Merge branch 'bcm7xxx-cleanups'

Florian Fainelli says:

====================
net: phy: bcm7xxx: Misc cleanups

These two patches are cleanups to the BCM7xxx internal PHY driver:

- fix a constant name missing a X (as in BCM7XXX)
- add a macro to reduce the amount of code duplication to add new entries
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/bcm7xxx.c

@@ -24,7 +24,7 @@
 #define MII_BCM7XXX_100TX_FALSE_CAR	0x13
 #define MII_BCM7XXX_100TX_DISC		0x14
 #define MII_BCM7XXX_AUX_MODE		0x1d
-#define  MII_BCM7XX_64CLK_MDIO		BIT(12)
+#define  MII_BCM7XXX_64CLK_MDIO		BIT(12)
 #define MII_BCM7XXX_TEST		0x1f
 #define  MII_BCM7XXX_SHD_MODE_2		BIT(2)
 
@@ -247,7 +247,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	int ret;
 
 	/* Enable 64 clock MDIO */
-	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
 
 	/* Workaround only required for 100Mbits/sec capable PHYs */
@@ -326,50 +326,32 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
 	.resume		= bcm7xxx_28nm_resume,				\
 }
 
+#define BCM7XXX_40NM_EPHY(_oui, _name)					\
+{									\
+	.phy_id         = (_oui),					\
+	.phy_id_mask    = 0xfffffff0,					\
+	.name           = _name,					\
+	.features       = PHY_BASIC_FEATURES |				\
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,	\
+	.flags          = PHY_IS_INTERNAL,				\
+	.config_init    = bcm7xxx_config_init,				\
+	.config_aneg    = genphy_config_aneg,				\
+	.read_status    = genphy_read_status,				\
+	.suspend        = bcm7xxx_suspend,				\
+	.resume         = bcm7xxx_config_init,				\
+}
+
 static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+	BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
+	BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
+	BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
 {
-	.phy_id         = PHY_ID_BCM7425,
-	.phy_id_mask    = 0xfffffff0,
-	.name           = "Broadcom BCM7425",
-	.features       = PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags          = PHY_IS_INTERNAL,
-	.config_init    = bcm7xxx_config_init,
-	.config_aneg    = genphy_config_aneg,
-	.read_status    = genphy_read_status,
-	.suspend        = bcm7xxx_suspend,
-	.resume         = bcm7xxx_config_init,
-}, {
-	.phy_id         = PHY_ID_BCM7429,
-	.phy_id_mask    = 0xfffffff0,
-	.name           = "Broadcom BCM7429",
-	.features       = PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags          = PHY_IS_INTERNAL,
-	.config_init    = bcm7xxx_config_init,
-	.config_aneg    = genphy_config_aneg,
-	.read_status    = genphy_read_status,
-	.suspend        = bcm7xxx_suspend,
-	.resume         = bcm7xxx_config_init,
-}, {
-	.phy_id         = PHY_ID_BCM7435,
-	.phy_id_mask    = 0xfffffff0,
-	.name           = "Broadcom BCM7435",
-	.features       = PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags          = PHY_IS_INTERNAL,
-	.config_init    = bcm7xxx_config_init,
-	.config_aneg    = genphy_config_aneg,
-	.read_status    = genphy_read_status,
-	.suspend        = bcm7xxx_suspend,
-	.resume         = bcm7xxx_config_init,
-}, {
 	.phy_id		= PHY_BCM_OUI_4,
 	.phy_id_mask	= 0xffff0000,
 	.name		= "Broadcom BCM7XXX 40nm",