Merge branch 'master' into for-4.4-fixes

The following commit which went into mainline through networking tree 3b13758 ("cgroups: Allow dynamically changing net_classid") conflicts in net/core/netclassid_cgroup.c with the following pending fix in cgroup/for-4.4-fixes. 1f7dd3e ("cgroup: fix handling of multi-destination migration from subtree_control enabling") The former separates out update_classid() from cgrp_attach() and updates it to walk all fds of all tasks in the target css so that it can be used from both migration and config change paths. The latter drops @css from cgrp_attach(). Resolve the conflict by making cgrp_attach() call update_classid() with the css from the first task. We can revive @tset walking in cgrp_attach() but given that net_cls is v1 only where there always is only one target css during migration, this is fine. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Nina Schiff <ninasc@fb.com>
mariux64 · Dec 7, 2015 · 0b98f0c · 0b98f0c
2 parents 67cde9c + 527e931
commit 0b98f0c
Show file tree

Hide file tree

Showing 885 changed files with 12,440 additions and 9,487 deletions.
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
@@ -587,7 +587,7 @@ used to control it:
 
   modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
       preaction=<preaction type> preop=<preop type> start_now=x
-      nowayout=x ifnum_to_use=n
+      nowayout=x ifnum_to_use=n panic_wdt_timeout=<t>
 
 ifnum_to_use specifies which interface the watchdog timer should use.
 The default is -1, which means to pick the first one registered.
@@ -597,7 +597,9 @@ is the amount of seconds before the reset that the pre-timeout panic will
 occur (if pretimeout is zero, then pretimeout will not be enabled).  Note
 that the pretimeout is the time before the final timeout.  So if the
 timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout
-will occur in 40 second (10 seconds before the timeout).
+will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout
+is the value of timeout which is set on kernel panic, in order to let actions
+such as kdump to occur during panic.
 
 The action may be "reset", "power_cycle", or "power_off", and
 specifies what to do when the timer times out, and defaults to
@@ -634,6 +636,7 @@ for configuring the watchdog:
 	ipmi_watchdog.preop=<preop type>
 	ipmi_watchdog.start_now=x
 	ipmi_watchdog.nowayout=x
+	ipmi_watchdog.panic_wdt_timeout=<t>
 
 The options are the same as the module parameter options.
 

diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
@@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:-
 The device tree documentation for the keystone machines are located at
         Documentation/devicetree/bindings/arm/keystone/keystone.txt
 
-Known issues & workaround
--------------------------
-
-Some of the device drivers used on keystone are re-used from that from
-DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
-Some of the keystone specific drivers such as netcp uses run time power
-management API instead to enable clock. As this API has limitations on
-keystone, following workaround is needed to boot Linux.
-
-   Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
-   clock frameworks will try to disable clocks that are unused and disable
-   the hardware. This is because netcp related power domain and clock
-   domains are enabled in u-boot as run time power management API currently
-   doesn't enable clocks for netcp due to a limitation. This workaround is
-   expected to be removed in the future when proper API support becomes
-   available. Until then, this work around is needed.
-
-
 Document Author
 ---------------
 Murali Karicheri <m-karicheri2@ti.com>

diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt
@@ -70,3 +70,6 @@ use_per_node_hctx=[0/1]: Default: 0
      parameter.
   1: The multi-queue block layer is instantiated with a hardware dispatch
      queue for each CPU node in the system.
+
+use_lightnvm=[0/1]: Default: 0
+  Register device with LightNVM. Requires blk-mq to be used.
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -8,13 +8,19 @@ Required properties:
 - phy-mode: See ethernet.txt file in the same directory
 - clocks: a pointer to the reference clock for this device.
 
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+  Value is presented in bytes. If not used, by default 1600B is set for
+  "marvell,armada-370-neta" and 9800B for others.
+
 Example:
 
 ethernet@d0070000 {
 	compatible = "marvell,armada-370-neta";
 	reg = <0xd0070000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
+	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -1,7 +1,9 @@
 * Temperature Sensor ADC (TSADC) on rockchip SoCs
 
 Required properties:
-- compatible : "rockchip,rk3288-tsadc"
+- compatible : should be "rockchip,<name>-tsadc"
+   "rockchip,rk3288-tsadc": found on RK3288 SoCs
+   "rockchip,rk3368-tsadc": found on RK3368 SoCs
 - reg : physical base address of the controller and length of memory mapped
 	region.
 - interrupts : The interrupt number to the cpu. The interrupt specifier format

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
@@ -32,6 +32,7 @@ Supported adapters:
   * Intel Sunrise Point-LP (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
-		no_acpi
-			Don't use ACPI processor performance control objects
-			_PSS and _PPC specified limits.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -318,7 +318,7 @@ M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
 S:	Supported
-F:	drivers/acpi/video.c
+F:	drivers/acpi/acpi_video.c
 
 ACPI WMI DRIVER
 L:	platform-driver-x86@vger.kernel.org
@@ -1847,7 +1847,7 @@ S:	Supported
 F:	drivers/net/wireless/ath/ath6kl/
 
 WILOCITY WIL6210 WIRELESS DRIVER
-M:	Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
+M:	Maya Erez <qca_merez@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 L:	wil6210@qca.qualcomm.com
 S:	Supported
@@ -1931,7 +1931,7 @@ S:	Supported
 F:	drivers/i2c/busses/i2c-at91.c
 
 ATMEL ISI DRIVER
-M:	Josh Wu <josh.wu@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/platform/soc_camera/atmel-isi.c
@@ -1950,7 +1950,8 @@ S:	Supported
 F:	drivers/net/ethernet/cadence/
 
 ATMEL NAND DRIVER
-M:	Josh Wu <josh.wu@atmel.com>
+M:	Wenyou Yang <wenyou.yang@atmel.com>
+M:	Josh Wu <rainyfeeling@outlook.com>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
 F:	drivers/mtd/nand/atmel_nand*
@@ -2449,7 +2450,9 @@ F:	drivers/firmware/broadcom/*
 
 BROADCOM STB NAND FLASH DRIVER
 M:	Brian Norris <computersforpeace@gmail.com>
+M:	Kamal Dasu <kdasu.kdev@gmail.com>
 L:	linux-mtd@lists.infradead.org
+L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/brcmnand/
 
@@ -2546,7 +2549,7 @@ F:	arch/c6x/
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com
+L:	linux-cachefs@redhat.com (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.txt
 F:	fs/cachefiles/
@@ -2929,10 +2932,9 @@ S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 CONEXANT ACCESSRUNNER USB DRIVER
-M:	Simon Arlott <cxacru@fire.lp0.eu>
 L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
@@ -4409,6 +4411,7 @@ K:	fmc_d.*register
 
 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@opensource.altera.com>
+R:	Moritz Fischer <moritz.fischer@ettus.com>
 S:	Maintained
 F:	drivers/fpga/
 F:	include/linux/fpga/fpga-mgr.h
@@ -4559,7 +4562,7 @@ F:	include/linux/frontswap.h
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com
+L:	linux-cachefs@redhat.com (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/filesystems/caching/
 F:	fs/fscache/
@@ -5711,13 +5714,6 @@ M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
-IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-M:	Francois Romieu <romieu@fr.zoreil.com>
-M:	Sorbica Shieh <sorbica@icplus.com.tw>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/icplus/ipg.*
-
 IPATH DRIVER
 M:	Mike Marciniszyn <infinipath@intel.com>
 L:	linux-rdma@vger.kernel.org
@@ -6371,6 +6367,7 @@ F:	arch/*/include/asm/pmem.h
 LIGHTNVM PLATFORM SUPPORT
 M:	Matias Bjorling <mb@lightnvm.io>
 W:	http://github/OpenChannelSSD
+L:	linux-block@vger.kernel.org
 S:	Maintained
 F:	drivers/lightnvm/
 F:	include/linux/lightnvm.h
@@ -6923,13 +6920,21 @@ F:	drivers/scsi/megaraid.*
 F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
-M:	Amir Vadai <amirv@mellanox.com>
+M: 	Eugenia Emantayev <eugenia@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlx4/en_*
 
+MELLANOX ETHERNET DRIVER (mlx5e)
+M:	Saeed Mahameed <saeedm@mellanox.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+W:	http://www.mellanox.com
+Q:	http://patchwork.ozlabs.org/project/netdev/list/
+F:	drivers/net/ethernet/mellanox/mlx5/core/en_*
+
 MELLANOX ETHERNET SWITCH DRIVERS
 M:	Jiri Pirko <jiri@mellanox.com>
 M:	Ido Schimmel <idosch@mellanox.com>
@@ -7901,6 +7906,18 @@ S:	Maintained
 F:	net/openvswitch/
 F:	include/uapi/linux/openvswitch.h
 
+OPERATING PERFORMANCE POINTS (OPP)
+M:	Viresh Kumar <vireshk@kernel.org>
+M:	Nishanth Menon <nm@ti.com>
+M:	Stephen Boyd <sboyd@codeaurora.org>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
+F:	drivers/base/power/opp/
+F:	include/linux/pm_opp.h
+F:	Documentation/power/opp.txt
+F:	Documentation/devicetree/bindings/opp/
+
 OPL4 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -9314,7 +9331,6 @@ F:	drivers/i2c/busses/i2c-designware-*
 F:	include/linux/platform_data/i2c-designware.h
 
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
-M:	Seungwon Jeon <tgih.jun@samsung.com>
 M:	Jaehoon Chung <jh80.chung@samsung.com>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
@@ -9411,8 +9427,10 @@ F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
 M:	"James E.J. Bottomley" <JBottomley@odin.com>
-L:	linux-scsi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git
+M:	"Martin K. Petersen" <martin.petersen@oracle.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
+L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/
 F:	include/scsi/
@@ -10887,9 +10905,9 @@ S:	Maintained
 F:	drivers/media/tuners/tua9001*
 
 TULIP NETWORK DRIVERS
-M:	Grant Grundler <grundler@parisc-linux.org>
 L:	netdev@vger.kernel.org
-S:	Maintained
+L:	linux-parisc@vger.kernel.org
+S:	Orphan
 F:	drivers/net/ethernet/dec/tulip/
 
 TUN/TAP driver

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y

diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y

diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y

diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set

diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set

diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set

diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y

diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set

diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set

diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
@@ -37,6 +37,9 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
+/* SLEEP needs default irq priority (<=) which can interrupt the doze */
+#define ISA_SLEEP_ARG		(0x10 | ARCV2_IRQ_DEF_PRIO)
+
 #ifndef __ASSEMBLY__
 
 /*

diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
@@ -43,6 +43,8 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
+#define ISA_SLEEP_ARG		0x3
+
 #ifndef __ASSEMBLY__
 
 /******************************************************************

diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
@@ -58,8 +58,6 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
 		"st      sp, [r24]       \n\t"
 #endif
 
-		"sync   \n\t"
-
 		/*
 		 * setup _current_task with incoming tsk.
 		 * optionally, set r25 to that as well

diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
@@ -44,9 +44,6 @@ __switch_to:
 	* don't need to do anything special to return it
 	*/
 
-	/* hardware memory barrier */
-	sync
-
 	/*
 	 * switch to new task, contained in r1
 	 * Temp reg r3 is required to get the ptr to store val