Merge branch 'dt-bindings-net-dsa-microchip-convert-ksz-bindings-to-y…

…aml' Christian Eggers says: ==================== dt-bindings: net: dsa: microchip: convert KSZ bindings to yaml These patches are orginally from the series "net: dsa: microchip: PTP support for KSZ956x" As the the device tree conversion to yaml is not really related to the PTP patches and the original series is going to take more time than I expected, I would like to split this. Changes (original series -> v1) -------------------------------- - dts: moved "allOf" below "maintainers" - dts: use "unevaluatedProperties" instead of "additionalProperties" - dts: removed "spi-cpha" and "spi-cpol" flags as the hardware is fixed - ksz8795: setup SPI for mode 3 - ksz9477: dito ==================== Link: https://lore.kernel.org/r/20201120112107.16334-1-ceggers@arri.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mariux64 · Nov 26, 2020 · 0f61451 · 0f61451
2 parents 0e1f1cc + 8c4599f
commit 0f61451
Show file tree

Hide file tree

Showing 6 changed files with 164 additions and 127 deletions.
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Woojung Huh <Woojung.Huh@microchip.com>
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+  # required and optional properties.
+  compatible:
+    enum:
+      - microchip,ksz8765
+      - microchip,ksz8794
+      - microchip,ksz8795
+      - microchip,ksz9477
+      - microchip,ksz9897
+      - microchip,ksz9896
+      - microchip,ksz9567
+      - microchip,ksz8565
+      - microchip,ksz9893
+      - microchip,ksz9563
+      - microchip,ksz8563
+
+  reset-gpios:
+    description:
+      Should be a gpio specifier for a reset line.
+    maxItems: 1
+
+  microchip,synclko-125:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+    eth0 {
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-0 = <&pinctrl_spi_ksz>;
+        cs-gpios = <&pioC 25 0>;
+        id = <1>;
+
+        ksz9477: switch@0 {
+            compatible = "microchip,ksz9477";
+            reg = <0>;
+            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@4 {
+                    reg = <4>;
+                    label = "lan5";
+                };
+                port@5 {
+                    reg = <5>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+
+        ksz8565: switch@1 {
+            compatible = "microchip,ksz8565";
+            reg = <1>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@6 {
+                    reg = <6>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -11487,7 +11487,7 @@ M:	Woojung Huh <woojung.huh@microchip.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/dsa/ksz.txt
+F:	Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
 F:	drivers/net/dsa/microchip/*
 F:	include/linux/platform_data/microchip-ksz.h
 F:	net/dsa/tag_ksz.c

diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -49,6 +49,12 @@ static int ksz8795_spi_probe(struct spi_device *spi)
 	if (spi->dev.platform_data)
 		dev->pdata = spi->dev.platform_data;
 
+	/* setup spi */
+	spi->mode = SPI_MODE_3;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
 	ret = ksz8795_switch_register(dev);
 
 	/* Main DSA driver may not be started yet. */

diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -48,6 +48,12 @@ static int ksz9477_spi_probe(struct spi_device *spi)
 	if (spi->dev.platform_data)
 		dev->pdata = spi->dev.platform_data;
 
+	/* setup spi */
+	spi->mode = SPI_MODE_3;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
 	ret = ksz9477_switch_register(dev);
 
 	/* Main DSA driver may not be started yet. */

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
@@ -426,7 +426,9 @@ int ksz_switch_register(struct ksz_device *dev,
 		ret = of_get_phy_mode(dev->dev->of_node, &interface);
 		if (ret == 0)
 			dev->compat_interface = interface;
-		ports = of_get_child_by_name(dev->dev->of_node, "ports");
+		ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
+		if (!ports)
+			ports = of_get_child_by_name(dev->dev->of_node, "ports");
 		if (ports)
 			for_each_available_child_of_node(ports, port) {
 				if (of_property_read_u32(port, "reg",