mtd: nand: Remove BUG() abuse in nand_scan_tail

There's no reason to BUG() when parameters are being
validated. Drivers can get things wrong, and it's much nicer
to just throw a noisy warn and fail gracefully, than calling
BUG() and throwing the whole system down the drain.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drivers/mtd/nand/nand_base.c

@@ -4107,10 +4107,12 @@ int nand_scan_tail(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	struct nand_buffers *nbuf;
+	int ret;
 
 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
-	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
-			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+	if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+		   !(chip->bbt_options & NAND_BBT_USE_FLASH)))
+		return -EINVAL;
 
 	if (!(chip->options & NAND_OWN_BUFFERS)) {
 		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
@@ -4148,9 +4150,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 			ecc->layout = &nand_oob_128;
 			break;
 		default:
-			pr_warn("No oob scheme defined for oobsize %d\n",
-				   mtd->oobsize);
-			BUG();
+			WARN(1, "No oob scheme defined for oobsize %d\n",
+				mtd->oobsize);
+			ret = -EINVAL;
+			goto err_free;
 		}
 	}
 
@@ -4166,8 +4169,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
-			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
-			BUG();
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		if (!ecc->read_page)
 			ecc->read_page = nand_read_page_hwecc_oob_first;
@@ -4197,8 +4201,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 		     ecc->read_page == nand_read_page_hwecc ||
 		     !ecc->write_page ||
 		     ecc->write_page == nand_write_page_hwecc)) {
-			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
-			BUG();
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		/* Use standard syndrome read/write page function? */
 		if (!ecc->read_page)
@@ -4216,8 +4221,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 		if (mtd->writesize >= ecc->size) {
 			if (!ecc->strength) {
-				pr_warn("Driver must set ecc.strength when using hardware ECC\n");
-				BUG();
+				WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+				ret = -EINVAL;
+				goto err_free;
 			}
 			break;
 		}
@@ -4243,8 +4249,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	case NAND_ECC_SOFT_BCH:
 		if (!mtd_nand_has_bch()) {
-			pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
-			BUG();
+			WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		ecc->calculate = nand_bch_calculate_ecc;
 		ecc->correct = nand_bch_correct_data;
@@ -4269,8 +4276,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 		ecc->bytes = 0;
 		ecc->priv = nand_bch_init(mtd);
 		if (!ecc->priv) {
-			pr_warn("BCH ECC initialization failed!\n");
-			BUG();
+			WARN(1, "BCH ECC initialization failed!\n");
+			ret = -EINVAL;
+			goto err_free;
 		}
 		break;
 
@@ -4288,8 +4296,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 		break;
 
 	default:
-		pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
-		BUG();
+		WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+		ret = -EINVAL;
+		goto err_free;
 	}
 
 	/* For many systems, the standard OOB write also works for raw */
@@ -4319,8 +4328,9 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 */
 	ecc->steps = mtd->writesize / ecc->size;
 	if (ecc->steps * ecc->size != mtd->writesize) {
-		pr_warn("Invalid ECC parameters\n");
-		BUG();
+		WARN(1, "Invalid ECC parameters\n");
+		ret = -EINVAL;
+		goto err_free;
 	}
 	ecc->total = ecc->steps * ecc->bytes;
 
@@ -4398,6 +4408,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	/* Build bad block table */
 	return chip->scan_bbt(mtd);
+err_free:
+	if (!(chip->options & NAND_OWN_BUFFERS))
+		kfree(chip->buffers);
+	return ret;
 }
 EXPORT_SYMBOL(nand_scan_tail);