Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller: 1) Fix free/alloc races in batmanadv, from Sven Eckelmann. 2) Several leaks and other fixes in kTLS support of mlx5 driver, from Tariq Toukan. 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke Høiland-Jørgensen. 4) Add an r8152 device ID, from Kazutoshi Noguchi. 5) Missing include in ipv6's addrconf.c, from Ben Dooks. 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can easily infer the 32-bit secret otherwise etc. 7) Several netdevice nesting depth fixes from Taehee Yoo. 8) Fix several KCSAN reported errors, from Eric Dumazet. For example, when doing lockless skb_queue_empty() checks, and accessing sk_napi_id/sk_incoming_cpu lockless as well. 9) Fix jumbo packet handling in RXRPC, from David Howells. 10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet. 11) Fix DMA synchronization in gve driver, from Yangchun Fu. 12) Several bpf offload fixes, from Jakub Kicinski. 13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo. 14) Fix ping latency during high traffic rates in hisilicon driver, from Jiangfent Xiao. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) net: fix installing orphaned programs net: cls_bpf: fix NULL deref on offload filter removal selftests: bpf: Skip write only files in debugfs selftests: net: reuseport_dualstack: fix uninitalized parameter r8169: fix wrong PHY ID issue with RTL8168dp net: dsa: bcm_sf2: Fix IMP setup for port different than 8 net: phylink: Fix phylink_dbg() macro gve: Fixes DMA synchronization. inet: stop leaking jiffies on the wire ixgbe: Remove duplicate clear_bit() call Documentation: networking: device drivers: Remove stray asterisks e1000: fix memory leaks i40e: Fix receive buffer starvation for AF_XDP igb: Fix constant media auto sense switching when no cable is connected net: ethernet: arc: add the missed clk_disable_unprepare igb: Enable media autosense for the i350. igb/igc: Don't warn on fatal read failures when the device is removed tcp: increase tcp_max_syn_backlog max value net: increase SOMAXCONN to 4096 netdevsim: Fix use-after-free during device dismantle ...
mariux64 · Nov 2, 2019 · 1204c70 · 1204c70
2 parents 372bf6c + aeb1b85
commit 1204c70
Show file tree

Hide file tree

Showing 213 changed files with 2,133 additions and 1,289 deletions.
diff --git a/Documentation/networking/device_drivers/intel/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
-==============================================================
+=============================================================
+Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
+=============================================================
 
 June 1, 2018
 
@@ -21,7 +21,7 @@ Contents
 In This Release
 ===============
 
-This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
+This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
 Adapters. This driver includes support for Itanium(R)2-based systems.
 
 For questions related to hardware requirements, refer to the documentation
@@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality.
 The latest release of ethtool can be found from
 https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is provided through the ethtool* utility.  For instructions on
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is provided through the ethtool utility.  For instructions on
 enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
 enabled on the system during the next shut down or reboot.  For this
 driver version, in order to enable WoL, the e100 driver must be loaded

diff --git a/Documentation/networking/device_drivers/intel/e1000.rst b/Documentation/networking/device_drivers/intel/e1000.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999 - 2013 Intel Corporation.
@@ -438,10 +438,10 @@ ethtool
   The latest release of ethtool can be found from
   https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
+Enabling Wake on LAN (WoL)
+--------------------------
 
-  WoL is configured through the ethtool* utility.
+  WoL is configured through the ethtool utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be

diff --git a/Documentation/networking/device_drivers/intel/e1000e.rst b/Documentation/networking/device_drivers/intel/e1000e.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-======================================================
-Linux* Driver for Intel(R) Ethernet Network Connection
-======================================================
+=====================================================
+Linux Driver for Intel(R) Ethernet Network Connection
+=====================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 2008-2018 Intel Corporation.
@@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to
 manually set devices for 1 Gbps and higher.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must
@@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters
 operate only in full duplex and only at their native speed.
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the e1000e driver must be loaded

diff --git a/Documentation/networking/device_drivers/intel/fm10k.rst b/Documentation/networking/device_drivers/intel/fm10k.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
-==============================================================
+=============================================================
+Linux Base Driver for Intel(R) Ethernet Multi-host Controller
+=============================================================
 
 August 20, 2018
 Copyright(c) 2015-2018 Intel Corporation.
@@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
----------------------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM
+-------------------------------------------------------------------------------------
 KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
 includes traditional PCIe devices, as well as SR-IOV-capable devices based on
 the Intel Ethernet Controller XL710.

diff --git a/Documentation/networking/device_drivers/intel/i40e.rst b/Documentation/networking/device_drivers/intel/i40e.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
-==================================================================
+=================================================================
+Linux Base Driver for the Intel(R) Ethernet Controller 700 Series
+=================================================================
 
 Intel 40 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
 Network Adapter XXV710 based devices.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must

diff --git a/Documentation/networking/device_drivers/intel/iavf.rst b/Documentation/networking/device_drivers/intel/iavf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
-==================================================================
+=================================================================
+Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function
+=================================================================
 
 Intel Ethernet Adaptive Virtual Function Linux driver.
 Copyright(c) 2013-2018 Intel Corporation.
@@ -19,7 +19,7 @@ Contents
 Overview
 ========
 
-This file describes the iavf Linux* Base Driver. This driver was formerly
+This file describes the iavf Linux Base Driver. This driver was formerly
 called i40evf.
 
 The iavf driver supports the below mentioned virtual function devices and

diff --git a/Documentation/networking/device_drivers/intel/ice.rst b/Documentation/networking/device_drivers/intel/ice.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===================================================================
-Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
-===================================================================
+==================================================================
+Linux Base Driver for the Intel(R) Ethernet Connection E800 Series
+==================================================================
 
 Intel ice Linux driver.
 Copyright(c) 2018 Intel Corporation.

diff --git a/Documentation/networking/device_drivers/intel/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -129,9 +129,9 @@ version is required for this functionality. Download it at:
 https://www.kernel.org/pub/software/network/ethtool/
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the igb driver must be loaded

diff --git a/Documentation/networking/device_drivers/intel/igbvf.rst b/Documentation/networking/device_drivers/intel/igbvf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-============================================================
-Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
-============================================================
+===========================================================
+Linux Base Virtual Function Driver for Intel(R) 1G Ethernet
+===========================================================
 
 Intel Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

diff --git a/Documentation/networking/device_drivers/intel/ixgbe.rst b/Documentation/networking/device_drivers/intel/ixgbe.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================================
-Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
-=============================================================================
+===========================================================================
+Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
+===========================================================================
 
 Intel 10 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS
+---------------------------------------------------------------------
 Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
 This includes traditional PCIe devices, as well as SR-IOV-capable devices based
 on the Intel Ethernet Controller XL710.

diff --git a/Documentation/networking/device_drivers/intel/ixgbevf.rst b/Documentation/networking/device_drivers/intel/ixgbevf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================
-Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
-=============================================================
+============================================================
+Linux Base Virtual Function Driver for Intel(R) 10G Ethernet
+============================================================
 
 Intel 10 Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

diff --git a/Documentation/networking/device_drivers/pensando/ionic.rst b/Documentation/networking/device_drivers/pensando/ionic.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==========================================================
-Linux* Driver for the Pensando(R) Ethernet adapter family
-==========================================================
+========================================================
+Linux Driver for the Pensando(R) Ethernet adapter family
+========================================================
 
 Pensando Linux Ethernet driver.
 Copyright(c) 2019 Pensando Systems, Inc

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
@@ -207,8 +207,8 @@ TCP variables:
 
 somaxconn - INTEGER
 	Limit of socket listen() backlog, known in userspace as SOMAXCONN.
-	Defaults to 128.  See also tcp_max_syn_backlog for additional tuning
-	for TCP sockets.
+	Defaults to 4096. (Was 128 before linux-5.4)
+	See also tcp_max_syn_backlog for additional tuning for TCP sockets.
 
 tcp_abort_on_overflow - BOOLEAN
 	If listening service is too slow to accept new connections,
@@ -408,11 +408,14 @@ tcp_max_orphans - INTEGER
 	up to ~64K of unswappable memory.
 
 tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests, which have not
-	received an acknowledgment from connecting client.
+	Maximal number of remembered connection requests (SYN_RECV),
+	which have not received an acknowledgment from connecting client.
+	This is a per-listener limit.
 	The minimal value is 128 for low memory machines, and it will
 	increase in proportion to the memory of machine.
 	If server suffers from overload, try increasing this number.
+	Remember to also check /proc/sys/net/core/somaxconn
+	A SYN_RECV request socket consumes about 304 bytes of memory.
 
 tcp_max_tw_buckets - INTEGER
 	Maximal number of timewait sockets held by system simultaneously.

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -11408,7 +11408,6 @@ F:	include/trace/events/tcp.h
 NETWORKING [TLS]
 M:	Boris Pismenny <borisp@mellanox.com>
 M:	Aviad Yehezkel <aviadye@mellanox.com>
-M:	Dave Watson <davejwatson@fb.com>
 M:	John Fastabend <john.fastabend@gmail.com>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 M:	Jakub Kicinski <jakub.kicinski@netronome.com>

diff --git a/drivers/crypto/chelsio/chtls/chtls_cm.c b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1297,7 +1297,7 @@ static void make_established(struct sock *sk, u32 snd_isn, unsigned int opt)
 	tp->write_seq = snd_isn;
 	tp->snd_nxt = snd_isn;
 	tp->snd_una = snd_isn;
-	inet_sk(sk)->inet_id = tp->write_seq ^ jiffies;
+	inet_sk(sk)->inet_id = prandom_u32();
 	assign_rxopt(sk, opt);
 
 	if (tp->rcv_wnd > (RCV_BUFSIZ_M << 10))

diff --git a/drivers/crypto/chelsio/chtls/chtls_io.c b/drivers/crypto/chelsio/chtls/chtls_io.c
@@ -1702,7 +1702,7 @@ int chtls_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
 		return peekmsg(sk, msg, len, nonblock, flags);
 
 	if (sk_can_busy_loop(sk) &&
-	    skb_queue_empty(&sk->sk_receive_queue) &&
+	    skb_queue_empty_lockless(&sk->sk_receive_queue) &&
 	    sk->sk_state == TCP_ESTABLISHED)
 		sk_busy_loop(sk, nonblock);
 

diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
@@ -744,7 +744,7 @@ capi_poll(struct file *file, poll_table *wait)
 
 	poll_wait(file, &(cdev->recvwait), wait);
 	mask = EPOLLOUT | EPOLLWRNORM;
-	if (!skb_queue_empty(&cdev->recvqueue))
+	if (!skb_queue_empty_lockless(&cdev->recvqueue))
 		mask |= EPOLLIN | EPOLLRDNORM;
 	return mask;
 }

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
@@ -952,7 +952,7 @@ static int alb_upper_dev_walk(struct net_device *upper, void *_data)
 	struct bond_vlan_tag *tags;
 
 	if (is_vlan_dev(upper) &&
-	    bond->nest_level == vlan_get_encap_level(upper) - 1) {
+	    bond->dev->lower_level == upper->lower_level - 1) {
 		if (upper->addr_assign_type == NET_ADDR_STOLEN) {
 			alb_send_lp_vid(slave, mac_addr,
 					vlan_dev_vlan_proto(upper),