Merge branch 'linus' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.clang-format

@@ -78,6 +78,8 @@ ForEachMacros:
   - 'ata_qc_for_each_with_internal'
   - 'ax25_for_each'
   - 'ax25_uid_for_each'
+  - '__bio_for_each_bvec'
+  - 'bio_for_each_bvec'
   - 'bio_for_each_integrity_vec'
   - '__bio_for_each_segment'
   - 'bio_for_each_segment'
@@ -118,10 +120,12 @@ ForEachMacros:
   - 'drm_for_each_legacy_plane'
   - 'drm_for_each_plane'
   - 'drm_for_each_plane_mask'
+  - 'drm_for_each_privobj'
   - 'drm_mm_for_each_hole'
   - 'drm_mm_for_each_node'
   - 'drm_mm_for_each_node_in_range'
   - 'drm_mm_for_each_node_safe'
+  - 'flow_action_for_each'
   - 'for_each_active_drhd_unit'
   - 'for_each_active_iommu'
   - 'for_each_available_child_of_node'
@@ -158,6 +162,9 @@ ForEachMacros:
   - 'for_each_dss_dev'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
+  - 'for_each_element'
+  - 'for_each_element_extid'
+  - 'for_each_element_id'
   - 'for_each_endpoint_of_node'
   - 'for_each_evictable_lru'
   - 'for_each_fib6_node_rt_rcu'
@@ -195,6 +202,7 @@ ForEachMacros:
   - 'for_each_net_rcu'
   - 'for_each_new_connector_in_state'
   - 'for_each_new_crtc_in_state'
+  - 'for_each_new_mst_mgr_in_state'
   - 'for_each_new_plane_in_state'
   - 'for_each_new_private_obj_in_state'
   - 'for_each_node'
@@ -210,8 +218,10 @@ ForEachMacros:
   - 'for_each_of_pci_range'
   - 'for_each_old_connector_in_state'
   - 'for_each_old_crtc_in_state'
+  - 'for_each_old_mst_mgr_in_state'
   - 'for_each_oldnew_connector_in_state'
   - 'for_each_oldnew_crtc_in_state'
+  - 'for_each_oldnew_mst_mgr_in_state'
   - 'for_each_oldnew_plane_in_state'
   - 'for_each_oldnew_plane_in_state_reverse'
   - 'for_each_oldnew_private_obj_in_state'
@@ -243,6 +253,9 @@ ForEachMacros:
   - 'for_each_sg_dma_page'
   - 'for_each_sg_page'
   - 'for_each_sibling_event'
+  - 'for_each_subelement'
+  - 'for_each_subelement_extid'
+  - 'for_each_subelement_id'
   - '__for_each_thread'
   - 'for_each_thread'
   - 'for_each_zone'
@@ -252,6 +265,8 @@ ForEachMacros:
   - 'fwnode_for_each_child_node'
   - 'fwnode_graph_for_each_endpoint'
   - 'gadget_for_each_ep'
+  - 'genradix_for_each'
+  - 'genradix_for_each_from'
   - 'hash_for_each'
   - 'hash_for_each_possible'
   - 'hash_for_each_possible_rcu'
@@ -293,7 +308,11 @@ ForEachMacros:
   - 'key_for_each'
   - 'key_for_each_safe'
   - 'klp_for_each_func'
+  - 'klp_for_each_func_safe'
+  - 'klp_for_each_func_static'
   - 'klp_for_each_object'
+  - 'klp_for_each_object_safe'
+  - 'klp_for_each_object_static'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -324,6 +343,8 @@ ForEachMacros:
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
+  - 'mp_bvec_for_each_page'
+  - 'mp_bvec_for_each_segment'
   - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
@@ -375,6 +396,7 @@ ForEachMacros:
   - 'rht_for_each_rcu'
   - 'rht_for_each_rcu_continue'
   - '__rq_for_each_bio'
+  - 'rq_for_each_bvec'
   - 'rq_for_each_segment'
   - 'scsi_for_each_prot_sg'
   - 'scsi_for_each_sg'
@@ -410,6 +432,8 @@ ForEachMacros:
   - 'v4l2_m2m_for_each_src_buf_safe'
   - 'virtio_device_for_each_vq'
   - 'xa_for_each'
+  - 'xa_for_each_marked'
+  - 'xa_for_each_start'
   - 'xas_for_each'
   - 'xas_for_each_conflict'
   - 'xas_for_each_marked'

.mailmap

@@ -156,6 +156,8 @@ Morten Welinder <welinder@darter.rentec.com>
 Morten Welinder <welinder@troll.com>
 Mythri P K <mythripk@ti.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
+Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org>
+Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
 Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>

Documentation/accounting/psi.txt

@@ -56,12 +56,12 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
-The ratios are tracked as recent trends over ten, sixty, and three
-hundred second windows, which gives insight into short term events as
-well as medium and long term trends. The total absolute stall time is
-tracked and exported as well, to allow detection of latency spikes
-which wouldn't necessarily make a dent in the time averages, or to
-average trends over custom time frames.
+The ratios (in %) are tracked as recent trends over ten, sixty, and
+three hundred second windows, which gives insight into short term events
+as well as medium and long term trends. The total absolute stall time
+(in us) is tracked and exported as well, to allow detection of latency
+spikes which wouldn't necessarily make a dent in the time averages,
+or to average trends over custom time frames.
 
 Cgroup2 interface
 =================

Documentation/bpf/btf.rst

@@ -148,16 +148,16 @@ The ``btf_type.size * 8`` must be equal to or greater than ``BTF_INT_BITS()``
 for the type. The maximum value of ``BTF_INT_BITS()`` is 128.
 
 The ``BTF_INT_OFFSET()`` specifies the starting bit offset to calculate values
-for this int. For example, a bitfield struct member has: * btf member bit
-offset 100 from the start of the structure, * btf member pointing to an int
-type, * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4``
+for this int. For example, a bitfield struct member has:
+ * btf member bit offset 100 from the start of the structure,
+ * btf member pointing to an int type,
+ * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4``
 
 Then in the struct memory layout, this member will occupy ``4`` bits starting
 from bits ``100 + 2 = 102``.
 
 Alternatively, the bitfield struct member can be the following to access the
 same bits as the above:
-
  * btf member bit offset 102,
  * btf member pointing to an int type,
  * the int type has ``BTF_INT_OFFSET() = 0`` and ``BTF_INT_BITS() = 4``

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -228,7 +228,7 @@ patternProperties:
                 - renesas,r9a06g032-smp
                 - rockchip,rk3036-smp
                 - rockchip,rk3066-smp
-		- socionext,milbeaut-m10v-smp
+                - socionext,milbeaut-m10v-smp
                 - ste,dbx500-smp
 
       cpu-release-addr:

Documentation/devicetree/bindings/hwmon/adc128d818.txt

@@ -26,13 +26,13 @@ Required node properties:
 
 Optional node properties:
 
- - ti,mode:     Operation mode (see above).
+ - ti,mode:     Operation mode (u8) (see above).
 
 
 Example (operation mode 2):
 
 	adc128d818@1d {
 		compatible = "ti,adc128d818";
 		reg = <0x1d>;
-		ti,mode = <2>;
+		ti,mode = /bits/ 8 <2>;
 	};

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -20,6 +20,8 @@ Required properties:
 Optional properties:
 - phy-handle: See ethernet.txt file in the same directory.
               If absent, davinci_emac driver defaults to 100/FULL.
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
 - ti,davinci-rmii-en: 1 byte, 1 means use RMII
 - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
 

Documentation/devicetree/bindings/net/ethernet.txt

@@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt.
   the boot program; should be used in cases where the MAC address assigned to
   the device by the boot program is different from the "local-mac-address"
   property;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used;
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in the Devicetree
   Specification).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
-  * "internal"
+  * "internal" (Internal means there is not a standard bus between the MAC and
+     the PHY, something proprietary is being used to embed the PHY in the MAC.)
   * "mii"
   * "gmii"
   * "sgmii"

Documentation/devicetree/bindings/net/macb.txt

@@ -26,6 +26,10 @@ Required properties:
 	Optional elements: 'tsu_clk'
 - clocks: Phandles to input clocks.
 
+Optional properties:
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
+
 Optional properties for PHY child node:
 - reset-gpios : Should specify the gpio for phy reset
 - magic-packet : If present, indicates that the hardware supports waking

Documentation/driver-api/usb/power-management.rst

@@ -370,11 +370,15 @@ autosuspend the interface's device.  When the usage counter is = 0
 then the interface is considered to be idle, and the kernel may
 autosuspend the device.
 
-Drivers need not be concerned about balancing changes to the usage
-counter; the USB core will undo any remaining "get"s when a driver
-is unbound from its interface.  As a corollary, drivers must not call
-any of the ``usb_autopm_*`` functions after their ``disconnect``
-routine has returned.
+Drivers must be careful to balance their overall changes to the usage
+counter.  Unbalanced "get"s will remain in effect when a driver is
+unbound from its interface, preventing the device from going into
+runtime suspend should the interface be bound to a driver again.  On
+the other hand, drivers are allowed to achieve this balance by calling
+the ``usb_autopm_*`` functions even after their ``disconnect`` routine
+has returned -- say from within a work-queue routine -- provided they
+retain an active reference to the interface (via ``usb_get_intf`` and
+``usb_put_intf``).
 
 Drivers using the async routines are responsible for their own
 synchronization and mutual exclusion.

Documentation/lzo.txt

@@ -102,9 +102,11 @@ Byte sequences
                 dictionary which is empty, and that it will always be
                 invalid at this place.
 
-      17      : bitstream version. If the first byte is 17, the next byte
-                gives the bitstream version (version 1 only). If the first byte
-                is not 17, the bitstream version is 0.
+      17      : bitstream version. If the first byte is 17, and compressed
+                stream length is at least 5 bytes (length of shortest possible
+                versioned bitstream), the next byte gives the bitstream version
+                (version 1 only).
+                Otherwise, the bitstream version is 0.
 
       18..21  : copy 0..3 literals
                 state = (byte - 17) = 0..3  [ copy <state> literals ]

Documentation/media/uapi/rc/rc-tables.rst

@@ -623,15 +623,15 @@ the remote via /dev/input/event devices.
 
     -  .. row 78
 
-       -  ``KEY_SCREEN``
+       -  ``KEY_ASPECT_RATIO``
 
        -  Select screen aspect ratio
 
        -  4:3 16:9 SELECT
 
     -  .. row 79
 
-       -  ``KEY_ZOOM``
+       -  ``KEY_FULL_SCREEN``
 
        -  Put device into zoom/full screen mode