Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/tiwai/sound

Pull sound updates from Takashi Iwai:
 "A relative calm release at this time with a flat diffstat.  The only
  significant change in the ALSA core side is the support for more than
  32 card instances, configurable via kconfig.  Other than that, in both
  ASoC and other parts, mostly some improvements and fixes on the driver
  side.

   - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes
   - hda: Haswell HDMI audio fixes, runtime PM improvements
   - hda: Intel BayTrail support, ALC5505 DSP support
   - es1968: MediaForte M56VAP support
   - usb-audio: Improved support for Yamaha/Roland devices
   - usb-audio: M2Tech hiFace, Audio Advantage Micro II support
   - hdspm: wordclock fixes
   - ASoC: Pending fixes for WM8962
   - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500
   - ASoC: Generalisation of the Bluetooth and HDMI stub drivers
   - ASoC: SSM2518 and RT5640 codec drivers.
   - ASoC: Tegra CPUs with RT5640 machine driver
   - ASoC: AC'97 refactoring bug fixes
   - ASoC: ADAU1701 driver fixes
   - Clean up of *_set_drvdata() in a wide range of drivers"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits)
  ALSA: vmaster: Fix the regression of missing vmaster hook call
  ALSA: hda - Add Dell SSID to support Headset Mic recording
  ASoC: adau1701: remove control_data assignment
  ASoC: adau1701: more direct regmap usage
  ASoC: ac97: fixup multi-platform AC'97 module build failure
  ASoC: pxa2xx: fixup multi-platform AC'97 build failures
  ASoC: tegra20-ac97: Remove unused variable
  ASoC: tegra20-ac97: Remove duplicate error message
  ALSA: usb-audio: Add Audio Advantage Micro II
  ASoC: tas5086: fix Mid-Z implementation
  ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size
  ALSA: Replace the magic number 44 with const
  ALSA: hda - Fix the max length of control name in generic parser
  ALSA: hda - Guess what, it's two more Dell headset mic quirks
  ALSA: hda - Yet another Dell headset mic quirk
  ALSA: hda - Add support for ALC5505 DSP power-save mode
  ASoC: mfld: Remove unused variable
  ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE
  ALSA: usb-audio: claim autodetected PCM interfaces all at once
  ALSA: usb-audio: remove superfluous Roland quirks
  ...

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -0,0 +1,62 @@
+Wolfson Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilites and a range
+of analogue I/O.
+
+Required properties:
+
+  - compatible : one of the following chip-specific strings:
+	"wlf,wm5102"
+	"wlf,wm5110"
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - interrupts : The interrupt line the /IRQ signal for the device is
+    connected to.
+  - interrupt-controller : Arizona class devices contain interrupt controllers
+    and may provide interrupt services to other devices.
+  - interrupt-parent : The parent interrupt controller.
+  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    Documentation/devicetree/bindings/interrupts.txt
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+  - AVDD1-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
+    SPKVDDL-supply, SPKVDDR-supply : power supplies for the device, as covered
+    in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - wlf,reset : GPIO specifier for the GPIO controlling /RESET
+  - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
+
+  - wlf,gpio-defaults : A list of GPIO configuration register values. If
+    absent, no configuration of these registers is performed. If any
+    entry has a value that is out of range for a 16 bit register then
+    the chip default will be used.  If present exactly five values must
+    be specified.
+
+Example:
+
+codec: wm5102@1a {
+	compatible = "wlf,wm5102";
+	reg = <0x1a>;
+	interrupts = <347>;
+	#interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	wlf,gpio-defaults = <
+		0x00000000, /* AIF1TXLRCLK */
+		0xffffffff,
+		0xffffffff,
+		0xffffffff,
+		0xffffffff,
+	>;
+};

Documentation/devicetree/bindings/sound/adi,adau1701.txt

@@ -0,0 +1,35 @@
+Analog Devices ADAU1701
+
+Required properties:
+
+ - compatible:		Should contain "adi,adau1701"
+ - reg:			The i2c address. Value depends on the state of ADDR0
+			and ADDR1, as wired in hardware.
+
+Optional properties:
+
+ - reset-gpio: 		A GPIO spec to define which pin is connected to the
+			chip's !RESET pin. If specified, the driver will
+			assert a hardware reset at probe time.
+ - adi,pll-mode-gpios:	An array of two GPIO specs to describe the GPIOs
+			the ADAU's PLL config pins are connected to.
+			The state of the pins are set according to the
+			configured clock divider on ASoC side before the
+			firmware is loaded.
+ - adi,pin-config:	An array of 12 numerical values selecting one of the
+			pin configurations as described in the datasheet,
+			table 53. Note that the value of this property has
+			to be prefixed with '/bits/ 8'.
+
+Examples:
+
+	i2c_bus {
+		adau1701@34 {
+			compatible = "adi,adau1701";
+			reg = <0x34>;
+			reset-gpio = <&gpio 23 0>;
+			adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
+			adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
+                                                   0x4 0x4 0x4 0x4 0x4 0x4>;
+		};
+	};

Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt

@@ -0,0 +1,46 @@
+Freescale i.MX audio complex with WM8962 codec
+
+Required properties:
+- compatible : "fsl,imx-audio-wm8962"
+- model : The user-visible name of this sound complex
+- ssi-controller : The phandle of the i.MX SSI controller
+- audio-codec : The phandle of the WM8962 audio codec
+- audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names could be power
+  supplies, WM8962 pins, and the jacks on the board:
+
+  Power supplies:
+   * Mic Bias
+
+  Board connectors:
+   * Mic Jack
+   * Headphone Jack
+   * Ext Spk
+
+- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port : The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx6q-sabresd-wm8962",
+		     "fsl,imx-audio-wm8962";
+	model = "wm8962-audio";
+	ssi-controller = <&ssi2>;
+	audio-codec = <&codec>;
+		audio-routing =
+		"Headphone Jack", "HPOUTL",
+		"Headphone Jack", "HPOUTR",
+		"Ext Spk", "SPKOUTL",
+		"Ext Spk", "SPKOUTR",
+		"MICBIAS", "AMIC",
+		"IN3R", "MICBIAS",
+		"DMIC", "MICBIAS",
+		"DMICDAT", "DMIC";
+	mux-int-port = <2>;
+	mux-ext-port = <3>;
+};

Documentation/devicetree/bindings/sound/mxs-saif.txt

@@ -3,8 +3,11 @@
 Required properties:
 - compatible: Should be "fsl,<chip>-saif"
 - reg: Should contain registers location and length
-- interrupts: Should contain ERROR and DMA interrupts
-- fsl,saif-dma-channel: APBX DMA channel for the SAIF
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and SAIF DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
 
 Optional properties:
 - fsl,saif-master: phandle to the master SAIF.  It's only required for
@@ -23,14 +26,16 @@ aliases {
 saif0: saif@80042000 {
 	compatible = "fsl,imx28-saif";
 	reg = <0x80042000 2000>;
-	interrupts = <59 80>;
-	fsl,saif-dma-channel = <4>;
+	interrupts = <59>;
+	dmas = <&dma_apbx 4>;
+	dma-names = "rx-tx";
 };
 
 saif1: saif@80046000 {
 	compatible = "fsl,imx28-saif";
 	reg = <0x80046000 2000>;
-	interrupts = <58 81>;
-	fsl,saif-dma-channel = <5>;
+	interrupts = <58>;
+	dmas = <&dma_apbx 5>;
+	dma-names = "rx-tx";
 	fsl,saif-master = <&saif0>;
 };

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt

@@ -0,0 +1,71 @@
+NVIDIA Tegra audio complex, with RT5640 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-rt5640"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the RT5640's pins, and the jacks on the board:
+
+  RT5640 pins:
+
+  * DMIC1
+  * DMIC2
+  * MICBIAS1
+  * IN1P
+  * IN1R
+  * IN2P
+  * IN2R
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOP
+  * MONON
+  * SPOLP
+  * SPOLN
+  * SPORP
+  * SPORN
+
+  Board connectors:
+
+  * Headphones
+  * Speakers
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the RT5640 audio codec. This binding
+  assumes that AIF1 on the CODEC is connected to Tegra.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-rt5640-dalmore",
+			"nvidia,tegra-audio-rt5640";
+	nvidia,model = "NVIDIA Tegra Dalmore";
+
+	nvidia,audio-routing =
+		"Headphones", "HPOR",
+		"Headphones", "HPOL",
+		"Speakers", "SPORP",
+		"Speakers", "SPORN",
+		"Speakers", "SPOLP",
+		"Speakers", "SPOLN";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&rt5640>;
+
+	nvidia,hp-det-gpios = <&gpio 143 0>; /* GPIO PR7 */
+
+	clocks = <&tegra_car 216>, <&tegra_car 217>, <&tegra_car 120>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};

Documentation/devicetree/bindings/sound/rt5640.txt

@@ -0,0 +1,30 @@
+RT5640 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5640".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+  Boolean. Indicate MIC1/2 input are differential, rather than single-ended.
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Example:
+
+rt5640 {
+	compatible = "realtek,rt5640";
+	reg = <0x1c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -5,9 +5,12 @@ Required properties:
 
 - reg : the I2C address of the device
 
+- clocks : the clock provider of SYS_MCLK
+
 Example:
 
 codec: sgtl5000@0a {
 	compatible = "fsl,sgtl5000";
 	reg = <0x0a>;
+	clocks = <&clks 150>;
 };

Documentation/devicetree/bindings/sound/spdif-receiver.txt

@@ -0,0 +1,10 @@
+Device-Tree bindings for dummy spdif receiver
+
+Required properties:
+	- compatible: should be "linux,spdif-dir".
+
+Example node:
+
+	codec: spdif-receiver {
+		compatible = "linux,spdif-dir";
+	};

Documentation/devicetree/bindings/sound/spdif-transmitter.txt

@@ -0,0 +1,10 @@
+Device-Tree bindings for dummy spdif transmitter
+
+Required properties:
+	- compatible: should be "linux,spdif-dit".
+
+Example node:
+
+	codec: spdif-transmitter {
+		compatible = "linux,spdif-dit";
+	};

Documentation/devicetree/bindings/sound/ssm2518.txt

@@ -0,0 +1,20 @@
+SSM2518 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm2518"
+  - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
+	or 0x35 (ADDR pin high)
+
+Optional properties:
+  - gpios : GPIO connected to the nSD pin. If the property is not present it is
+	        assumed that the nSD pin is hardwired to always on.
+
+Example:
+
+	ssm2518: ssm2518@34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		gpios = <&gpio 5 0>;
+	};

Documentation/devicetree/bindings/sound/ti,tas5086.txt

@@ -20,6 +20,17 @@ Optional properties:
 			When not specified, the hardware default of 1300ms
 			is retained.
 
+ - ti,mid-z-channel-X:	Boolean properties, X being a number from 1 to 6.
+			If given, channel X will start with the Mid-Z start
+			sequence, otherwise the default Low-Z scheme is used.
+
+			The correct configuration depends on how the power
+			stages connected to the PWM output pins work. Not all
+			power stages are compatible to Mid-Z - please refer
+			to the datasheets for more details.
+
+			Most systems should not set any of these properties.
+
 Examples:
 
 	i2c_bus {

Documentation/devicetree/bindings/sound/wm8962.txt

@@ -8,9 +8,32 @@ Required properties:
 
   - reg : the I2C address of the device.
 
+Optional properties:
+  - spk-mono: This is a boolean property. If present, the SPK_MONO bit
+    of R51 (Class D Control 2) gets set, indicating that the speaker is
+    in mono mode.
+
+  - mic-cfg : Default register value for R48 (Additional Control 4).
+    If absent, the default should be the register default.
+
+  - gpio-cfg : A list of GPIO configuration register values. The list must
+    be 6 entries long. If absent, no configuration of these registers is
+    performed. And note that only the value within [0x0, 0xffff] is valid.
+    Any other value is regarded as setting the GPIO register by its reset
+    value 0x0.
+
 Example:
 
 codec: wm8962@1a {
 	compatible = "wlf,wm8962";
 	reg = <0x1a>;
+
+	gpio-cfg = <
+		0x0000 /* 0:Default */
+		0x0000 /* 1:Default */
+		0x0013 /* 2:FN_DMICCLK */
+		0x0000 /* 3:Default */
+		0x8014 /* 4:FN_DMICCDAT */
+		0x0000 /* 5:Default */
+	>;
 };