Merge tag 'renesas-dt-for-v4.18' of https://git.kernel.org/pub/scm/li…

…nux/kernel/git/horms/renesas into next/late

Renesas ARM Based SoC DT Updates for v4.18

* R-Mobile A1 (r8a7740) SoC
  - Describe CEU, IRQC, SYS-DMAC and USB devices
  - Cleanup for consistency with other Renesas SoCs and enhanced maintainability
* RZ/A1H (r7s72100) SoC
  - Describe CEU device
* R-Car Gen2, RZ/G1 and RZ/A1H SoCs
  - Add PMU device nodes
* RZ/A1H (r7s72100) SoC
  - Correct interrupt types
* R-Mobile APE6 (r8a73a4) APE4EVM board and SH-Mobile AG5 (sh73a0) SoC
  - Use generic disable-wp instead of now deprecated
    toshiba,mmc-wrprotect-disable property
* EMMA Mobile EV2 (emev2) and SH-Mobile AG5 (sh73a0) SoCs
  - Add missing interrupt-affinity to PMU
* R-Car H2 (r8a7790) and R-Mobile APE6 (r8a73a4) SoCs
  - Correct mask for GIC PPI interrupts
* R-Car H2 (r8a7790), M2-W (r8a7791), M2-N (r8a7793) and E2 (r8a7794) SoCs
  - Describe FDP1 instances
* R-Car Gen2 and RZ/G1 SoCs
  - Describe watchdog devices
  - For R-Car Gen2 this involves updating the SMP routine side as
    it is changed by a driver updated to allow watchdog device support

* Alt board for R-Car E2 (r8a7794) SoC
* RBoards for -Car Gen2 SoCs and kzm9d board for EMMA Mobile EV2 (emev2) SoC
* iW-RainboW-G23S board for RZ/G1C (r8a77470) SoC
  - Initial SoC and board support
  - Enable EtherAVB
  - Describe all SCIF devices
* Boards for R-Car Gen2 SoCs
  - Enable watchdog support
* Wheat board for V2H (r8a7792) SoC
  - Correct ADV7513 address usage

* tag 'renesas-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (69 commits)
  ARM: dts: r8a7740: Add CEU1
  ARM: dts: r8a7740: Add CEU0
  ARM: dts: r8a7745: Add PMU device node
  ARM: dts: r8a7743: Add PMU device node
  ARM: dts: r8a7794: Add PMU device node
  ARM: dts: r8a7793: Add PMU device node
  ARM: dts: r8a7792: Add PMU device node
  ARM: dts: r8a7791: Add PMU device node
  ARM: dts: r8a7790: Add PMU device nodes
  ARM: dts: r7s72100: Add PMU device node
  ARM: dts: r7s72100: Correct RTC interrupt types
  ARM: dts: r7s72100: Correct watchdog timer interrupt type
  ARM: dts: emev2: Add missing interrupt-affinity to PMU node
  ARM: dts: sh73a0: Add missing interrupt-affinity to PMU node
  ARM: dts: r8a73a4: Correct mask for GIC PPI interrupts
  ARM: dts: r8a7790: Correct mask for GIC PPI interrupts
  ARM: shmobile: r8a7794: alt: add EEPROM to DTS
  ARM: dts: kzm9d: Drop unnecessary address properties from gpio_keys node
  ARM: dts: silk: Drop unnecessary address properties from vin port node
  ARM: dts: alt: Drop unnecessary address properties from vin port node
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -795,6 +795,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7745-iwg22d-sodimm.dtb \
 	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
 	r8a7745-sk-rzg1e.dtb \
+	r8a77470-iwg23s-sbc.dtb \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -34,9 +34,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		one {
 			debounce-interval = <50>;
 			wakeup-source;

arch/arm/boot/dts/emev2.dtsi

@@ -31,13 +31,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <533000000>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -57,6 +57,7 @@
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
 	clocks@e0110000 {