ARM: omap1: remove unused board files

All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -15263,7 +15263,6 @@ Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 F:	arch/arm/configs/omap1_defconfig
 F:	arch/arm/mach-omap1/
-F:	arch/arm/plat-omap/
 F:	drivers/i2c/busses/i2c-omap.c
 F:	include/linux/platform_data/ams-delta-fiq.h
 F:	include/linux/platform_data/i2c-omap.h
@@ -15278,7 +15277,6 @@ Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 F:	arch/arm/configs/omap2plus_defconfig
 F:	arch/arm/mach-omap2/
-F:	arch/arm/plat-omap/
 F:	drivers/bus/ti-sysc.c
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c

arch/arm/Kconfig.debug

@@ -760,30 +760,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -1728,9 +1704,9 @@ config DEBUG_UART_PHYS
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
@@ -1847,9 +1823,9 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \

arch/arm/configs/omap1_defconfig

@@ -20,8 +20,6 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP1=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP730=y
-CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_RESET_CLOCKS=y

arch/arm/mach-omap1/Kconfig

@@ -19,19 +19,6 @@ menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
 
-config ARCH_OMAP730
-	depends on ARCH_MULTI_V5
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-	select OMAP_MPU_TIMER
-
-config ARCH_OMAP850
-	depends on ARCH_MULTI_V5
-	bool "OMAP850 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-
 config ARCH_OMAP15XX
 	depends on ARCH_MULTI_V4T
 	default y
@@ -126,37 +113,6 @@ config ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
 
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_HERALD
-	bool "HTC Herald"
-	depends on ARCH_OMAP850
-	depends on UNUSED_BOARD_FILES
-	help
-	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
-
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
@@ -167,28 +123,11 @@ config MACH_OMAP_OSK
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
-	depends on UNUSED_BOARD_FILES
 	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
 	  and camera connector.  Say Y here if you have this board.
 
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_FSAMPLE
-	bool "TI F-Sample"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
-	  a board.
-
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP15XX
@@ -198,26 +137,6 @@ config MACH_OMAP_PALMTE
 	  http://palmtelinux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
-config MACH_OMAP_PALMZ71
-	bool "Palm Zire71"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
-
-config MACH_OMAP_PALMTT
-	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
-	  need a PalmOS compatible bootloader (Garux); check out
-	  http://garux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
 config MACH_SX1
 	bool "Siemens SX1"
 	depends on ARCH_OMAP15XX
@@ -249,16 +168,6 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
 endmenu
 
 endif

arch/arm/mach-omap1/Makefile

@@ -29,31 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
-					   board-nand.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
-					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
-obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
-obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
 					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
-obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
-
-ifeq ($(CONFIG_ARCH_OMAP15XX),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
-endif
 
 # GPIO
-obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o