Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Mostly bugfixes and a few small code removals.  Worth pointing out is:

   - A handful of more fixes to get DT enablement working properly on
     OMAP, finding new breakage of things that don't work quite right
     yet without the traditional board files.  I expect a bit more of
     this to come in this release as people test on their hardware.
   - Implementation of power_down_finish() on vexpress, to make kexec
     work and to stop the MCPM core to produce a warning (the warning
     was new to 3.13-rc1).
   - A handful of minor fixes for various platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm2835: add missing #xxx-cells to I2C nodes
  ARM: dts: Add max77686 RTC interrupt to cros5250-common
  ARM: vexpress/TC2: Implement MCPM power_down_finish()
  ARM: tegra: Provide dummy powergate implementation
  ARM: omap: fix warning with LPAE build
  ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init
  ARM: OMAP2+: Remove legacy mux code for display.c
  ARM: OMAP2+: Fix undefined reference to set_cntfreq
  gpio: twl4030: Fix passing of pdata in the device tree case
  gpio: twl4030: Fix regression for twl gpio output
  ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
  ARM: dts: imx6qdl: disable spdif "rxtx5" clock option
  ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
  ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
  i2c: omap: Fix missing device tree flags for omap2

Documentation/devicetree/bindings/i2c/i2c-omap.txt

@@ -1,7 +1,8 @@
 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;

arch/arm/boot/dts/bcm2835.dtsi

@@ -85,6 +85,8 @@
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/cros5250-common.dtsi

@@ -27,6 +27,13 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -161,7 +161,7 @@
 					clocks = <&clks 197>, <&clks 3>,
 						 <&clks 197>, <&clks 107>,
 						 <&clks 0>,   <&clks 118>,
-						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>,  <&clks 139>,
 						 <&clks 0>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/omap-zoom-common.dtsi

@@ -13,7 +13,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	8250@3,0 {
+	uart@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 0x100>;
 		bank-width = <2>;

arch/arm/boot/dts/omap2.dtsi

@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
 #include "skeleton.dtsi"
@@ -21,6 +22,8 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
 	};
 
 	cpus {
@@ -53,6 +56,28 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -63,6 +88,7 @@
 
 		sdma: dma-controller@48056000 {
 			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
 			reg = <0x48056000 0x1000>;
 			interrupts = <12>,
 				     <13>,
@@ -73,21 +99,91 @@
 			#dma-requests = <64>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <36>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@4806e000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 

arch/arm/boot/dts/omap2420.dtsi

@@ -114,12 +114,35 @@
 			dma-names = "tx", "rx";
 		};
 
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
 			interrupts = <37>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};

arch/arm/boot/dts/omap2430.dtsi

@@ -175,12 +175,61 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
 			interrupts = <37>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};

arch/arm/mach-omap2/Makefile

@@ -19,11 +19,11 @@ secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)	 += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o

arch/arm/mach-omap2/common.h

@@ -299,7 +299,6 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 extern void omap_reserve(void);
 
 struct omap_hwmod;