Merge branch 'clockevents/3.17' of git://git.linaro.org/people/daniel…

….lezcano/linux into timers/core

Pull clockevents from Danel Lezcano:
 * New timer driver for the Cirrus Logic CLPS711X SoC
 * New driver for the Mediatek SoC which includes:
 * A new function for of, acked by Rob Herring
 * Move the PXA driver to drivers/clocksource, add DT support
 * Optimization of the exynos_mct driver
 * DT support for the renesas timers family.
 * Some Kconfig and driver fixlets

Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt

@@ -0,0 +1,29 @@
+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-timer".
+- reg       : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks    : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+	aliases {
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	timer1: timer@80000300 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000300 0x4>;
+		interrupts = <8>;
+		clocks = <&clks 5>;
+	};
+
+	timer2: timer@80000340 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000340 0x4>;
+		interrupts = <9>;
+		clocks = <&clks 6>;
+	};

Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt

@@ -0,0 +1,17 @@
+Mediatek MT6577, MT6572 and MT6589 Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "mediatek,mt6577-timer"
+- reg: Should contain location and length for timers register.
+- clocks: Clocks driving the timer hardware. This list should include two
+	clocks. The order is system clock and as second clock the RTC clock.
+
+Examples:
+
+	timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+	};

Documentation/devicetree/bindings/timer/renesas,cmt.txt

@@ -0,0 +1,47 @@
+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channel indices represent the hardware
+position of the channel in the CMT and don't match the channel numbers in the
+datasheets.
+
+Required Properties:
+
+  - compatible: must contain one of the following.
+    - "renesas,cmt-32" for the 32-bit CMT
+		(CMT0 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+		(CMT[234] on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48" for the 48-bit CMT
+		(CMT1 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+  - reg: base address and length of the registers block for the timer module.
+  - interrupts: interrupt-specifier for the timer, one per channel.
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+  - renesas,channels-mask: bitmask of the available channels.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+	them channels 0 and 1 in the documentation.
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+	};

Documentation/devicetree/bindings/timer/renesas,mtu2.txt

@@ -0,0 +1,39 @@
+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+  - compatible: must contain "renesas,mtu2"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt specifiers for the timer, one for each entry in
+    interrupt-names.
+  - interrupt-names: must contain one entry named "tgi?a" for each enabled
+    channel, where "?" is the channel index expressed as one digit from "0" to
+    "4".
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/timer/renesas,tmu.txt

@@ -0,0 +1,39 @@
+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+  - compatible: must contain "renesas,tmu"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt-specifier for the timer, one per channel.
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+  - #renesas,channels: number of channels implemented by the timer, must be 2
+    or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -77,6 +77,7 @@ lsi	LSI Corp. (LSI Logic)
 lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.

arch/arm/Kconfig

@@ -634,6 +634,7 @@ config ARCH_PXA
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE

arch/arm/mach-pxa/Makefile

@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o reset.o
+				   reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 # Generic drivers that other drivers may depend upon

arch/arm/mach-pxa/generic.c

@@ -25,11 +25,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
+#include <mach/irqs.h>
 #include <mach/reset.h>
 #include <mach/smemc.h>
 #include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
+#include <clocksource/pxa.h>
 
 void clear_reset_status(unsigned int mask)
 {
@@ -56,6 +58,15 @@ unsigned long get_clock_tick_rate(void)
 }
 EXPORT_SYMBOL(get_clock_tick_rate);
 
+/*
+ * For non device-tree builds, keep legacy timer init
+ */
+void pxa_timer_init(void)
+{
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
+			    get_clock_tick_rate());
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.