drm/i915: add lpt_pch_enable

For now it's just a fork of ironlake_pch_enable. The next commits will
change this.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -3168,6 +3168,115 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 	intel_enable_transcoder(dev_priv, pipe);
 }
 
+static void lpt_pch_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	assert_transcoder_disabled(dev_priv, pipe);
+
+	/* Write the TU size bits before fdi link training, so that error
+	 * detection works. */
+	I915_WRITE(FDI_RX_TUSIZE1(pipe),
+		   I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
+
+	/* For PCH output, training FDI link */
+	dev_priv->display.fdi_link_train(crtc);
+
+	/* XXX: pch pll's can be enabled any time before we enable the PCH
+	 * transcoder, and we actually should do this to not upset any PCH
+	 * transcoder that already use the clock when we share it.
+	 *
+	 * Note that enable_pch_pll tries to do the right thing, but get_pch_pll
+	 * unconditionally resets the pll - we need that to have the right LVDS
+	 * enable sequence. */
+	intel_enable_pch_pll(intel_crtc);
+
+	if (HAS_PCH_LPT(dev)) {
+		DRM_DEBUG_KMS("LPT detected: programming iCLKIP\n");
+		lpt_program_iclkip(crtc);
+	} else if (HAS_PCH_CPT(dev)) {
+		u32 sel;
+
+		temp = I915_READ(PCH_DPLL_SEL);
+		switch (pipe) {
+		default:
+		case 0:
+			temp |= TRANSA_DPLL_ENABLE;
+			sel = TRANSA_DPLLB_SEL;
+			break;
+		case 1:
+			temp |= TRANSB_DPLL_ENABLE;
+			sel = TRANSB_DPLLB_SEL;
+			break;
+		case 2:
+			temp |= TRANSC_DPLL_ENABLE;
+			sel = TRANSC_DPLLB_SEL;
+			break;
+		}
+		if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
+			temp |= sel;
+		else
+			temp &= ~sel;
+		I915_WRITE(PCH_DPLL_SEL, temp);
+	}
+
+	/* set transcoder timing, panel must allow it */
+	assert_panel_unlocked(dev_priv, pipe);
+	I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
+	I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
+	I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));
+
+	I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
+	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
+	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
+	I915_WRITE(TRANS_VSYNCSHIFT(pipe),  I915_READ(VSYNCSHIFT(pipe)));
+
+	if (!IS_HASWELL(dev))
+		intel_fdi_normal_train(crtc);
+
+	/* For PCH DP, enable TRANS_DP_CTL */
+	if (HAS_PCH_CPT(dev) &&
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		reg = TRANS_DP_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(TRANS_DP_PORT_SEL_MASK |
+			  TRANS_DP_SYNC_MASK |
+			  TRANS_DP_BPC_MASK);
+		temp |= (TRANS_DP_OUTPUT_ENABLE |
+			 TRANS_DP_ENH_FRAMING);
+		temp |= bpc << 9; /* same format but at 11:9 */
+
+		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
+
+		switch (intel_trans_dp_port_sel(crtc)) {
+		case PCH_DP_B:
+			temp |= TRANS_DP_PORT_SEL_B;
+			break;
+		case PCH_DP_C:
+			temp |= TRANS_DP_PORT_SEL_C;
+			break;
+		case PCH_DP_D:
+			temp |= TRANS_DP_PORT_SEL_D;
+			break;
+		default:
+			BUG();
+		}
+
+		I915_WRITE(reg, temp);
+	}
+
+	intel_enable_transcoder(dev_priv, pipe);
+}
+
 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
 {
 	struct intel_pch_pll *pll = intel_crtc->pch_pll;
@@ -3414,7 +3523,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_enable_plane(dev_priv, plane, pipe);
 
 	if (is_pch_port)
-		ironlake_pch_enable(crtc);
+		lpt_pch_enable(crtc);
 
 	mutex_lock(&dev->struct_mutex);
 	intel_update_fbc(dev);