libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs

Richard Jones has reported that using med_power_with_dipm on a T450s
with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is
causing the machine to hang.

Switching the LPM to max_performance fixes this, so it seems that
this Sandisk SSD does not handle LPM well.

Note in the past there have been bug-reports about the following
Sandisk models not working with min_power, so we may need to extend
the quirk list in the future: name - firmware
Sandisk SD6SB2M512G1022I   - X210400
Sandisk SD6PP4M-256G-1006  - A200906

Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

drivers/ata/libata-core.c

@@ -4552,6 +4552,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* This specific Samsung model/firmware-rev does not handle LPM well */
 	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
 
+	/* Sandisk devices which are known to not handle LPM well */
+	{ "SanDisk SD7UB3Q*G1001",	NULL,	ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },