spi: get rid of some legacy macros

Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:

This series finishes off the removal of some of the legacy names for
SPI controllers and devices.

CREDITS

@@ -2161,6 +2161,19 @@ N: Mike Kravetz
 E: mike.kravetz@oracle.com
 D: Maintenance and development of the hugetlb subsystem
 
+N: Seth Jennings
+E: sjenning@redhat.com
+D: Creation and maintenance of zswap
+
+N: Dan Streetman
+E: ddstreet@ieee.org
+D: Maintenance and development of zswap
+D: Creation and maintenance of the zpool API
+
+N: Vitaly Wool
+E: vitaly.wool@konsulko.com
+D: Maintenance and development of zswap
+
 N: Andreas S. Krebs
 E: akrebs@altavista.net
 D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards

Documentation/ABI/testing/sysfs-class-net-queues

@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,31 +8,31 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
 Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
 Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,15 +62,15 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org

Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon

@@ -1,12 +1,12 @@
-What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
 Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -20,15 +20,15 @@ Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
 Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -37,7 +37,7 @@ Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -50,7 +50,7 @@ Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -63,7 +63,7 @@ Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org

Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon

@@ -1,4 +1,4 @@
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -12,15 +12,15 @@ Description:	RW. Card reactive sustained  (PL1) power limit in microwatts.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
 Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -33,7 +33,7 @@ Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -44,23 +44,23 @@ Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 		the operating frequency if the power averaged over a window
 		exceeds this limit.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
 Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
 Description:	RO. Energy input of device in microjoules.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
 Date:		October 2023
 KernelVersion:	6.6
 Contact:	intel-xe@lists.freedesktop.org

Documentation/ABI/testing/sysfs-platform-silicom

@@ -10,6 +10,7 @@ What:		/sys/devices/platform/silicom-platform/power_cycle
 Date:		November 2023
 KernelVersion:	6.7
 Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
 		This file allow user to power cycle the platform.
 		Default value is 0; when set to 1, it powers down
 		the platform, waits 5 seconds, then powers on the

Documentation/accel/introduction.rst

@@ -101,8 +101,8 @@ External References
 email threads
 -------------
 
-* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
-* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
 
 Conference talks
 ----------------

Documentation/admin-guide/kernel-parameters.rst

@@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
 
 .. include:: kernel-parameters.txt
    :literal:
-
-Todo
-----
-
-	Add more DRM drivers.

Documentation/admin-guide/kernel-per-CPU-kthreads.rst

@@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
 3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 
-	a.	Build your kernel with CONFIG_SLUB=y rather than
-		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
-		use of each CPU's workqueues to run its cache_reap()
-		function.
-	b.	Avoid using oprofile, thus avoiding OS jitter from
+	a.	Avoid using oprofile, thus avoiding OS jitter from
 		wq_sync_buffer().
-	c.	Limit your CPU frequency so that a CPU-frequency
+	b.	Limit your CPU frequency so that a CPU-frequency
 		governor is not required, possibly enlisting the aid of
 		special heatsinks or other cooling technologies.  If done
 		correctly, and if you CPU architecture permits, you should
@@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
 
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	d.	As of v3.18, Christoph Lameter's on-demand vmstat workers
+	c.	As of v3.18, Christoph Lameter's on-demand vmstat workers
 		commit prevents OS jitter due to vmstat_update() on
 		CONFIG_SMP=y systems.  Before v3.18, is not possible
 		to entirely get rid of the OS jitter, but you can
@@ -274,20 +270,20 @@ To reduce its OS jitter, do any of the following:
 		(based on an earlier one from Gilad Ben-Yossef) that
 		reduces or even eliminates vmstat overhead for some
 		workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
-	e.	If running on high-end powerpc servers, build with
+	d.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
 		(This will require editing Kconfig files and will defeat
 		this platform's RAS functionality.)  This avoids jitter
 		due to the rtas_event_scan() function.
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	f.	If running on Cell Processor, build your kernel with
+	e.	If running on Cell Processor, build your kernel with
 		CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
 		spu_gov_work().
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	g.	If running on PowerMAC, build your kernel with
+	f.	If running on PowerMAC, build your kernel with
 		CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
 		avoiding OS jitter from rackmeter_do_timer().
 

Documentation/dev-tools/kunit/usage.rst

@@ -671,8 +671,23 @@ Testing Static Functions
 ------------------------
 
 If we do not want to expose functions or variables for testing, one option is to
-conditionally ``#include`` the test file at the end of your .c file. For
-example:
+conditionally export the used symbol. For example:
+
+.. code-block:: c
+
+	/* In my_file.c */
+
+	VISIBLE_IF_KUNIT int do_interesting_thing();
+	EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
+
+	/* In my_file.h */
+
+	#if IS_ENABLED(CONFIG_KUNIT)
+		int do_interesting_thing(void);
+	#endif
+
+Alternatively, you could conditionally ``#include`` the test file at the end of
+your .c file. For example:
 
 .. code-block:: c
 

Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml

@@ -85,7 +85,7 @@ allOf:
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@ allOf:
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@ allOf:
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 

Documentation/devicetree/bindings/media/cnm,wave521c.yaml

@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - ti,k3-j721s2-wave521c
+          - ti,j721s2-wave521c
       - const: cnm,wave521c
 
   reg:
@@ -53,7 +53,7 @@ additionalProperties: false
 examples:
   - |
     vpu: video-codec@12345678 {
-        compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c";
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
         reg = <0x12345678 0x1000>;
         clocks = <&clks 42>;
         interrupts = <42>;