Merge commit 'v3.0' into x86/cpu

Documentation/filesystems/nilfs2.txt

@@ -40,7 +40,6 @@ Features which NILFS2 does not support yet:
 	- POSIX ACLs
 	- quotas
 	- fsck
-	- resize
 	- defragmentation
 
 Mount options

Documentation/networking/ip-sysctl.txt

@@ -346,7 +346,7 @@ tcp_orphan_retries - INTEGER
 	when RTO retransmissions remain unacknowledged.
 	See tcp_retries2 for more details.
 
-	The default value is 7.
+	The default value is 8.
 	If your machine is a loaded WEB server,
 	you should think about lowering this value, such sockets
 	may consume significant resources. Cf. tcp_max_orphans.

Documentation/x86/boot.txt

@@ -674,7 +674,7 @@ Protocol:	2.10+
 
 Field name:	init_size
 Type:		read
-Offset/size:	0x25c/4
+Offset/size:	0x260/4
 
   This field indicates the amount of linear contiguous memory starting
   at the kernel runtime start address that the kernel needs before it

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

arch/arm/mach-davinci/board-dm365-evm.c

@@ -520,7 +520,7 @@ static void __init evm_init_cpld(void)
 	 */
 	if (have_imager()) {
 		label = "HD imager";
-		mux |= 1;
+		mux |= 2;
 
 		/* externally mux MMC1/ENET/AIC33 to imager */
 		mux |= BIT(6) | BIT(5) | BIT(3);
@@ -540,7 +540,7 @@ static void __init evm_init_cpld(void)
 		resets &= ~BIT(1);
 
 		if (have_tvp7002()) {
-			mux |= 2;
+			mux |= 1;
 			resets &= ~BIT(2);
 			label = "tvp7002 HD";
 		} else {

arch/arm/mach-davinci/gpio.c

@@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	struct davinci_gpio_regs __iomem *g;
 	u32 mask = 0xffff;
+	struct davinci_gpio_controller *d;
 
-	g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+	g = (struct davinci_gpio_regs __iomem *)d->regs;
 
 	/* we only care about one bank */
 	if (irq & 1)
@@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		if (!status)
 			break;
 		__raw_writel(status, &g->intstat);
-		if (irq & 1)
-			status >>= 16;
 
 		/* now demux them to the right lowlevel handler */
-		n = (int)irq_get_handler_data(irq);
+		n = d->irq_base;
+		if (irq & 1) {
+			n += 16;
+			status >>= 16;
+		}
+
 		while (status) {
 			res = ffs(status);
 			n += res;
@@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void)
 
 		/* set up all irqs in this bank */
 		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-		irq_set_handler_data(bank_irq, (__force void *)g);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			irq_set_chip(irq, &gpio_irqchip);

arch/arm/mach-davinci/irq.c

@@ -52,8 +52,14 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
+	if (!gc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+		       __func__, irq_start);
+		return;
+	}
+
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 

arch/arm/mach-ixp4xx/common.c

@@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void)
 /*
  * clocksource
  */
+
+static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
+{
+	return *IXP4XX_OSTS;
+}
+
 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
 	init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
 
-	clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
-			clocksource_mmio_readl_up);
+	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
+			ixp4xx_clocksource_read);
 }
 
 /*

arch/arm/mach-mmp/pxa168.c

@@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */

arch/arm/mach-mmp/pxa910.c

@@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
 
 /* device and clock bindings */

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void)
 		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
 		    (GPDR(i) & GPIO_bit(i))) {
 			if (GPLR(i) & GPIO_bit(i))
-				PGSR(i) |= GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
 			else
-				PGSR(i) &= ~GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
 		}
 	}
 

arch/arm/mach-pxa/raumfeld.c

@@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
 	.xres		= 480,
 	.yres		= 272,
 	.bpp		= 16,
-	.hsync_len	= 4,
+	.hsync_len	= 41,
 	.left_margin	= 2,
 	.right_margin	= 1,
-	.vsync_len	= 1,
+	.vsync_len	= 10,
 	.upper_margin	= 3,
 	.lower_margin	= 1,
 	.sync		= 0,
@@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
-	/* Earlier devices had the backlight regulator controlled
-	 * via PWM, later versions use another controller for that */
-	if ((system_rev & 0xff) < 2) {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	} else
-		platform_device_register(&raumfeld_lt3593_device);
-
 	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
 	else
 		gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
+	msleep(100);
+
 	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
+	/* Hardware revision 2 has the backlight regulator controlled
+	 * by an LT3593, earlier and later devices use PWM for that. */
+	if ((system_rev & 0xff) == 2) {
+		platform_device_register(&raumfeld_lt3593_device);
+	} else {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	}
+
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 	platform_device_register(&pxa3xx_device_gcu);
 }
 
@@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = {
 
 #define SPI_AK4104	\
 {			\
-	.modalias	= "ak4104",	\
-	.max_speed_hz	= 10000,	\
-	.bus_num	= 0,		\
-	.chip_select	= 0,		\
+	.modalias	= "ak4104-codec",	\
+	.max_speed_hz	= 10000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 0,			\
 	.controller_data = (void *) GPIO_SPDIF_CS,	\
 }
 

arch/arm/mach-s3c64xx/dma.c

@@ -113,7 +113,7 @@ static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
 	return chan;
 }
 
-int s3c2410_dma_config(unsigned int channel, int xferunit)
+int s3c2410_dma_config(enum dma_ch channel, int xferunit)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
 	return 0;
 }
 
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  *
  */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -415,7 +415,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
@@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel,
 EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 
-int s3c2410_dma_getposition(unsigned int channel,
+int s3c2410_dma_getposition(enum dma_ch channel,
 			    dma_addr_t *src, dma_addr_t *dst)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
 			struct s3c2410_dma_client *client,
 			void *dev)
 {
@@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;

arch/arm/plat-orion/gpio.c

@@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
 	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
 	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_clr_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = gpio_irq_set_type;

arch/arm/plat-pxa/gpio.c

@@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
 	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
 }
 
-static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
 {
 	return &pxa_gpio_chips[gpio_to_bank(gpio)];
 }
@@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
 	int gpio = irq_to_gpio(d->irq);
 	unsigned long gpdr, mask = GPIO_bit(gpio);
 
-	c = gpio_to_chip(gpio);
+	c = gpio_to_pxachip(gpio);
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
@@ -230,15 +230,15 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 static void pxa_ack_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
 }
 
 static void pxa_mask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 	uint32_t grer, gfer;
 
 	c->irq_mask &= ~GPIO_bit(gpio);
@@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)
 static void pxa_unmask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	c->irq_mask |= GPIO_bit(gpio);
 	update_edge_detect(c);