bus: mhi: pci_generic: Add FIREHOSE channels

When device enters flash programmer context (FP), it exposes firehose
protocol through the EDL dedicated channels.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617784860-32439-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

drivers/bus/mhi/pci_generic.c

@@ -145,6 +145,36 @@ struct mhi_pci_dev_info {
 		.doorbell_mode_switch = false,		\
 	}
 
+#define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.num_elements = el_count,		\
+		.event_ring = ev_ring,			\
+		.dir = DMA_TO_DEVICE,			\
+		.ee_mask = BIT(MHI_EE_FP),		\
+		.pollcfg = 0,				\
+		.doorbell = MHI_DB_BRST_DISABLE,	\
+		.lpm_notify = false,			\
+		.offload_channel = false,		\
+		.doorbell_mode_switch = false,		\
+	}						\
+
+#define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.num_elements = el_count,		\
+		.event_ring = ev_ring,			\
+		.dir = DMA_FROM_DEVICE,			\
+		.ee_mask = BIT(MHI_EE_FP),		\
+		.pollcfg = 0,				\
+		.doorbell = MHI_DB_BRST_DISABLE,	\
+		.lpm_notify = false,			\
+		.offload_channel = false,		\
+		.doorbell_mode_switch = false,		\
+	}
+
 #define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
 	{					\
 		.num_elements = el_count,	\
@@ -181,6 +211,8 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
 	MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
 	MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
 	MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
+	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
 	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
 	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
 };
@@ -241,6 +273,9 @@ static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
 	MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
 	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
 	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+	/* The EDL firmware is a flash-programmer exposing firehose protocol */
+	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
 	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
 	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
 };