Merge tag 'for-linus-2023100502' of git://git.kernel.org/pub/scm/linu…

…x/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - power management fix for intel-ish-hid (Srinivas Pandruvada)

 - power management fix for hid-nintendo (Martino Fontana)

 - error handling fixes for nvidia-shield (Christophe JAILLET)

 - memory leak fix for hid-sony (Christophe JAILLET)

 - fix for slab out-of-bound write in hid-holtek (Ma Ke)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2023100502' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Add quirk to ignore the touchscreen battery on HP ENVY 15-eu0556ng
  HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit
  HID: sony: remove duplicate NULL check before calling usb_free_urb()
  HID: nintendo: reinitialize USB Pro Controller after resuming from suspend
  HID: nvidia-shield: Fix some missing function calls() in the probe error handling path
  HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe error handling path
  HID: multitouch: Add required quirk for Synaptics 0xcd7e device
  HID: nvidia-shield: Select POWER_SUPPLY Kconfig option
  HID: holtek: fix slab-out-of-bounds Write in holtek_kbd_input_event
  HID: nvidia-shield: add LEDS_CLASS dependency
  HID: logitech-hidpp: Add Bluetooth ID for the Logitech M720 Triathlon mouse
  HID: steelseries: Fix signedness bug in steelseries_headset_arctis_1_fetch_battery()
  HID: sony: Fix a potential memory leak in sony_probe()

drivers/hid/Kconfig

@@ -799,6 +799,8 @@ config HID_NVIDIA_SHIELD
 	tristate "NVIDIA SHIELD devices"
 	depends on USB_HID
 	depends on BT_HIDP
+	depends on LEDS_CLASS
+	select POWER_SUPPLY
 	help
 	  Support for NVIDIA SHIELD accessories.
 

drivers/hid/hid-holtek-kbd.c

@@ -130,6 +130,10 @@ static int holtek_kbd_input_event(struct input_dev *dev, unsigned int type,
 		return -ENODEV;
 
 	boot_hid = usb_get_intfdata(boot_interface);
+	if (list_empty(&boot_hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
 	boot_hid_input = list_first_entry(&boot_hid->inputs,
 		struct hid_input, list);
 

drivers/hid/hid-ids.h

@@ -425,6 +425,7 @@
 #define I2C_DEVICE_ID_HP_SPECTRE_X360_13T_AW100	0x29F5
 #define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V1	0x2BED
 #define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2	0x2BEE
+#define I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG		0x2D02
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061

drivers/hid/hid-input.c

@@ -409,6 +409,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 

drivers/hid/hid-logitech-hidpp.c

@@ -4677,6 +4677,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb008) },
 	{ /* MX Master mouse over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb012) },
+	{ /* M720 Triathlon mouse over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb015) },
 	{ /* MX Ergo trackball over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01d) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e) },

drivers/hid/hid-multitouch.c

@@ -2144,6 +2144,10 @@ static const struct hid_device_id mt_devices[] = {
 			USB_DEVICE_ID_MTP_STM)},
 
 	/* Synaptics devices */
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_SYNAPTICS, 0xcd7e) },
+
 	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_SYNAPTICS, 0xce08) },

drivers/hid/hid-nintendo.c

@@ -2088,7 +2088,9 @@ static int joycon_read_info(struct joycon_ctlr *ctlr)
 	struct joycon_input_report *report;
 
 	req.subcmd_id = JC_SUBCMD_REQ_DEV_INFO;
+	mutex_lock(&ctlr->output_mutex);
 	ret = joycon_send_subcmd(ctlr, &req, 0, HZ);
+	mutex_unlock(&ctlr->output_mutex);
 	if (ret) {
 		hid_err(ctlr->hdev, "Failed to get joycon info; ret=%d\n", ret);
 		return ret;
@@ -2117,6 +2119,85 @@ static int joycon_read_info(struct joycon_ctlr *ctlr)
 	return 0;
 }
 
+static int joycon_init(struct hid_device *hdev)
+{
+	struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
+	int ret = 0;
+
+	mutex_lock(&ctlr->output_mutex);
+	/* if handshake command fails, assume ble pro controller */
+	if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) &&
+	    !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) {
+		hid_dbg(hdev, "detected USB controller\n");
+		/* set baudrate for improved latency */
+		ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ);
+		if (ret) {
+			hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret);
+			goto out_unlock;
+		}
+		/* handshake */
+		ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ);
+		if (ret) {
+			hid_err(hdev, "Failed handshake; ret=%d\n", ret);
+			goto out_unlock;
+		}
+		/*
+		 * Set no timeout (to keep controller in USB mode).
+		 * This doesn't send a response, so ignore the timeout.
+		 */
+		joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10);
+	} else if (jc_type_is_chrggrip(ctlr)) {
+		hid_err(hdev, "Failed charging grip handshake\n");
+		ret = -ETIMEDOUT;
+		goto out_unlock;
+	}
+
+	/* get controller calibration data, and parse it */
+	ret = joycon_request_calibration(ctlr);
+	if (ret) {
+		/*
+		 * We can function with default calibration, but it may be
+		 * inaccurate. Provide a warning, and continue on.
+		 */
+		hid_warn(hdev, "Analog stick positions may be inaccurate\n");
+	}
+
+	/* get IMU calibration data, and parse it */
+	ret = joycon_request_imu_calibration(ctlr);
+	if (ret) {
+		/*
+		 * We can function with default calibration, but it may be
+		 * inaccurate. Provide a warning, and continue on.
+		 */
+		hid_warn(hdev, "Unable to read IMU calibration data\n");
+	}
+
+	/* Set the reporting mode to 0x30, which is the full report mode */
+	ret = joycon_set_report_mode(ctlr);
+	if (ret) {
+		hid_err(hdev, "Failed to set report mode; ret=%d\n", ret);
+		goto out_unlock;
+	}
+
+	/* Enable rumble */
+	ret = joycon_enable_rumble(ctlr);
+	if (ret) {
+		hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret);
+		goto out_unlock;
+	}
+
+	/* Enable the IMU */
+	ret = joycon_enable_imu(ctlr);
+	if (ret) {
+		hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret);
+		goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&ctlr->output_mutex);
+	return ret;
+}
+
 /* Common handler for parsing inputs */
 static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data,
 							      int size)
@@ -2248,85 +2329,19 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 
 	hid_device_io_start(hdev);
 
-	/* Initialize the controller */
-	mutex_lock(&ctlr->output_mutex);
-	/* if handshake command fails, assume ble pro controller */
-	if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) &&
-	    !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) {
-		hid_dbg(hdev, "detected USB controller\n");
-		/* set baudrate for improved latency */
-		ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ);
-		if (ret) {
-			hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret);
-			goto err_mutex;
-		}
-		/* handshake */
-		ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ);
-		if (ret) {
-			hid_err(hdev, "Failed handshake; ret=%d\n", ret);
-			goto err_mutex;
-		}
-		/*
-		 * Set no timeout (to keep controller in USB mode).
-		 * This doesn't send a response, so ignore the timeout.
-		 */
-		joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10);
-	} else if (jc_type_is_chrggrip(ctlr)) {
-		hid_err(hdev, "Failed charging grip handshake\n");
-		ret = -ETIMEDOUT;
-		goto err_mutex;
-	}
-
-	/* get controller calibration data, and parse it */
-	ret = joycon_request_calibration(ctlr);
+	ret = joycon_init(hdev);
 	if (ret) {
-		/*
-		 * We can function with default calibration, but it may be
-		 * inaccurate. Provide a warning, and continue on.
-		 */
-		hid_warn(hdev, "Analog stick positions may be inaccurate\n");
-	}
-
-	/* get IMU calibration data, and parse it */
-	ret = joycon_request_imu_calibration(ctlr);
-	if (ret) {
-		/*
-		 * We can function with default calibration, but it may be
-		 * inaccurate. Provide a warning, and continue on.
-		 */
-		hid_warn(hdev, "Unable to read IMU calibration data\n");
-	}
-
-	/* Set the reporting mode to 0x30, which is the full report mode */
-	ret = joycon_set_report_mode(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to set report mode; ret=%d\n", ret);
-		goto err_mutex;
-	}
-
-	/* Enable rumble */
-	ret = joycon_enable_rumble(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret);
-		goto err_mutex;
-	}
-
-	/* Enable the IMU */
-	ret = joycon_enable_imu(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret);
-		goto err_mutex;
+		hid_err(hdev, "Failed to initialize controller; ret=%d\n", ret);
+		goto err_close;
 	}
 
 	ret = joycon_read_info(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to retrieve controller info; ret=%d\n",
 			ret);
-		goto err_mutex;
+		goto err_close;
 	}
 
-	mutex_unlock(&ctlr->output_mutex);
-
 	/* Initialize the leds */
 	ret = joycon_leds_create(ctlr);
 	if (ret) {
@@ -2352,8 +2367,6 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 	hid_dbg(hdev, "probe - success\n");
 	return 0;
 
-err_mutex:
-	mutex_unlock(&ctlr->output_mutex);
 err_close:
 	hid_hw_close(hdev);
 err_stop:
@@ -2383,6 +2396,20 @@ static void nintendo_hid_remove(struct hid_device *hdev)
 	hid_hw_stop(hdev);
 }
 
+#ifdef CONFIG_PM
+
+static int nintendo_hid_resume(struct hid_device *hdev)
+{
+	int ret = joycon_init(hdev);
+
+	if (ret)
+		hid_err(hdev, "Failed to restore controller after resume");
+
+	return ret;
+}
+
+#endif
+
 static const struct hid_device_id nintendo_hid_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_PROCON) },
@@ -2404,6 +2431,10 @@ static struct hid_driver nintendo_hid_driver = {
 	.probe		= nintendo_hid_probe,
 	.remove		= nintendo_hid_remove,
 	.raw_event	= nintendo_hid_event,
+
+#ifdef CONFIG_PM
+	.resume		= nintendo_hid_resume,
+#endif
 };
 module_hid_driver(nintendo_hid_driver);
 

drivers/hid/hid-nvidia-shield.c

@@ -801,7 +801,7 @@ static inline int thunderstrike_led_create(struct thunderstrike *ts)
 	led->name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL,
 				   "thunderstrike%d:blue:led", ts->id);
 	led->max_brightness = 1;
-	led->flags = LED_CORE_SUSPENDRESUME;
+	led->flags = LED_CORE_SUSPENDRESUME | LED_RETAIN_AT_SHUTDOWN;
 	led->brightness_get = &thunderstrike_led_get_brightness;
 	led->brightness_set = &thunderstrike_led_set_brightness;
 
@@ -1058,7 +1058,7 @@ static int shield_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	ret = hid_hw_start(hdev, HID_CONNECT_HIDINPUT);
 	if (ret) {
 		hid_err(hdev, "Failed to start HID device\n");
-		goto err_haptics;
+		goto err_ts_create;
 	}
 
 	ret = hid_hw_open(hdev);
@@ -1073,9 +1073,12 @@ static int shield_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 err_stop:
 	hid_hw_stop(hdev);
-err_haptics:
+err_ts_create:
+	power_supply_unregister(ts->base.battery_dev.psy);
 	if (ts->haptics_dev)
 		input_unregister_device(ts->haptics_dev);
+	led_classdev_unregister(&ts->led_dev);
+	ida_free(&thunderstrike_ida, ts->id);
 	return ret;
 }
 

drivers/hid/hid-sony.c

@@ -2155,6 +2155,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	return ret;
 
 err:
+	usb_free_urb(sc->ghl_urb);
+
 	hid_hw_stop(hdev);
 	return ret;
 }

drivers/hid/hid-steelseries.c

@@ -390,7 +390,7 @@ static int steelseries_headset_arctis_1_fetch_battery(struct hid_device *hdev)
 	ret = hid_hw_raw_request(hdev, arctis_1_battery_request[0],
 				 write_buf, sizeof(arctis_1_battery_request),
 				 HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
-	if (ret < sizeof(arctis_1_battery_request)) {
+	if (ret < (int)sizeof(arctis_1_battery_request)) {
 		hid_err(hdev, "hid_hw_raw_request() failed with %d\n", ret);
 		ret = -ENODATA;
 	}

drivers/hid/intel-ish-hid/ipc/pci-ish.c

@@ -133,6 +133,14 @@ static int enable_gpe(struct device *dev)
 	}
 	wakeup = &adev->wakeup;
 
+	/*
+	 * Call acpi_disable_gpe(), so that reference count
+	 * gpe_event_info->runtime_count doesn't overflow.
+	 * When gpe_event_info->runtime_count = 0, the call
+	 * to acpi_disable_gpe() simply return.
+	 */
+	acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+
 	acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
 	if (ACPI_FAILURE(acpi_sts)) {
 		dev_err(dev, "enable ose_gpe failed\n");