Merge branch 'dpaa_eth-next'

Madalin Bucur says:

====================
dpaa_eth: Add the QorIQ DPAA Ethernet driver

This patch series adds the Ethernet driver for the Freescale
QorIQ Data Path Acceleration Architecture (DPAA).

This version includes changes following the feedback received
on previous versions from Eric Dumazet, Bob Cochran, Joe Perches,
Paul Bolle, Joakim Tjernlund, Scott Wood, David Miller - thank you.

Together with the driver a managed version of alloc_percpu
is provided that simplifies the release of per-CPU memory.

The Freescale DPAA architecture consists in a series of hardware
blocks that support the Ethernet connectivity. The Ethernet driver
depends upon the following drivers that are currently in the Linux
kernel:
 - Peripheral Access Memory Unit (PAMU)
    drivers/iommu/fsl_*
 - Frame Manager (FMan) added in v4.4
    drivers/net/ethernet/freescale/fman
 - Queue Manager (QMan), Buffer Manager (BMan) added in v4.9-rc1
    drivers/soc/fsl/qbman

dpaa_eth interfaces mapping to FMan MACs:

  dpaa_eth       /eth0\     ...       /ethN\
  driver        |      |             |      |
  -------------   ----   -----------   ----   -------------
       -Ports  / Tx  Rx \    ...    / Tx  Rx \
  FMan        |          |         |          |
       -MACs  |   MAC0   |         |   MACN   |
             /   dtsec0   \  ...  /   dtsecN   \ (or tgec)
            /              \     /              \(or memac)
  ---------  --------------  ---  --------------  ---------
      FMan, FMan Port, FMan SP, FMan MURAM drivers
  ---------------------------------------------------------
      FMan HW blocks: MURAM, MACs, Ports, SP
  ---------------------------------------------------------

dpaa_eth relation to QMan, FMan:
              ________________________________
  dpaa_eth   /            eth0                \
  driver    /                                  \
  ---------   -^-   -^-   -^-   ---    ---------
  QMan driver / \   / \   / \  \   /  | BMan    |
             |Rx | |Rx | |Tx | |Tx |  | driver  |
  ---------  |Dfl| |Err| |Cnf| |FQs|  |         |
  QMan HW    |FQ | |FQ | |FQ | |   |  |         |
             /   \ /   \ /   \  \ /   |         |
  ---------   ---   ---   ---   -v-    ---------
            |        FMan QMI         |         |
            | FMan HW       FMan BMI  | BMan HW |
              -----------------------   --------

where the acronyms used above (and in the code) are:
DPAA = Data Path Acceleration Architecture
FMan = DPAA Frame Manager
QMan = DPAA Queue Manager
BMan = DPAA Buffers Manager
QMI = QMan interface in FMan
BMI = BMan interface in FMan
FMan SP = FMan Storage Profiles
MURAM = Multi-user RAM in FMan
FQ = QMan Frame Queue
Rx Dfl FQ = default reception FQ
Rx Err FQ = Rx error frames FQ
Tx Cnf FQ = Tx confirmation FQ
Tx FQs = transmission frame queues
dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
tgec = ten gigabit Ethernet controller (10 Gbps)
memac = multirate Ethernet MAC (10/100/1000/10000)

Changes from v7:
 - remove the debug option to use a common buffer pool for all the
   interfaces

Changed from v6:
 - fixed an issue on an error path in dpaa_set_mac_address()
 - removed NDO operation definitions that were not needed
 - sorted the local variable declarations
 - cleaned up a few checkpatch checks
 - removed friendly network interface naming code

Changes from v5:
 - adapt to the latest Q/BMan drivers API
 - use build_skb() on Rx path instead of buffer pool refill path
 - proper support for multiple buffer pools
 - align function, variable names, code cleanup
 - driver file structure cleanup

Changes from v4:
 - addressed feedback from Scott Wood and Joe Perches
 - fixed spelling
 - fixed leak of uninitialized stack to userspace
 - fix prints
 - replace raw_cpu_ptr() with this_cpu_ptr()
 - remove _s from the end of structure names
 - remove underscores at start of functions, goto labels
 - remove likely in error paths
 - use container_of() instead of open casts
 - remove priv from the driver name
 - move return type on same line with function name
 - drop DPA_READ_SKB_PTR/DPA_WRITE_SKB_PTR

Changes from v3:
 - removed bogus delay and comment in .ndo_stop implementation
 - addressed minor issues reported by David Miller

Changes from v2:
 - removed debugfs, moved exports to ethtool statistics
 - removed congestion groups Kconfig params

Changes from v1:
 - bpool level Kconfig options removed
 - print format using pr_fmt, cleaned up prints
 - __hot/__cold removed
 - gratuitous unlikely() removed
 - code style aligned, consistent spacing for declarations
 - comment formatting
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/driver-model/devres.txt

@@ -332,6 +332,10 @@ MEM
 MFD
  devm_mfd_add_devices()
 
+PER-CPU MEM
+  devm_alloc_percpu()
+  devm_free_percpu()
+
 PCI
   pcim_enable_device()	: after success, all PCI ops become managed
   pcim_pin_device()	: keep PCI device enabled after release

arch/powerpc/configs/dpaa.config

@@ -1 +1,4 @@
 CONFIG_FSL_DPAA=y
+CONFIG_FSL_PAMU=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y

drivers/base/devres.c

@@ -10,6 +10,7 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/percpu.h>
 
 #include "base.h"
 
@@ -985,3 +986,68 @@ void devm_free_pages(struct device *dev, unsigned long addr)
 			       &devres));
 }
 EXPORT_SYMBOL_GPL(devm_free_pages);
+
+static void devm_percpu_release(struct device *dev, void *pdata)
+{
+	void __percpu *p;
+
+	p = *(void __percpu **)pdata;
+	free_percpu(p);
+}
+
+static int devm_percpu_match(struct device *dev, void *data, void *p)
+{
+	struct devres *devr = container_of(data, struct devres, data);
+
+	return *(void **)devr->data == p;
+}
+
+/**
+ * __devm_alloc_percpu - Resource-managed alloc_percpu
+ * @dev: Device to allocate per-cpu memory for
+ * @size: Size of per-cpu memory to allocate
+ * @align: Alignment of per-cpu memory to allocate
+ *
+ * Managed alloc_percpu. Per-cpu memory allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * RETURNS:
+ * Pointer to allocated memory on success, NULL on failure.
+ */
+void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
+		size_t align)
+{
+	void *p;
+	void __percpu *pcpu;
+
+	pcpu = __alloc_percpu(size, align);
+	if (!pcpu)
+		return NULL;
+
+	p = devres_alloc(devm_percpu_release, sizeof(void *), GFP_KERNEL);
+	if (!p) {
+		free_percpu(pcpu);
+		return NULL;
+	}
+
+	*(void __percpu **)p = pcpu;
+
+	devres_add(dev, p);
+
+	return pcpu;
+}
+EXPORT_SYMBOL_GPL(__devm_alloc_percpu);
+
+/**
+ * devm_free_percpu - Resource-managed free_percpu
+ * @dev: Device this memory belongs to
+ * @pdata: Per-cpu memory to free
+ *
+ * Free memory allocated with devm_alloc_percpu().
+ */
+void devm_free_percpu(struct device *dev, void __percpu *pdata)
+{
+	WARN_ON(devres_destroy(dev, devm_percpu_release, devm_percpu_match,
+			       (void *)pdata));
+}
+EXPORT_SYMBOL_GPL(devm_free_percpu);

drivers/net/ethernet/freescale/Kconfig

@@ -93,4 +93,6 @@ config GIANFAR
 	  and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
 	  on the 8540.
 
+source "drivers/net/ethernet/freescale/dpaa/Kconfig"
+
 endif # NET_VENDOR_FREESCALE

drivers/net/ethernet/freescale/Makefile

@@ -22,3 +22,4 @@ obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
 ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
 
 obj-$(CONFIG_FSL_FMAN) += fman/
+obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/

drivers/net/ethernet/freescale/dpaa/Kconfig

@@ -0,0 +1,10 @@
+menuconfig FSL_DPAA_ETH
+	tristate "DPAA Ethernet"
+	depends on FSL_SOC && FSL_DPAA && FSL_FMAN
+	select PHYLIB
+	select FSL_FMAN_MAC
+	---help---
+	  Data Path Acceleration Architecture Ethernet driver,
+	  supporting the Freescale QorIQ chips.
+	  Depends on Freescale Buffer Manager and Queue Manager
+	  driver and Frame Manager Driver.

drivers/net/ethernet/freescale/dpaa/Makefile

@@ -0,0 +1,12 @@
+#
+# Makefile for the Freescale DPAA Ethernet controllers
+#
+
+# Include FMan headers
+FMAN        = $(srctree)/drivers/net/ethernet/freescale/fman
+ccflags-y += -I$(FMAN)
+
+obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
+
+fsl_dpa-objs += dpaa_eth.o dpaa_ethtool.o dpaa_eth_sysfs.o
+CFLAGS_dpaa_eth.o := -I$(src)