Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

All of the conflicts were cases of overlapping changes.

In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/PCI/pci.txt

@@ -570,7 +570,9 @@ your driver if they're helpful, or just use plain hex constants.
 The device IDs are arbitrary hex numbers (vendor controlled) and normally used
 only in a single location, the pci_device_id table.
 
-Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/.
+Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/.
+There are mirrors of the pci.ids file at http://pciids.sourceforge.net/
+and https://github.com/pciutils/pciids.
 
 
 

Documentation/devicetree/bindings/eeprom/at24.txt

@@ -38,9 +38,9 @@ Required properties:
 
                 "catalyst",
                 "microchip",
+                "nxp",
                 "ramtron",
                 "renesas",
-                "nxp",
                 "st",
 
                 Some vendors use different model names for chips which are just

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

@@ -14,6 +14,7 @@ Required properties:
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
     - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77965" (R-Car M3-N)
     - "renesas,intc-ex-r8a77970" (R-Car V3M)
     - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
       - "renesas,etheravb-rcar-gen3" as a fallback for the above
 		R-Car Gen3 devices.

Documentation/devicetree/bindings/power/wakeup-source.txt

@@ -60,7 +60,7 @@ Examples
 		#size-cells = <0>;
 
 		button@1 {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <116>;
 			label = "POWER";

Documentation/devicetree/bindings/thermal/imx-thermal.txt

@@ -22,7 +22,32 @@ Optional properties:
 - clocks : thermal sensor's clock source.
 
 Example:
+ocotp: ocotp@21bc000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,imx6sx-ocotp", "syscon";
+	reg = <0x021bc000 0x4000>;
+	clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+	tempmon_calib: calib@38 {
+		reg = <0x38 4>;
+	};
+
+	tempmon_temp_grade: temp-grade@20 {
+		reg = <0x20 4>;
+	};
+};
+
+tempmon: tempmon {
+	compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,tempmon = <&anatop>;
+	nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+	nvmem-cell-names = "calib", "temp_grade";
+	clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+};
+
+Legacy method (Deprecated):
 tempmon {
 	compatible = "fsl,imx6q-tempmon";
 	fsl,tempmon = <&anatop>;

Documentation/ia64/serial.txt

@@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 	- If you don't have an HCDP, the kernel doesn't know where
 	  your console lives until the driver discovers serial
-	  devices.  Use "console=uart, io,0x3f8" (or appropriate
+	  devices.  Use "console=uart,io,0x3f8" (or appropriate
 	  address for your machine).
 
     Kernel and init script output works fine, but no "login:" prompt:

Documentation/media/dmx.h.rst.exceptions

@@ -50,9 +50,15 @@ replace typedef dmx_filter_t :c:type:`dmx_filter`
 replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
 replace typedef dmx_input_t :c:type:`dmx_input`
 
-ignore symbol DMX_OUT_DECODER
-ignore symbol DMX_OUT_TAP
-ignore symbol DMX_OUT_TS_TAP
-ignore symbol DMX_OUT_TSDEMUX_TAP
+replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
+
+replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
+replace symbol DMX_OUT_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
 
 replace ioctl DMX_DQBUF dmx_qbuf

Documentation/media/uapi/dvb/dmx-qbuf.rst

@@ -51,9 +51,10 @@ out to disk. Buffers remain locked until dequeued, until the
 the device is closed.
 
 Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
-(capturing) buffer from the driver's outgoing queue. They just set the ``reserved`` field array to zero. When ``DMX_DQBUF`` is called with a
-pointer to this structure, the driver fills the remaining fields or
-returns an error code.
+(capturing) buffer from the driver's outgoing queue.
+They just set the ``index`` field withe the buffer ID to be queued.
+When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
+the driver fills the remaining fields or returns an error code.
 
 By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
 queue. When the ``O_NONBLOCK`` flag was given to the

Documentation/virtual/kvm/api.txt

@@ -123,14 +123,15 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
 flag KVM_VM_MIPS_VZ.
 
 
-4.3 KVM_GET_MSR_INDEX_LIST
+4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
 
-Capability: basic
+Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
 Architectures: x86
-Type: system
+Type: system ioctl
 Parameters: struct kvm_msr_list (in/out)
 Returns: 0 on success; -1 on error
 Errors:
+  EFAULT:    the msr index list cannot be read from or written to
   E2BIG:     the msr index list is to be to fit in the array specified by
              the user.
 
@@ -139,16 +140,23 @@ struct kvm_msr_list {
 	__u32 indices[0];
 };
 
-This ioctl returns the guest msrs that are supported.  The list varies
-by kvm version and host processor, but does not change otherwise.  The
-user fills in the size of the indices array in nmsrs, and in return
-kvm adjusts nmsrs to reflect the actual number of msrs and fills in
-the indices array with their numbers.
+The user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in the
+indices array with their numbers.
+
+KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported.  The list
+varies by kvm version and host processor, but does not change otherwise.
 
 Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
 not returned in the MSR list, as different vcpus can have a different number
 of banks, as set via the KVM_X86_SETUP_MCE ioctl.
 
+KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed
+to the KVM_GET_MSRS system ioctl.  This lets userspace probe host capabilities
+and processor features that are exposed via MSRs (e.g., VMX capabilities).
+This list also varies by kvm version and host processor, but does not change
+otherwise.
+
 
 4.4 KVM_CHECK_EXTENSION
 
@@ -475,14 +483,22 @@ Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
 
 4.18 KVM_GET_MSRS
 
-Capability: basic
+Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system)
 Architectures: x86
-Type: vcpu ioctl
+Type: system ioctl, vcpu ioctl
 Parameters: struct kvm_msrs (in/out)
-Returns: 0 on success, -1 on error
+Returns: number of msrs successfully returned;
+        -1 on error
+
+When used as a system ioctl:
+Reads the values of MSR-based features that are available for the VM.  This
+is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values.
+The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST
+in a system ioctl.
 
+When used as a vcpu ioctl:
 Reads model-specific registers from the vcpu.  Supported msr indices can
-be obtained using KVM_GET_MSR_INDEX_LIST.
+be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl.
 
 struct kvm_msrs {
 	__u32 nmsrs; /* number of msrs in entries */

Documentation/virtual/kvm/cpuid.txt

@@ -58,6 +58,10 @@ KVM_FEATURE_PV_TLB_FLUSH           ||     9 || guest checks this feature bit
                                    ||       || before enabling paravirtualized
                                    ||       || tlb flush.
 ------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF_VMEXIT        ||    10 || paravirtualized async PF VM exit
+                                   ||       || can be enabled by setting bit 2
+                                   ||       || when writing to msr 0x4b564d02
+------------------------------------------------------------------------------
 KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
                                    ||       || per-cpu warps are expected in
                                    ||       || kvmclock.

Documentation/virtual/kvm/msr.txt

@@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02
 	when asynchronous page faults are enabled on the vcpu 0 when
 	disabled. Bit 1 is 1 if asynchronous page faults can be injected
 	when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
-	are delivered to L1 as #PF vmexits.
+	are delivered to L1 as #PF vmexits.  Bit 2 can be set only if
+	KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID.
 
 	First 4 byte of 64 byte memory location will be written to by
 	the hypervisor at the time of asynchronous page fault (APF)

Documentation/x86/intel_rdt_ui.txt

@@ -671,7 +671,7 @@ occupancy of the real time threads on these cores.
 # mkdir p1
 
 Move the cpus 4-7 over to p1
-# echo f0 > p0/cpus
+# echo f0 > p1/cpus
 
 View the llc occupancy snapshot
 

Documentation/x86/topology.txt

@@ -108,7 +108,7 @@ The topology of a system is described in the units of:
 
     The number of online threads is also printed in /proc/cpuinfo "siblings."
 
-  - topology_sibling_mask():
+  - topology_sibling_cpumask():
 
     The cpumask contains all online threads in the core to which a thread
     belongs.

MAINTAINERS

@@ -1238,7 +1238,7 @@ F:	drivers/clk/at91
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
@@ -1590,7 +1590,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/dove/
@@ -1604,7 +1604,7 @@ F:	arch/arm/boot/dts/orion5x*
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1999,8 +1999,10 @@ M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
 M:	Alexandre Torgue <alexandre.torgue@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
 N:	stm32
+F:	arch/arm/boot/dts/stm32*
+F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
 
 ARM/TANGO ARCHITECTURE
@@ -7600,8 +7602,10 @@ F:	mm/kasan/
 F:	scripts/Makefile.kasan
 
 KCONFIG
+M:	Masahiro Yamada <yamada.masahiro@socionext.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 L:	linux-kbuild@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
@@ -10935,6 +10939,17 @@ L:	linux-gpio@vger.kernel.org
 S:	Supported
 F:	drivers/pinctrl/pinctrl-at91-pio4.*
 
+PIN CONTROLLER - FREESCALE
+M:	Dong Aisheng <aisheng.dong@nxp.com>
+M:	Fabio Estevam <festevam@gmail.com>
+M:	Shawn Guo <shawnguo@kernel.org>
+M:	Stefan Agner <stefan@agner.ch>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/freescale/
+F:	Documentation/devicetree/bindings/pinctrl/fsl,*
+
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Heikki Krogerus <heikki.krogerus@linux.intel.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -388,7 +388,7 @@ PYTHON		= python
 CHECK		= sparse
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-		  -Wbitwise -Wno-return-void $(CF)
+		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 NOSTDINC_FLAGS  =
 CFLAGS_MODULE   =
 AFLAGS_MODULE   =
@@ -489,6 +489,11 @@ KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 endif
 
+RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
+RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
+RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
+export RETPOLINE_CFLAGS
+
 ifeq ($(config-targets),1)
 # ===========================================================================
 # *config targets only - make sure prerequisites are updated, and descend
@@ -579,10 +584,9 @@ ifeq ($(KBUILD_EXTMOD),)
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 
-# If .config is newer than include/config/auto.conf, someone tinkered
-# with it and forgot to run make oldconfig.
-# if auto.conf.cmd is missing then we are probably in a cleaned tree so
-# we execute the config step to be sure to catch updated Kconfig files
+# The actual configuration files used during the build are stored in
+# include/generated/ and include/config/. Update them if .config is newer than
+# include/config/auto.conf (which mirrors .config).
 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
@@ -857,8 +861,7 @@ KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
 KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
-LDFLAGS_BUILD_ID := $(patsubst -Wl$(comma)%,%,\
-			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+LDFLAGS_BUILD_ID := $(call ld-option, --build-id)
 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 

arch/alpha/include/asm/cmpxchg.h

@@ -6,7 +6,6 @@
  * Atomic exchange routines.
  */
 
-#define __ASM__MB
 #define ____xchg(type, args...)		__xchg ## type ## _local(args)
 #define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
 #include <asm/xchg.h>
@@ -33,10 +32,6 @@
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
 #undef ____xchg
 #undef ____cmpxchg
 #define ____xchg(type, args...)		__xchg ##type(args)
@@ -64,7 +59,6 @@
 	cmpxchg((ptr), (o), (n));					\
 })
 
-#undef __ASM__MB
 #undef ____cmpxchg
 
 #endif /* _ALPHA_CMPXCHG_H */