Merge branches 'topic/vsp1' and 'topic/adv76xx' of git://git.kernel.o…

…rg/pub/scm/linux/kernel/git/mchehab/linux-media into next

Pull updates and DT support for media engines from Mauro Carvalho Chehab.

For Analog Devices ADV7604 and the Renesas VSP1 video processing engines.

* 'topic/vsp1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Add DT support
  [media] v4l: vsp1: Add DT bindings documentation
  [media] v4l: vsp1: Add BRU support
  [media] v4l: vsp1: Support multi-input entities
  [media] v4l: vsp1: uds: Enable scaling of alpha layer
  [media] v4l: vsp1: Remove unexisting rt clocks

* 'topic/adv76xx' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (21 commits)
  [media] adv7604: Add LLC polarity configuration
  [media] adv7604: Set HPD GPIO direction to output
  [media] adv7604: Add endpoint properties to DT bindings
  [media] adv7604: Add DT support
  [media] adv7604: Specify the default input through platform data
  [media] adv7604: Support hot-plug detect control through a GPIO
  [media] adv7604: Sort headers alphabetically
  [media] adv7604: Replace *_and_or() functions with *_clr_set()
  [media] adv7604: Store I2C addresses and clients in arrays
  [media] adv7604: Inline the to_sd function
  [media] v4l: subdev: Remove deprecated video-level DV timings operations
  [media] adv7604: Remove deprecated video-level DV timings operations
  [media] adv7604: Add pad-level DV timings support
  [media] adv7604: Make output format configurable through pad format operations
  [media] adv7604: Add sink pads
  [media] adv7604: Remove subdev control handlers
  [media] adv7604: Add adv7611 support
  [media] adv7604: Cache register contents when reading multiple bits
  [media] adv7604: Add 16-bit read functions for CP and HDMI
  [media] adv7604: Don't put info string arrays on the stack
  ...

Documentation/devicetree/bindings/media/i2c/adv7604.txt

@@ -0,0 +1,70 @@
+* Analog Devices ADV7604/11 video decoder with HDMI receiver
+
+The ADV7604 and ADV7611 are multiformat video decoders with an integrated HDMI
+receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input,
+and the ADV7611 has one HDMI input and no analog input.
+
+These device tree bindings support the ADV7611 only at the moment.
+
+Required Properties:
+
+  - compatible: Must contain one of the following
+    - "adi,adv7611" for the ADV7611
+
+  - reg: I2C slave address
+
+  - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
+    detection pins, one per HDMI input. The active flag indicates the GPIO
+    level that enables hot-plug detection.
+
+The device node must contain one 'port' child node per device input and output
+port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows.
+
+  Port			ADV7611
+------------------------------------------------------------
+  HDMI			0
+  Digital output	1
+
+The digital output port node must contain at least one endpoint.
+
+Optional Properties:
+
+  - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+
+Optional Endpoint Properties:
+
+  The following three properties are defined in video-interfaces.txt and are
+  valid for source endpoints only.
+
+  - hsync-active: Horizontal synchronization polarity. Defaults to active low.
+  - vsync-active: Vertical synchronization polarity. Defaults to active low.
+  - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge.
+
+  If none of hsync-active, vsync-active and pclk-sample is specified the
+  endpoint will use embedded BT.656 synchronization.
+
+
+Example:
+
+	hdmi_receiver@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+
+		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
+		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+		port@1 {
+			reg = <1>;
+			hdmi_in: endpoint {
+				remote-endpoint = <&ccdc_in>;
+			};
+		};
+	};

Documentation/devicetree/bindings/media/renesas,vsp1.txt

@@ -0,0 +1,43 @@
+* Renesas VSP1 Video Processing Engine
+
+The VSP1 is a video processing engine that supports up-/down-scaling, alpha
+blending, color space conversion and various other image processing features.
+It can be found in the Renesas R-Car second generation SoCs.
+
+Required properties:
+
+  - compatible: Must contain "renesas,vsp1"
+
+  - reg: Base address and length of the registers block for the VSP1.
+  - interrupts: VSP1 interrupt specifier.
+  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
+
+  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
+  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
+  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
+
+
+Optional properties:
+
+  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
+    available.
+  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
+    available.
+  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
+    module is available.
+
+
+Example: R8A7790 (R-Car H2) VSP1-S node
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};