mfd: kempld-core: Add support for additional devices

This update includes DMI IDs for the following Kontron modules and
systems:
COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203

Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
kempld devices.

Instead of also adding the newly supported devices to the Kconfig
description this patch removes the lengthy list. With future usage of
the ACPI HIDs it will not be necessary to explicitly add support for
each individual device to the driver and therefore the list would
become incomplete anyway.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -730,33 +730,9 @@ config MFD_KEMPLD
 	select MFD_CORE
 	help
 	  This is the core driver for the PLD (Programmable Logic Device) found
-	  on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
-	  device may provide functions like watchdog, GPIO, UART and I2C bus.
-
-	  The following modules are supported:
-		* COMe-bBD#
-		* COMe-bBL6
-		* COMe-bHL6
-		* COMe-bSL6
-		* COMe-bIP#
-		* COMe-bKL6
-		* COMe-bPC2 (ETXexpress-PC)
-		* COMe-bSC# (ETXexpress-SC T#)
-		* COMe-cAL6
-		* COMe-cBL6
-		* COMe-cBT6
-		* COMe-cBW6
-		* COMe-cCT6
-		* COMe-cDC2 (microETXexpress-DC)
-		* COMe-cHL6
-		* COMe-cKL6
-		* COMe-cPC2 (microETXexpress-PC)
-		* COMe-cSL6
-		* COMe-mAL10
-		* COMe-mBT10
-		* COMe-mCT10
-		* COMe-mTT10 (nanoETXexpress-TT)
-		* ETX-OH
+	  on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as
+	  well as on some other Kontron products. The PLD device may provide
+	  functions like watchdog, GPIO, UART and I2C bus.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called kempld-core.

drivers/mfd/kempld-core.c

@@ -552,6 +552,7 @@ static int kempld_remove(struct platform_device *pdev)
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id kempld_acpi_table[] = {
+	{ "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
 	{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
 	{}
 };
@@ -584,6 +585,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "BDV7",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	}, {
 		.ident = "BHL6",
 		.matches = {
@@ -648,6 +657,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "CDV7",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	}, {
 		.ident = "CHL6",
 		.matches = {
@@ -767,6 +784,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "A203",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "M4A1",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	}, {
 		.ident = "MAL1",
 		.matches = {
@@ -775,6 +808,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "MAPL",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	}, {
 		.ident = "MBR1",
 		.matches = {
@@ -823,6 +864,30 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "PAPL",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "SXAL",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "SXAL4",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	}, {
 		.ident = "UNP1",
 		.matches = {
@@ -863,15 +928,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
-	},
-	{
+	}, {
 		.ident = "UTH6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
 			DMI_MATCH(DMI_BOARD_NAME, "COMe-cTH6"),
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "Q7AL",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
 	},
 	{}
 };