wil6210: add support for device led configuration

Add the ability to configure the device led to be used for notifying
the AP activity (60G device supports leds 0-2).
The host can also configure the blinking frequency of the led in
three states.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/wil6210/debugfs.c

@@ -1441,6 +1441,118 @@ static const struct file_operations fops_sta = {
 	.llseek		= seq_lseek,
 };
 
+static ssize_t wil_read_file_led_cfg(struct file *file, char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	char buf[80];
+	int n;
+
+	n = snprintf(buf, sizeof(buf),
+		     "led_id is set to %d, echo 1 to enable, 0 to disable\n",
+		     led_id);
+
+	n = min_t(int, n, sizeof(buf));
+
+	return simple_read_from_buffer(user_buf, count, ppos,
+				       buf, n);
+}
+
+static ssize_t wil_write_file_led_cfg(struct file *file,
+				      const char __user *buf_,
+				      size_t count, loff_t *ppos)
+{
+	struct wil6210_priv *wil = file->private_data;
+	int val;
+	int rc;
+
+	rc = kstrtoint_from_user(buf_, count, 0, &val);
+	if (rc) {
+		wil_err(wil, "Invalid argument\n");
+		return rc;
+	}
+
+	wil_info(wil, "%s led %d\n", val ? "Enabling" : "Disabling", led_id);
+	rc = wmi_led_cfg(wil, val);
+	if (rc) {
+		wil_info(wil, "%s led %d failed\n",
+			 val ? "Enabling" : "Disabling", led_id);
+		return rc;
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_led_cfg = {
+	.read = wil_read_file_led_cfg,
+	.write = wil_write_file_led_cfg,
+	.open  = simple_open,
+};
+
+/* led_blink_time, write:
+ * "<blink_on_slow> <blink_off_slow> <blink_on_med> <blink_off_med> <blink_on_fast> <blink_off_fast>
+ */
+static ssize_t wil_write_led_blink_time(struct file *file,
+					const char __user *buf,
+					size_t len, loff_t *ppos)
+{
+	int rc;
+	char *kbuf = kmalloc(len + 1, GFP_KERNEL);
+
+	if (!kbuf)
+		return -ENOMEM;
+
+	rc = simple_write_to_buffer(kbuf, len, ppos, buf, len);
+	if (rc != len) {
+		kfree(kbuf);
+		return rc >= 0 ? -EIO : rc;
+	}
+
+	kbuf[len] = '\0';
+	rc = sscanf(kbuf, "%d %d %d %d %d %d",
+		    &led_blink_time[WIL_LED_TIME_SLOW].on_ms,
+		    &led_blink_time[WIL_LED_TIME_SLOW].off_ms,
+		    &led_blink_time[WIL_LED_TIME_MED].on_ms,
+		    &led_blink_time[WIL_LED_TIME_MED].off_ms,
+		    &led_blink_time[WIL_LED_TIME_FAST].on_ms,
+		    &led_blink_time[WIL_LED_TIME_FAST].off_ms);
+	kfree(kbuf);
+
+	if (rc < 0)
+		return rc;
+	if (rc < 6)
+		return -EINVAL;
+
+	return len;
+}
+
+static ssize_t wil_read_led_blink_time(struct file *file, char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	static char text[400];
+
+	snprintf(text, sizeof(text),
+		 "To set led blink on/off time variables write:\n"
+		 "<blink_on_slow> <blink_off_slow> <blink_on_med> "
+		 "<blink_off_med> <blink_on_fast> <blink_off_fast>\n"
+		 "The current values are:\n"
+		 "%d %d %d %d %d %d\n",
+		 led_blink_time[WIL_LED_TIME_SLOW].on_ms,
+		 led_blink_time[WIL_LED_TIME_SLOW].off_ms,
+		 led_blink_time[WIL_LED_TIME_MED].on_ms,
+		 led_blink_time[WIL_LED_TIME_MED].off_ms,
+		 led_blink_time[WIL_LED_TIME_FAST].on_ms,
+		 led_blink_time[WIL_LED_TIME_FAST].off_ms);
+
+	return simple_read_from_buffer(user_buf, count, ppos, text,
+				       sizeof(text));
+}
+
+static const struct file_operations fops_led_blink_time = {
+	.read = wil_read_led_blink_time,
+	.write = wil_write_led_blink_time,
+	.open  = simple_open,
+};
+
 /*----------------*/
 static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil,
 				       struct dentry *dbg)
@@ -1489,6 +1601,8 @@ static const struct {
 	{"link",	S_IRUGO,		&fops_link},
 	{"info",	S_IRUGO,		&fops_info},
 	{"recovery",	S_IRUGO | S_IWUSR,	&fops_recovery},
+	{"led_cfg",	S_IRUGO | S_IWUSR,	&fops_led_cfg},
+	{"led_blink_time",	S_IRUGO | S_IWUSR,	&fops_led_blink_time},
 };
 
 static void wil6210_debugfs_init_files(struct wil6210_priv *wil,
@@ -1551,6 +1665,7 @@ static const struct dbg_off dbg_statics[] = {
 	{"mem_addr",	S_IRUGO | S_IWUSR, (ulong)&mem_addr, doff_u32},
 	{"vring_idle_trsh", S_IRUGO | S_IWUSR, (ulong)&vring_idle_trsh,
 	 doff_u32},
+	{"led_polarity", S_IRUGO | S_IWUSR, (ulong)&led_polarity, doff_u8},
 	{},
 };
 

drivers/net/wireless/ath/wil6210/main.c

@@ -841,6 +841,9 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
 	wil_bcast_fini(wil);
 
+	/* Disable device led before reset*/
+	wmi_led_cfg(wil, false);
+
 	/* prevent NAPI from being scheduled and prevent wmi commands */
 	mutex_lock(&wil->wmi_mutex);
 	bitmap_zero(wil->status, wil_status_last);

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -546,6 +546,30 @@ struct wil_blob_wrapper {
 	struct debugfs_blob_wrapper blob;
 };
 
+#define WIL_LED_MAX_ID			(2)
+#define WIL_LED_INVALID_ID		(0xF)
+#define WIL_LED_BLINK_ON_SLOW_MS	(300)
+#define WIL_LED_BLINK_OFF_SLOW_MS	(300)
+#define WIL_LED_BLINK_ON_MED_MS		(200)
+#define WIL_LED_BLINK_OFF_MED_MS	(200)
+#define WIL_LED_BLINK_ON_FAST_MS	(100)
+#define WIL_LED_BLINK_OFF_FAST_MS	(100)
+enum {
+	WIL_LED_TIME_SLOW = 0,
+	WIL_LED_TIME_MED,
+	WIL_LED_TIME_FAST,
+	WIL_LED_TIME_LAST,
+};
+
+struct blink_on_off_time {
+	u32 on_ms;
+	u32 off_ms;
+};
+
+extern struct blink_on_off_time led_blink_time[WIL_LED_TIME_LAST];
+extern u8 led_id;
+extern u8 led_polarity;
+
 struct wil6210_priv {
 	struct pci_dev *pdev;
 	struct wireless_dev *wdev;
@@ -834,6 +858,7 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
 int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
 		  u8 chan, u8 hidden_ssid, u8 is_go);
 int wmi_pcp_stop(struct wil6210_priv *wil);
+int wmi_led_cfg(struct wil6210_priv *wil, bool enable);
 void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 			u16 reason_code, bool from_event);
 void wil_probe_client_flush(struct wil6210_priv *wil);

drivers/net/wireless/ath/wil6210/wmi.c

@@ -32,6 +32,11 @@ module_param(agg_wsize, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(agg_wsize, " Window size for Tx Block Ack after connect;"
 		 " 0 - use default; < 0 - don't auto-establish");
 
+u8 led_id = WIL_LED_INVALID_ID;
+module_param(led_id, byte, S_IRUGO);
+MODULE_PARM_DESC(led_id,
+		 " 60G device led enablement. Set the led ID (0-2) to enable");
+
 /**
  * WMI event receiving - theory of operations
  *
@@ -94,6 +99,14 @@ const struct fw_map fw_mapping[] = {
 	 */
 };
 
+struct blink_on_off_time led_blink_time[] = {
+	{WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS},
+	{WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS},
+	{WIL_LED_BLINK_ON_FAST_MS, WIL_LED_BLINK_OFF_FAST_MS},
+};
+
+u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
+
 /**
  * return AHB address for given firmware/ucode internal (linker) address
  * @x - internal address
@@ -971,6 +984,60 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
 	return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
 }
 
+int wmi_led_cfg(struct wil6210_priv *wil, bool enable)
+{
+	int rc = 0;
+	struct wmi_led_cfg_cmd cmd = {
+		.led_mode = enable,
+		.id = led_id,
+		.slow_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].on_ms),
+		.slow_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].off_ms),
+		.medium_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].on_ms),
+		.medium_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].off_ms),
+		.fast_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].on_ms),
+		.fast_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].off_ms),
+		.led_polarity = led_polarity,
+	};
+	struct {
+		struct wmi_cmd_hdr wmi;
+		struct wmi_led_cfg_done_event evt;
+	} __packed reply;
+
+	if (led_id == WIL_LED_INVALID_ID)
+		goto out;
+
+	if (led_id > WIL_LED_MAX_ID) {
+		wil_err(wil, "Invalid led id %d\n", led_id);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	wil_dbg_wmi(wil,
+		    "%s led %d\n",
+		    enable ? "enabling" : "disabling", led_id);
+
+	rc = wmi_call(wil, WMI_LED_CFG_CMDID, &cmd, sizeof(cmd),
+		      WMI_LED_CFG_DONE_EVENTID, &reply, sizeof(reply),
+		      100);
+	if (rc)
+		goto out;
+
+	if (reply.evt.status) {
+		wil_err(wil, "led %d cfg failed with status %d\n",
+			led_id, le32_to_cpu(reply.evt.status));
+		rc = -EINVAL;
+	}
+
+out:
+	return rc;
+}
+
 int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
 		  u8 chan, u8 hidden_ssid, u8 is_go)
 {
@@ -1013,11 +1080,21 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
 	if (reply.evt.status != WMI_FW_STATUS_SUCCESS)
 		rc = -EINVAL;
 
+	if (wmi_nettype != WMI_NETTYPE_P2P)
+		/* Don't fail due to error in the led configuration */
+		wmi_led_cfg(wil, true);
+
 	return rc;
 }
 
 int wmi_pcp_stop(struct wil6210_priv *wil)
 {
+	int rc;
+
+	rc = wmi_led_cfg(wil, false);
+	if (rc)
+		return rc;
+
 	return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0,
 			WMI_PCP_STOPPED_EVENTID, NULL, 0, 20);
 }

drivers/net/wireless/ath/wil6210/wmi.h

@@ -129,6 +129,7 @@ enum wmi_command_id {
 	WMI_THERMAL_THROTTLING_GET_STATUS_CMDID	= 0x855,
 	WMI_OTP_READ_CMDID			= 0x856,
 	WMI_OTP_WRITE_CMDID			= 0x857,
+	WMI_LED_CFG_CMDID			= 0x858,
 	/* Performance monitoring commands */
 	WMI_BF_CTRL_CMDID			= 0x862,
 	WMI_NOTIFY_REQ_CMDID			= 0x863,
@@ -868,6 +869,7 @@ enum wmi_event_id {
 	WMI_RX_MGMT_PACKET_EVENTID		= 0x1840,
 	WMI_TX_MGMT_PACKET_EVENTID		= 0x1841,
 	WMI_OTP_READ_RESULT_EVENTID		= 0x1856,
+	WMI_LED_CFG_DONE_EVENTID		= 0x1858,
 	/* Performance monitoring events */
 	WMI_DATA_PORT_OPEN_EVENTID		= 0x1860,
 	WMI_WBE_LINK_DOWN_EVENTID		= 0x1861,
@@ -1349,4 +1351,63 @@ enum wmi_hidden_ssid {
 	WMI_HIDDEN_SSID_CLEAR		= 0xFE,
 };
 
+/* WMI_LED_CFG_CMDID
+ *
+ * Configure LED On\Off\Blinking operation
+ *
+ * Returned events:
+ * - WMI_LED_CFG_DONE_EVENTID
+ */
+enum led_mode {
+	LED_DISABLE	= 0x00,
+	LED_ENABLE	= 0x01,
+};
+
+/* The names of the led as
+ * described on HW schemes.
+ */
+enum wmi_led_id {
+	WMI_LED_WLAN	= 0x00,
+	WMI_LED_WPAN	= 0x01,
+	WMI_LED_WWAN	= 0x02,
+};
+
+/* Led polarity mode. */
+enum wmi_led_polarity {
+	LED_POLARITY_HIGH_ACTIVE	= 0x00,
+	LED_POLARITY_LOW_ACTIVE		= 0x01,
+};
+
+/* Combination of on and off
+ * creates the blinking period
+ */
+struct wmi_led_blink_mode {
+	__le32 blink_on;
+	__le32 blink_off;
+} __packed;
+
+/* WMI_LED_CFG_CMDID */
+struct wmi_led_cfg_cmd {
+	/* enum led_mode_e */
+	u8 led_mode;
+	/* enum wmi_led_id_e */
+	u8 id;
+	/* slow speed blinking combination */
+	struct wmi_led_blink_mode slow_blink_cfg;
+	/* medium speed blinking combination */
+	struct wmi_led_blink_mode medium_blink_cfg;
+	/* high speed blinking combination */
+	struct wmi_led_blink_mode fast_blink_cfg;
+	/* polarity of the led */
+	u8 led_polarity;
+	/* reserved */
+	u8 reserved;
+} __packed;
+
+/* WMI_LED_CFG_DONE_EVENTID */
+struct wmi_led_cfg_done_event {
+	/* led config status */
+	__le32 status;
+} __packed;
+
 #endif /* __WILOCITY_WMI_H__ */