Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits)
  of/flattree: forward declare struct device_node in of_fdt.h
  ipmi: explicitly include of_address.h and of_irq.h
  sparc: explicitly cast negative phandle checks to s32
  powerpc/405: Fix missing #{address,size}-cells in i2c node
  powerpc/5200: dts: refactor dts files
  powerpc/5200: dts: Change combatible strings on localbus
  powerpc/5200: dts: remove unused properties
  powerpc/5200: dts: rename nodes to prepare for refactoring dts files
  of/flattree: Update dtc to current mainline.
  of/device: Don't register disabled devices
  powerpc/dts: fix syntax bugs in bluestone.dts
  of: Fixes for OF probing on little endian systems
  of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF
  of/flattree: Add of_flat_dt_match() helper function
  of_serial: explicitly include of_irq.h
  of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree
  of/flattree: Reorder unflatten_dt_node
  of/flattree: Refactor unflatten_dt_node
  of/flattree: Add non-boottime device tree functions
  of/flattree: Add Kconfig for EARLY_FLATTREE
  ...

Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.

Documentation/kbuild/makefiles.txt

@@ -1136,6 +1136,21 @@ When kbuild executes, the following steps are followed (roughly):
 	      resulting in the target file being recompiled for no
 	      obvious reason.
 
+    dtc
+	Create flattend device tree blob object suitable for linking
+	into vmlinux. Device tree blobs linked into vmlinux are placed
+	in an init section in the image. Platform code *must* copy the
+	blob to non-init memory prior to calling unflatten_device_tree().
+
+	Example:
+		#arch/x86/platform/ce4100/Makefile
+		clean-files := *dtb.S
+
+		DTC_FLAGS := -p 1024
+		obj-y += foo.dtb.o
+
+		$(obj)/%.dtb: $(src)/%.dts
+			$(call cmd,dtc)
 
 --- 6.7 Custom kbuild commands
 

Documentation/powerpc/dts-bindings/eeprom.txt

@@ -0,0 +1,28 @@
+EEPROMs (I2C)
+
+Required properties:
+
+  - compatible : should be "<manufacturer>,<type>"
+		 If there is no specific driver for <manufacturer>, a generic
+		 driver based on <type> is selected. Possible types are:
+		 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64,
+		 24c128, 24c256, 24c512, 24c1024, spd
+
+  - reg : the I2C address of the EEPROM
+
+Optional properties:
+
+  - pagesize : the length of the pagesize for writing. Please consult the
+               manual of your device, that value varies a lot. A wrong value
+	       may result in data loss! If not specified, a safety value of
+	       '1' is used which will be very slow.
+
+  - read-only: this parameterless property disables writes to the eeprom
+
+Example:
+
+eeprom@52 {
+	compatible = "atmel,24c32";
+	reg = <0x52>;
+	pagesize = <32>;
+};

arch/microblaze/Kconfig

@@ -14,7 +14,7 @@ config MICROBLAZE
 	select HAVE_DMA_API_DEBUG
 	select TRACING_SUPPORT
 	select OF
-	select OF_FLATTREE
+	select OF_EARLY_FLATTREE
 
 config SWAP
 	def_bool n

arch/microblaze/boot/Makefile

@@ -10,9 +10,6 @@ targets := linux.bin linux.bin.gz simpleImage.%
 
 OBJCOPYFLAGS := -O binary
 
-# Where the DTS files live
-dtstree         := $(srctree)/$(src)/dts
-
 # Ensure system.dtb exists
 $(obj)/linked_dtb.o: $(obj)/system.dtb
 
@@ -51,14 +48,11 @@ $(obj)/simpleImage.%: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
-# Rule to build device tree blobs
-DTC = $(objtree)/scripts/dtc/dtc
 
 # Rule to build device tree blobs
-quiet_cmd_dtc = DTC     $@
-	cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
+DTC_FLAGS := -p 1024
 
-$(obj)/%.dtb: $(dtstree)/%.dts FORCE
-	$(call if_changed,dtc)
+$(obj)/%.dtb: $(src)/dts/%.dts FORCE
+	$(call cmd,dtc)
 
 clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub

arch/microblaze/include/asm/prom.h

@@ -64,9 +64,6 @@ extern void kdump_move_device_tree(void);
 /* CPU OF node matching */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 
-/* Get the MAC address */
-extern const void *of_get_mac_address(struct device_node *np);
-
 /**
  * of_irq_map_pci - Resolve the interrupt for a PCI device
  * @pdev:	the device whose interrupt is to be resolved

arch/microblaze/kernel/prom_parse.c

@@ -110,41 +110,3 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 	cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
 	*size = of_read_number(dma_window, cells);
 }
-
-/**
- * Search the device tree for the best MAC address to use.  'mac-address' is
- * checked first, because that is supposed to contain to "most recent" MAC
- * address. If that isn't set, then 'local-mac-address' is checked next,
- * because that is the default address.  If that isn't set, then the obsolete
- * 'address' is checked, just in case we're using an old device tree.
- *
- * Note that the 'address' property is supposed to contain a virtual address of
- * the register set, but some DTS files have redefined that property to be the
- * MAC address.
- *
- * All-zero MAC addresses are rejected, because those could be properties that
- * exist in the device tree, but were not set by U-Boot.  For example, the
- * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
- * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
- * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
- * but is all zeros.
-*/
-const void *of_get_mac_address(struct device_node *np)
-{
-	struct property *pp;
-
-	pp = of_find_property(np, "mac-address", NULL);
-	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
-		return pp->value;
-
-	pp = of_find_property(np, "local-mac-address", NULL);
-	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
-		return pp->value;
-
-	pp = of_find_property(np, "address", NULL);
-	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
-		return pp->value;
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_get_mac_address);

arch/mips/Kconfig

@@ -2218,7 +2218,7 @@ config SECCOMP
 config USE_OF
 	bool "Flattened Device Tree support"
 	select OF
-	select OF_FLATTREE
+	select OF_EARLY_FLATTREE
 	help
 	  Include support for flattened device tree machine descriptions.
 

arch/powerpc/Kconfig

@@ -116,7 +116,7 @@ config PPC
 	bool
 	default y
 	select OF
-	select OF_FLATTREE
+	select OF_EARLY_FLATTREE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER

arch/powerpc/boot/Makefile

@@ -35,7 +35,7 @@ endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
 
-DTS_FLAGS	?= -p 1024
+DTC_FLAGS	?= -p 1024
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
@@ -332,10 +332,8 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
 
 # Rule to build device tree blobs
-DTC = $(objtree)/scripts/dtc/dtc
-
-$(obj)/%.dtb: $(dtstree)/%.dts
-	$(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+$(obj)/%.dtb: $(src)/dts/%.dts
+	$(call cmd,dtc)
 
 # If there isn't a platform selected then just strip the vmlinux.
 ifeq (,$(image-y))

arch/powerpc/boot/dts/bluestone.dts

@@ -33,7 +33,7 @@
 	aliases {
 		ethernet0 = &EMAC0;
 		serial0 = &UART0;
-		serial1 = &UART1;
+		//serial1 = &UART1; --gcl missing UART1 label
 	};
 
 	cpus {
@@ -52,7 +52,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
+			//next-level-cache = <&L2C0>; --gcl missing L2C0 label
 		};
 	};
 
@@ -142,7 +142,7 @@
 					/*RXEOB*/ 0x7 0x4
 					/*SERR*/  0x3 0x4
 					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
@@ -182,7 +182,7 @@
 						reg = <0x001a0000 0x00060000>;
 					};
 				};
-			}
+			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";