serial: stm32: Return IRQ_NONE in the ISR if no handling happend

If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.

A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.

Fixes: 48a6092 ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/stm32-usart.c

@@ -861,6 +861,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	u32 sr;
 	unsigned int size;
+	irqreturn_t ret = IRQ_NONE;
 
 	sr = readl_relaxed(port->membase + ofs->isr);
 
@@ -869,11 +870,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	    (sr & USART_SR_TC)) {
 		stm32_usart_tc_interrupt_disable(port);
 		stm32_usart_rs485_rts_disable(port);
+		ret = IRQ_HANDLED;
 	}
 
-	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
+	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) {
 		writel_relaxed(USART_ICR_RTOCF,
 			       port->membase + ofs->icr);
+		ret = IRQ_HANDLED;
+	}
 
 	if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
 		/* Clear wake up flag and disable wake up interrupt */
@@ -882,6 +886,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
 		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
 			pm_wakeup_event(tport->tty->dev, 0);
+		ret = IRQ_HANDLED;
 	}
 
 	/*
@@ -896,13 +901,15 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 			uart_unlock_and_check_sysrq(port);
 			if (size)
 				tty_flip_buffer_push(tport);
+			ret = IRQ_HANDLED;
 		}
 	}
 
 	if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) {
 		uart_port_lock(port);
 		stm32_usart_transmit_chars(port);
 		uart_port_unlock(port);
+		ret = IRQ_HANDLED;
 	}
 
 	/* Receiver timeout irq for DMA RX */
@@ -912,9 +919,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		uart_unlock_and_check_sysrq(port);
 		if (size)
 			tty_flip_buffer_push(tport);
+		ret = IRQ_HANDLED;
 	}
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)