crypto: hisilicon/hpre - disable FLR triggered by hardware

for Hi1620 hardware, we should disable these hardware flr:
1. BME_FLR - bit 7,
2. PM_FLR - bit 11,
3. SRIOV_FLR - bit 12,
Or HPRE may goto D3 state, when we bind and unbind HPRE quickly,
as it does FLR triggered by BME/PM/SRIOV.

Fixes: c8b4b47("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/hisilicon/hpre/hpre_main.c

@@ -82,6 +82,10 @@
 #define HPRE_CORE_ECC_2BIT_ERR		BIT(1)
 #define HPRE_OOO_ECC_2BIT_ERR		BIT(5)
 
+#define HPRE_QM_BME_FLR			BIT(7)
+#define HPRE_QM_PM_FLR			BIT(11)
+#define HPRE_QM_SRIOV_FLR		BIT(12)
+
 #define HPRE_VIA_MSI_DSM		1
 #define HPRE_SQE_MASK_OFFSET		8
 #define HPRE_SQE_MASK_LEN		24
@@ -230,6 +234,22 @@ static int hpre_cfg_by_dsm(struct hisi_qm *qm)
 	return 0;
 }
 
+/*
+ * For Hi1620, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
+ * Or it may stay in D3 state when we bind and unbind hpre quickly,
+ * as it does FLR triggered by hardware.
+ */
+static void disable_flr_of_bme(struct hisi_qm *qm)
+{
+	u32 val;
+
+	val = readl(HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
+	val &= ~(HPRE_QM_BME_FLR | HPRE_QM_SRIOV_FLR);
+	val |= HPRE_QM_PM_FLR;
+	writel(val, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
+	writel(PEH_AXUSER_CFG_ENABLE, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG_ENABLE));
+}
+
 static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 {
 	struct device *dev = &qm->pdev->dev;
@@ -241,10 +261,6 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 	writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_AWUSER_M_CFG_ENABLE));
 	writel_relaxed(HPRE_QM_AXI_CFG_MASK, HPRE_ADDR(qm, QM_AXI_M_CFG));
 
-	/* disable FLR triggered by BME(bus master enable) */
-	writel(PEH_AXUSER_CFG, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
-	writel(PEH_AXUSER_CFG_ENABLE, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG_ENABLE));
-
 	/* HPRE need more time, we close this interrupt */
 	val = readl_relaxed(HPRE_ADDR(qm, HPRE_QM_ABNML_INT_MASK));
 	val |= BIT(HPRE_TIMEOUT_ABNML_BIT);
@@ -295,6 +311,8 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 	if (ret)
 		dev_err(dev, "acpi_evaluate_dsm err.\n");
 
+	disable_flr_of_bme(qm);
+
 	return ret;
 }