Merge branch 'dynamic_sg' into rdma.git for-next

From Maor Gottlieb says: ==================== This series extends __sg_alloc_table_from_pages to allow chaining of new pages to an already initialized SG table. This allows for drivers to utilize the optimization of merging contiguous pages without a need to pre allocate all the pages and hold them in a very large temporary buffer prior to the call to SG table initialization. The last patch changes the Infiniband core to use the new API. It removes duplicate functionality from the code and benefits from the optimization of allocating dynamic SG table from pages. In huge pages system of 2MB page size, without this change, the SG table would contain x512 SG entries. ==================== * branch 'dynamic_sg': RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test
mariux64 · Oct 16, 2020 · 16e7483 · 16e7483
2 parents bf6a476 + 0c16d96
commit 16e7483
Show file tree

Hide file tree

Showing 577 changed files with 5,626 additions and 3,494 deletions.
diff --git a/.mailmap b/.mailmap
@@ -169,6 +169,10 @@ Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
 Kamil Konieczny <k.konieczny@samsung.com> <k.konieczny@partner.samsung.com>
 Kay Sievers <kay.sievers@vrfy.org>
+Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
+Kees Cook <keescook@chromium.org> <keescook@google.com>
+Kees Cook <keescook@chromium.org> <kees@outflux.net>
+Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>

diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
@@ -1324,15 +1324,26 @@ PAGE_SIZE multiple when read back.
 	  pgmajfault
 		Number of major page faults incurred
 
-	  workingset_refault
-		Number of refaults of previously evicted pages
+	  workingset_refault_anon
+		Number of refaults of previously evicted anonymous pages.
 
-	  workingset_activate
-		Number of refaulted pages that were immediately activated
+	  workingset_refault_file
+		Number of refaults of previously evicted file pages.
 
-	  workingset_restore
-		Number of restored pages which have been detected as an active
-		workingset before they got reclaimed.
+	  workingset_activate_anon
+		Number of refaulted anonymous pages that were immediately
+		activated.
+
+	  workingset_activate_file
+		Number of refaulted file pages that were immediately activated.
+
+	  workingset_restore_anon
+		Number of restored anonymous pages which have been detected as
+		an active workingset before they got reclaimed.
+
+	  workingset_restore_file
+		Number of restored file pages which have been detected as an
+		active workingset before they got reclaimed.
 
 	  workingset_nodereclaim
 		Number of times a shadow node has been reclaimed

diff --git a/Documentation/admin-guide/device-mapper/dm-crypt.rst b/Documentation/admin-guide/device-mapper/dm-crypt.rst
@@ -67,7 +67,7 @@ Parameters::
     the value passed in <key_size>.
 
 <key_type>
-    Either 'logon' or 'user' kernel key type.
+    Either 'logon', 'user' or 'encrypted' kernel key type.
 
 <key_description>
     The kernel keyring key description crypt target should look for
@@ -121,6 +121,14 @@ submit_from_crypt_cpus
     thread because it benefits CFQ to have writes submitted using the
     same context.
 
+no_read_workqueue
+    Bypass dm-crypt internal workqueue and process read requests synchronously.
+
+no_write_workqueue
+    Bypass dm-crypt internal workqueue and process write requests synchronously.
+    This option is automatically enabled for host-managed zoned block devices
+    (e.g. host-managed SMR hard-disks).
+
 integrity:<bytes>:<type>
     The device requires additional <bytes> metadata per-sector stored
     in per-bio integrity structure. This metadata must by provided

diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
@@ -690,7 +690,7 @@ which of the two parameters is added to the kernel command line.  In the
 instruction of the CPUs (which, as a rule, suspends the execution of the program
 and causes the hardware to attempt to enter the shallowest available idle state)
 for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a
-more or less ``lightweight'' sequence of instructions in a tight loop.  [Note
+more or less "lightweight" sequence of instructions in a tight loop.  [Note
 that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle
 CPUs from saving almost any energy at all may not be the only effect of it.
 For example, on Intel hardware it effectively prevents CPUs from using

diff --git a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
@@ -182,9 +182,6 @@ in the order of reservations, but only after all previous records where
 already committed. It is thus possible for slow producers to temporarily hold
 off submitted records, that were reserved later.
 
-Reservation/commit/consumer protocol is verified by litmus tests in
-Documentation/litmus_tests/bpf-rb/_.
-
 One interesting implementation bit, that significantly simplifies (and thus
 speeds up as well) implementation of both producers and consumers is how data
 area is mapped twice contiguously back-to-back in the virtual memory. This
@@ -200,7 +197,7 @@ a self-pacing notifications of new data being availability.
 being available after commit only if consumer has already caught up right up to
 the record being committed. If not, consumer still has to catch up and thus
 will see new data anyways without needing an extra poll notification.
-Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c_) show that
+Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c) show that
 this allows to achieve a very high throughput without having to resort to
 tricks like "notify only every Nth sample", which are necessary with perf
 buffer. For extreme cases, when BPF program wants more manual control of

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -23,7 +23,7 @@ properties:
   compatible:
     items:
       - const: raspberrypi,bcm2835-firmware
-      - const: simple-bus
+      - const: simple-mfd
 
   mboxes:
     $ref: '/schemas/types.yaml#/definitions/phandle'
@@ -57,7 +57,7 @@ required:
 examples:
   - |
     firmware {
-        compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
         mboxes = <&mailbox>;
 
         firmware_clocks: clocks {

diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -67,7 +67,7 @@ examples:
 
     main_crypto: crypto@4e00000 {
         compatible = "ti,j721-sa2ul";
-        reg = <0x0 0x4e00000 0x0 0x1200>;
+        reg = <0x4e00000 0x1200>;
         power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
         dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
                <&main_udmap 0x4001>;

diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -145,10 +145,10 @@ examples:
 
     display@fd4a0000 {
         compatible = "xlnx,zynqmp-dpsub-1.7";
-        reg = <0x0 0xfd4a0000 0x0 0x1000>,
-              <0x0 0xfd4aa000 0x0 0x1000>,
-              <0x0 0xfd4ab000 0x0 0x1000>,
-              <0x0 0xfd4ac000 0x0 0x1000>;
+        reg = <0xfd4a0000 0x1000>,
+              <0xfd4aa000 0x1000>,
+              <0xfd4ab000 0x1000>,
+              <0xfd4ac000 0x1000>;
         reg-names = "dp", "blend", "av_buf", "aud";
         interrupts = <0 119 4>;
         interrupt-parent = <&gic>;

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -57,7 +57,7 @@ examples:
 
     dma: dma-controller@fd4c0000 {
       compatible = "xlnx,zynqmp-dpdma";
-      reg = <0x0 0xfd4c0000 0x0 0x1000>;
+      reg = <0xfd4c0000 0x1000>;
       interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
       interrupt-parent = <&gic>;
       clocks = <&dpdma_clk>;

diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
@@ -20,8 +20,9 @@ Required properties:
 - gpio-controller : Marks the device node as a GPIO controller
 - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
 - interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of GPIO lines, see gpio.txt
-  (should be multiple of 8, up to 80 pins)
+- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
+  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
+  output. Up to 80 pins, must be a multiple of 8.
 - clocks : A phandle to the APB clock for SGPM clock division
 - bus-frequency : SGPM CLK frequency
 

diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -30,7 +30,7 @@ properties:
     const: 0
 
 patternProperties:
-  "^multi-led[0-9a-f]$":
+  "^multi-led@[0-9a-b]$":
     type: object
     allOf:
       - $ref: leds-class-multicolor.yaml#

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: |
+  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
+  active array size of 3864H x 2202V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
+  Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    const: 0x1a
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  vana-supply:
+    description: Sensor 2.8 V analog supply.
+    maxItems: 1
+
+  vdig-supply:
+    description: Sensor 1.8 V digital core supply.
+    maxItems: 1
+
+  vddl-supply:
+    description: Sensor digital IO 1.2 V supply.
+    maxItems: 1
+
+  port:
+    type: object
+    description: Output video port. See ../video-interfaces.txt.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
@@ -22,7 +22,7 @@
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |
-    |     powerpc: |  ok  |
+    |     powerpc: | TODO |
     |       riscv: |  ok  |
     |        s390: |  ok  |
     |          sh: | TODO |

diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
@@ -39,10 +39,10 @@ which can help simplify cross compiling. ::
 	ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
 
 ``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
-``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
+``CROSS_COMPILE`` is used to set a command line flag: ``--target=<triple>``. For
 example: ::
 
-	clang --target aarch64-linux-gnu foo.c
+	clang --target=aarch64-linux-gnu foo.c
 
 LLVM Utilities
 --------------

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
@@ -206,6 +206,7 @@ Userspace to kernel:
   ``ETHTOOL_MSG_TSINFO_GET``		get timestamping info
   ``ETHTOOL_MSG_CABLE_TEST_ACT``        action start cable test
   ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``    action start raw TDR cable test
+  ``ETHTOOL_MSG_TUNNEL_INFO_GET``       get tunnel offload info
   ===================================== ================================
 
 Kernel to userspace:
@@ -239,6 +240,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_TSINFO_GET_REPLY``	timestamping info
   ``ETHTOOL_MSG_CABLE_TEST_NTF``        Cable test results
   ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF``    Cable test TDR results
+  ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
   ===================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1363,4 +1365,5 @@ are netlink only.
   ``ETHTOOL_SFECPARAM``               n/a
   n/a                                 ''ETHTOOL_MSG_CABLE_TEST_ACT''
   n/a                                 ''ETHTOOL_MSG_CABLE_TEST_TDR_ACT''
+  n/a                                 ``ETHTOOL_MSG_TUNNEL_INFO_GET``
   =================================== =====================================
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -701,23 +701,6 @@ Memory Consistency Flags
     :stub-columns: 0
     :widths:       3 1 4
 
-    * .. _`V4L2-FLAG-MEMORY-NON-CONSISTENT`:
-
-      - ``V4L2_FLAG_MEMORY_NON_CONSISTENT``
-      - 0x00000001
-      - A buffer is allocated either in consistent (it will be automatically
-	coherent between the CPU and the bus) or non-consistent memory. The
-	latter can provide performance gains, for instance the CPU cache
-	sync/flush operations can be avoided if the buffer is accessed by the
-	corresponding device only and the CPU does not read/write to/from that
-	buffer. However, this requires extra care from the driver -- it must
-	guarantee memory consistency by issuing a cache flush/sync when
-	consistency is needed. If this flag is set V4L2 will attempt to
-	allocate the buffer in non-consistent memory. The flag takes effect
-	only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the
-	queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
-	<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
-
 .. c:type:: v4l2_memory
 
 enum v4l2_memory

diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -120,13 +120,9 @@ than the number requested.
 	If you want to just query the capabilities without making any
 	other changes, then set ``count`` to 0, ``memory`` to
 	``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
 
     * - __u32
-      - ``reserved``\ [6]
+      - ``reserved``\ [7]
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 

diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -112,17 +112,10 @@ aborting or finishing any DMA in progress, an implicit
 	``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
 	free any previously allocated buffers, so this is typically something
 	that will be done at the start of the application.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
     * - __u32
       - ``reserved``\ [1]
-      - Kept for backwards compatibility. Use ``flags`` instead.
-    * - }
-      -
+      - A place holder for future extensions. Drivers and applications
+	must set the array to zero.
 
 .. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
 
@@ -169,7 +162,6 @@ aborting or finishing any DMA in progress, an implicit
       - This capability is set by the driver to indicate that the queue supports
         cache and memory management hints. However, it's only valid when the
         queue is used for :ref:`memory mapping <mmap>` streaming I/O. See
-        :ref:`V4L2_FLAG_MEMORY_NON_CONSISTENT <V4L2-FLAG-MEMORY-NON-CONSISTENT>`,
         :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
         :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.