bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods

Add the clock APIs to set/get/adjust the hw clock, and the related
ioctls and ethtool methods.

v2: Propagate error code from ptp_clock_register().
    Add spinlock to serialize access to the timecounter.  The
    timecounter is accessed in process context and the RX datapath.
    Read the PHC using direct registers.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/Kconfig

@@ -206,6 +206,7 @@ config SYSTEMPORT
 config BNXT
 	tristate "Broadcom NetXtreme-C/E support"
 	depends on PCI
+	imply PTP_1588_CLOCK
 	select FW_LOADER
 	select LIBCRC32C
 	select NET_DEVLINK

drivers/net/ethernet/broadcom/bnxt/Makefile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_BNXT) += bnxt_en.o
 
-bnxt_en-y := bnxt.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.o bnxt_xdp.o bnxt_vfr.o bnxt_devlink.o bnxt_dim.o
+bnxt_en-y := bnxt.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.o bnxt_xdp.o bnxt_ptp.o bnxt_vfr.o bnxt_devlink.o bnxt_dim.o
 bnxt_en-$(CONFIG_BNXT_FLOWER_OFFLOAD) += bnxt_tc.o
 bnxt_en-$(CONFIG_DEBUG_FS) += bnxt_debugfs.o

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -10390,6 +10390,12 @@ static int bnxt_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		return bnxt_hwrm_port_phy_write(bp, mdio->phy_id, mdio->reg_num,
 						mdio->val_in);
 
+	case SIOCSHWTSTAMP:
+		return bnxt_hwtstamp_set(dev, ifr);
+
+	case SIOCGHWTSTAMP:
+		return bnxt_hwtstamp_get(dev, ifr);
+
 	default:
 		/* do nothing */
 		break;

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

@@ -19,9 +19,13 @@
 #include <linux/firmware.h>
 #include <linux/utsname.h>
 #include <linux/time.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
+#include <linux/timecounter.h>
 #include "bnxt_hsi.h"
 #include "bnxt.h"
 #include "bnxt_xdp.h"
+#include "bnxt_ptp.h"
 #include "bnxt_ethtool.h"
 #include "bnxt_nvm_defs.h"	/* NVRAM content constant and structure defs */
 #include "bnxt_fw_hdr.h"	/* Firmware hdr constant and structure defs */
@@ -3926,6 +3930,35 @@ static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
 	return 0;
 }
 
+static int bnxt_get_ts_info(struct net_device *dev,
+			    struct ethtool_ts_info *info)
+{
+	struct bnxt *bp = netdev_priv(dev);
+	struct bnxt_ptp_cfg *ptp;
+
+	ptp = bp->ptp_cfg;
+	info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
+				SOF_TIMESTAMPING_RX_SOFTWARE |
+				SOF_TIMESTAMPING_SOFTWARE;
+
+	info->phc_index = -1;
+	if (!ptp)
+		return 0;
+
+	info->so_timestamping |= SOF_TIMESTAMPING_TX_HARDWARE |
+				 SOF_TIMESTAMPING_RX_HARDWARE |
+				 SOF_TIMESTAMPING_RAW_HARDWARE;
+	if (ptp->ptp_clock)
+		info->phc_index = ptp_clock_index(ptp->ptp_clock);
+
+	info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+	info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+			   (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+			   (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT);
+	return 0;
+}
+
 void bnxt_ethtool_init(struct bnxt *bp)
 {
 	struct hwrm_selftest_qlist_output *resp = bp->hwrm_cmd_resp_addr;
@@ -4172,6 +4205,7 @@ const struct ethtool_ops bnxt_ethtool_ops = {
 	.nway_reset		= bnxt_nway_reset,
 	.set_phys_id		= bnxt_set_phys_id,
 	.self_test		= bnxt_self_test,
+	.get_ts_info		= bnxt_get_ts_info,
 	.reset			= bnxt_reset,
 	.set_dump		= bnxt_set_dump,
 	.get_dump_flag		= bnxt_get_dump_flag,