Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

The following patch set contains some feature additions, code re-organization
and cleanup and a few non-critical fixes. Pls consider applying this to
the net-next tree. Thanks.

v3 changes: add a default case to the switch statement in patch 5 to
satisfy the compiler (-Wswitch).
v2 changes: replaced an if/else block that checks for error values with a
switch/case statement in patch 5.

Patch 1 fixes VF link state transition from disabled to auto that did
not work due to an issue in the FW. This issue could not be fixed in FW due
to some backward compatibility issues it causes with released drivers.
The issue has been fixed by introducing a new version (v2) of the cmd
from 10.6 FW onwards. This patch adds support for v2 version of this cmd.

Patch 2 reports a EOPNOTSUPP status to ethtool when the user tries to
configure BE3/SRIOV in VEPA mode as it is not supported by the chip.

Patch 3 cleansup FW flash image related constant definitions. Many of these
definitions (such as section offset values) were defined in decimal format
rather than hexa-decimal. This makes this part of the code un-readable.
Also some defines related to BE2 are labeld "g2" and defines related to BE3
are labeled "g3".  This patch cleans up all of this to make this code more
readable.

Patch 4 moves the FW cmd code to be_cmds.c. All code relating to FW cmds
has been in be_cmds.[ch], excepting FW flash cmd related code.
This patch moves these routines from be_main.c to be_cmds.c.

Patch 5 adds a log message to report digital signature errors while
flashing a FW image. From FW version 11.0 onwards, the FW supports a new
"secure mode" feature (based on a jumper setting on the adapter.) In this
mode, the FW image when flashed is authenticated with a digital signature.

Patch 6 removes a line of code that has no effect.

Patch 7 removes some unused variables.

Patch 8 fixes port resource descriptor query via the GET_PROFILE FW cmd.
An earlier commit passed a specific pf_num while issuing this cmd as FW
returns descriptors for all functions when pf_num is zero. But, when pf_num
is set to a non-zero value, FW does not return the port resource descriptor.
This patch fixes this by setting pf_num to 0 while issuing the query cmd
and adds code to pick the correct NIC resource descriptor from the list of
descriptors returned by FW.

Patch 9 adds support for ethtool get-dump feature. In the past when this
option was not yet available, this feature was supported via the
--register-dump option as a workaround.  This patch removes support for
FW-dump via --register-dump option as it is now available via --get-dump
option. Even though the "ethtool --register-dump" cmd which used to work
earlier, will now fail with ENOTSUPP error, we feel it is not an issue as
this is used only for diagnostics purpose.

Patch 10 bumps up the driver version.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -37,7 +37,7 @@
 #include "be_hw.h"
 #include "be_roce.h"
 
-#define DRV_VER			"10.6.0.3"
+#define DRV_VER			"11.0.0.0"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"Emulex BladeEngine2"
 #define BE3_NAME		"Emulex BladeEngine3"
@@ -521,7 +521,7 @@ struct be_adapter {
 	struct be_drv_stats drv_stats;
 	struct be_aic_obj aic_obj[MAX_EVT_QS];
 	u8 vlan_prio_bmap;	/* Available Priority BitMap */
-	u16 recommended_prio;	/* Recommended Priority */
+	u16 recommended_prio_bits;/* Recommended Priority bits in vlan tag */
 	struct be_dma_mem rx_filter; /* Cmd DMA mem for rx-filter */
 
 	struct be_dma_mem stats_cmd;
@@ -547,10 +547,6 @@ struct be_adapter {
 
 	u32 beacon_state;	/* for set_phys_id */
 
-	bool eeh_error;
-	bool fw_timeout;
-	bool hw_error;
-
 	u32 port_num;
 	char port_name;
 	u8 mc_type;
@@ -574,6 +570,8 @@ struct be_adapter {
 	struct be_resources pool_res;	/* resources available for the port */
 	struct be_resources res;	/* resources available for the func */
 	u16 num_vfs;			/* Number of VFs provisioned by PF */
+	u8 pf_num;			/* Numbering used by FW, starts at 0 */
+	u8 vf_num;			/* Numbering used by FW, starts at 1 */
 	u8 virtfn;
 	struct be_vf_cfg *vf_cfg;
 	bool be3_native;
@@ -591,11 +589,10 @@ struct be_adapter {
 	u32 msg_enable;
 	int be_get_temp_freq;
 	struct be_hwmon hwmon_info;
-	u8 pf_number;
-	u8 pci_func_num;
 	struct rss_info rss_info;
 	/* Filters for packets that need to be sent to BMC */
 	u32 bmc_filt_mask;
+	u32 fat_dump_len;
 	u16 serial_num[CNTL_SERIAL_NUM_WORDS];
 };