Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist
  HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage
  HID: add missing RX, RZ and RY enum values to hid-debug output
  HID: hid/hid-input.c doesn't need to include linux/usb/input.h
  HID: compilation fix when DEBUG_DATA is defined
  HID: proper LED-mapping for SpaceNavigator
  HID: update MAINTAINERS entry for USB-HID
  HID: GEYSER4_ISO needs quirk
  HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT

MAINTAINERS

@@ -3334,9 +3334,8 @@ W:	http://www.linux-usb.org/gadget
 S:	Maintained
 
 USB HID/HIDBP DRIVERS
-P:	Vojtech Pavlik
-M:	vojtech@suse.cz
-L:	linux-usb-users@lists.sourceforge.net
+P:	Jiri Kosina
+M:	jkosina@suse.cz
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 

drivers/hid/hid-core.c

@@ -880,6 +880,10 @@ static void hid_output_field(struct hid_field *field, __u8 *data)
 	unsigned size = field->report_size;
 	unsigned n;
 
+	/* make sure the unused bits in the last byte are zeros */
+	if (count > 0 && size > 0)
+		data[(count*size-1)/8] = 0;
+
 	for (n = 0; n < count; n++) {
 		if (field->logical_minimum < 0)	/* signed values */
 			implement(data, offset + n * size, size, s32ton(field->value[n], size));
@@ -947,7 +951,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
 	}
 
 #ifdef DEBUG_DATA
-	printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un");
+	printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
 #endif
 
 	n = 0;                          /* Normally report number is 0 */

drivers/hid/hid-input.c

@@ -30,7 +30,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
-#include <linux/usb/input.h>
 
 #undef DEBUG
 
@@ -364,9 +363,22 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			break;
 
 		case HID_UP_LED:
-			if (((usage->hid - 1) & 0xffff) >= LED_MAX)
-				goto ignore;
-			map_led((usage->hid - 1) & 0xffff);
+
+			switch (usage->hid & 0xffff) {                        /* HID-Value:                   */
+				case 0x01:  map_led (LED_NUML);     break;    /*   "Num Lock"                 */
+				case 0x02:  map_led (LED_CAPSL);    break;    /*   "Caps Lock"                */
+				case 0x03:  map_led (LED_SCROLLL);  break;    /*   "Scroll Lock"              */
+				case 0x04:  map_led (LED_COMPOSE);  break;    /*   "Compose"                  */
+				case 0x05:  map_led (LED_KANA);     break;    /*   "Kana"                     */
+				case 0x27:  map_led (LED_SLEEP);    break;    /*   "Stand-By"                 */
+				case 0x4c:  map_led (LED_SUSPEND);  break;    /*   "System Suspend"           */
+				case 0x09:  map_led (LED_MUTE);     break;    /*   "Mute"                     */
+				case 0x4b:  map_led (LED_MISC);     break;    /*   "Generic Indicator"        */
+				case 0x19:  map_led (LED_MAIL);     break;    /*   "Message Waiting"          */
+				case 0x4d:  map_led (LED_CHARGING); break;    /*   "External Power Connected" */
+
+				default: goto ignore;
+			}
 			break;
 
 		case HID_UP_DIGITIZER:

drivers/usb/input/Kconfig

@@ -7,7 +7,7 @@ comment "USB Input Devices"
 config USB_HID
 	tristate "USB Human Interface Device (full HID) support"
 	default y
-	depends on USB
+	depends on USB && INPUT
 	select HID
 	---help---
 	  Say Y here if you want full HID support to connect USB keyboards,

drivers/usb/input/hid-core.c

@@ -106,18 +106,18 @@ static void hid_reset(struct work_struct *work)
 
 	if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
 		dev_dbg(&usbhid->intf->dev, "clear halt\n");
-		rc = usb_clear_halt(to_usb_device(hid->dev), usbhid->urbin->pipe);
+		rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
 		clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
 		hid_start_in(hid);
 	}
 
 	else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
 		dev_dbg(&usbhid->intf->dev, "resetting device\n");
-		rc = rc_lock = usb_lock_device_for_reset(to_usb_device(hid->dev), usbhid->intf);
+		rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
 		if (rc_lock >= 0) {
-			rc = usb_reset_composite_device(to_usb_device(hid->dev), usbhid->intf);
+			rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
 			if (rc_lock)
-				usb_unlock_device(to_usb_device(hid->dev));
+				usb_unlock_device(hid_to_usb_dev(hid));
 		}
 		clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	}
@@ -129,8 +129,8 @@ static void hid_reset(struct work_struct *work)
 		break;
 	default:
 		err("can't reset device, %s-%s/input%d, status %d",
-				to_usb_device(hid->dev)->bus->bus_name,
-				to_usb_device(hid->dev)->devpath,
+				hid_to_usb_dev(hid)->bus->bus_name,
+				hid_to_usb_dev(hid)->devpath,
 				usbhid->ifnum, rc);
 		/* FALLTHROUGH */
 	case -EHOSTUNREACH:
@@ -217,8 +217,8 @@ static void hid_irq_in(struct urb *urb)
 		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 		if (status != -EPERM) {
 			err("can't resubmit intr, %s-%s/input%d, status %d",
-					to_usb_device(hid->dev)->bus->bus_name,
-					to_usb_device(hid->dev)->devpath,
+					hid_to_usb_dev(hid)->bus->bus_name,
+					hid_to_usb_dev(hid)->devpath,
 					usbhid->ifnum, status);
 			hid_io_error(hid);
 		}
@@ -251,7 +251,7 @@ static int hid_submit_out(struct hid_device *hid)
 
 	hid_output_report(report, usbhid->outbuf);
 	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	usbhid->urbout->dev = to_usb_device(hid->dev);
+	usbhid->urbout->dev = hid_to_usb_dev(hid);
 
 	dbg("submitting out urb");
 
@@ -276,13 +276,13 @@ static int hid_submit_ctrl(struct hid_device *hid)
 	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
 	if (dir == USB_DIR_OUT) {
 		hid_output_report(report, usbhid->ctrlbuf);
-		usbhid->urbctrl->pipe = usb_sndctrlpipe(to_usb_device(hid->dev), 0);
+		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
 		usbhid->urbctrl->transfer_buffer_length = len;
 	} else {
 		int maxpacket, padlen;
 
-		usbhid->urbctrl->pipe = usb_rcvctrlpipe(to_usb_device(hid->dev), 0);
-		maxpacket = usb_maxpacket(to_usb_device(hid->dev), usbhid->urbctrl->pipe, 0);
+		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
+		maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
 		if (maxpacket > 0) {
 			padlen = (len + maxpacket - 1) / maxpacket;
 			padlen *= maxpacket;
@@ -292,7 +292,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
 			padlen = 0;
 		usbhid->urbctrl->transfer_buffer_length = padlen;
 	}
-	usbhid->urbctrl->dev = to_usb_device(hid->dev);
+	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
 
 	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
 	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
@@ -582,6 +582,8 @@ void usbhid_init_reports(struct hid_device *hid)
 }
 
 #define USB_VENDOR_ID_GTCO		0x078c
+#define USB_VENDOR_ID_GTCO_IPANEL_1	0x08ca
+#define USB_VENDOR_ID_GTCO_IPANEL_2     0x5543
 #define USB_DEVICE_ID_GTCO_90		0x0090
 #define USB_DEVICE_ID_GTCO_100		0x0100
 #define USB_DEVICE_ID_GTCO_101		0x0101
@@ -627,6 +629,9 @@ void usbhid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_GTCO_1004		0x1004
 #define USB_DEVICE_ID_GTCO_1005		0x1005
 #define USB_DEVICE_ID_GTCO_1006		0x1006
+#define USB_DEVICE_ID_GTCO_10		0x0010
+#define USB_DEVICE_ID_GTCO_8		0x0008
+#define USB_DEVICE_ID_GTCO_d            0x000d
 
 #define USB_VENDOR_ID_WACOM		0x056a
 
@@ -875,6 +880,9 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_1, USB_DEVICE_ID_GTCO_10, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
@@ -951,7 +959,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
@@ -1187,7 +1195,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 
 	hid->version = le16_to_cpu(hdesc->bcdHID);
 	hid->country = hdesc->bCountryCode;
-	hid->dev = &dev->dev;
+	hid->dev = &intf->dev;
 	usbhid->intf = intf;
 	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
@@ -1282,7 +1290,7 @@ static void hid_disconnect(struct usb_interface *intf)
 	usb_free_urb(usbhid->urbctrl);
 	usb_free_urb(usbhid->urbout);
 
-	hid_free_buffers(to_usb_device(hid->dev), hid);
+	hid_free_buffers(hid_to_usb_dev(hid), hid);
 	hid_free_device(hid);
 }
 

drivers/usb/input/hid-ff.c

@@ -33,6 +33,7 @@
 #include <linux/usb.h>
 
 #include <linux/hid.h>
+#include "usbhid.h"
 
 /*
  * This table contains pointers to initializers. To add support for new
@@ -70,8 +71,8 @@ static struct hid_ff_initializer inits[] = {
 int hid_ff_init(struct hid_device* hid)
 {
 	struct hid_ff_initializer *init;
-	int vendor = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idVendor);
-	int product = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idProduct);
+	int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
+	int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
 
 	for (init = inits; init->idVendor; init++)
 		if (init->idVendor == vendor && init->idProduct == product)

drivers/usb/input/hiddev.c

@@ -384,7 +384,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	struct hiddev_list *list = file->private_data;
 	struct hiddev *hiddev = list->hiddev;
 	struct hid_device *hid = hiddev->hid;
-	struct usb_device *dev = to_usb_device(hid->dev);
+	struct usb_device *dev = hid_to_usb_dev(hid);
 	struct hiddev_collection_info cinfo;
 	struct hiddev_report_info rinfo;
 	struct hiddev_field_info finfo;

drivers/usb/input/usbhid.h

@@ -80,5 +80,8 @@ struct usbhid_device {
 
 };
 
+#define	hid_to_usb_dev(hid_dev) \
+	container_of(hid_dev->dev->parent, struct usb_device, dev)
+
 #endif
 

include/linux/hid-debug.h

@@ -700,9 +700,10 @@ static char *keys[KEY_MAX + 1] = {
 
 static char *relatives[REL_MAX + 1] = {
 	[REL_X] = "X",			[REL_Y] = "Y",
-	[REL_Z] = "Z",			[REL_HWHEEL] = "HWheel",
-	[REL_DIAL] = "Dial",		[REL_WHEEL] = "Wheel",
-	[REL_MISC] = "Misc",
+	[REL_Z] = "Z",			[REL_RX] = "Rx",
+	[REL_RY] = "Ry",		[REL_RZ] = "Rz",
+	[REL_HWHEEL] = "HWheel",	[REL_DIAL] = "Dial",
+	[REL_WHEEL] = "Wheel",		[REL_MISC] = "Misc",
 };
 
 static char *absolutes[ABS_MAX + 1] = {