV_4100MV:
+		info->max_volt = 4100;
+		break;
+	case CHRG_CCCV_CV_4150MV:
+		info->max_volt = 4150;
+		break;
+	case CHRG_CCCV_CV_4200MV:
+		info->max_volt = 4200;
+		break;
+	case CHRG_CCCV_CV_4350MV:
+		info->max_volt = 4350;
+		break;
+	}
+
+	ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE);
+	if (ret < 0)
+		return ret;
+	info->pwr_op = ret;
+
+	ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG);
+	if (ret < 0)
+		return ret;
+	info->low_cap = ret;
+
+	return 0;
+}
+
 static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 {
 	int i, ret = 0;
@@ -623,7 +678,6 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 		[BAT_VOLT] = "axp288-batt-volt",
 	};
 	struct device *dev = &pdev->dev;
-	unsigned int val;
 
 	if (dmi_check_system(axp288_no_battery_list))
 		return -ENODEV;
@@ -665,59 +719,8 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto out_free_iio_chan;
 
-	/*
-	 * On some devices the fuelgauge and charger parts of the axp288 are
-	 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
-	 */
-	ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
-	if (ret < 0)
-		goto unblock_punit_i2c_access;
-	if (val == 0) {
-		ret = -ENODEV;
-		goto unblock_punit_i2c_access;
-	}
-
-	ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
-	if (ret < 0)
-		goto unblock_punit_i2c_access;
-
-	if (!(ret & FG_DES_CAP1_VALID)) {
-		dev_err(&pdev->dev, "axp288 not configured by firmware\n");
-		ret = -ENODEV;
-		goto unblock_punit_i2c_access;
-	}
-
-	ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
-	if (ret < 0)
-		goto unblock_punit_i2c_access;
-	switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) {
-	case CHRG_CCCV_CV_4100MV:
-		info->max_volt = 4100;
-		break;
-	case CHRG_CCCV_CV_4150MV:
-		info->max_volt = 4150;
-		break;
-	case CHRG_CCCV_CV_4200MV:
-		info->max_volt = 4200;
-		break;
-	case CHRG_CCCV_CV_4350MV:
-		info->max_volt = 4350;
-		break;
-	}
-
-	ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE);
-	if (ret < 0)
-		goto unblock_punit_i2c_access;
-	info->pwr_op = ret;
-
-	ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG);
-	if (ret < 0)
-		goto unblock_punit_i2c_access;
-	info->low_cap = ret;
-
-unblock_punit_i2c_access:
+	ret = axp288_fuel_gauge_read_initial_regs(info);
 	iosf_mbi_unblock_punit_i2c_access();
-	/* In case we arrive here by goto because of a register access error */
 	if (ret < 0)
 		goto out_free_iio_chan;