crypto: caam - convert top level drivers to libraries

Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.

There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).

Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs

Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().

While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/caam/Kconfig

@@ -2,6 +2,12 @@
 config CRYPTO_DEV_FSL_CAAM_COMMON
 	tristate
 
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	tristate
+
+config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
+	tristate
+
 config CRYPTO_DEV_FSL_CAAM
 	tristate "Freescale CAAM-Multicore platform driver backend"
 	depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE
@@ -25,7 +31,7 @@ config CRYPTO_DEV_FSL_CAAM_DEBUG
 	  Selecting this will enable printing of various debug
 	  information in the CAAM driver.
 
-config CRYPTO_DEV_FSL_CAAM_JR
+menuconfig CRYPTO_DEV_FSL_CAAM_JR
 	tristate "Freescale CAAM Job Ring driver backend"
 	default y
 	help
@@ -86,8 +92,9 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
 	  threshold. Range is 1-65535.
 
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
-	tristate "Register algorithm implementations with the Crypto API"
+	bool "Register algorithm implementations with the Crypto API"
 	default y
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
 	select CRYPTO_AEAD
 	select CRYPTO_AUTHENC
 	select CRYPTO_BLKCIPHER
@@ -97,13 +104,11 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
 	  scatterlist crypto API (such as the linux native IPSec
 	  stack) to the SEC4 via job ring.
 
-	  To compile this as a module, choose M here: the module
-	  will be called caamalg.
-
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
-	tristate "Queue Interface as Crypto API backend"
+	bool "Queue Interface as Crypto API backend"
 	depends on FSL_DPAA && NET
 	default y
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
 	select CRYPTO_AUTHENC
 	select CRYPTO_BLKCIPHER
 	help
@@ -114,43 +119,33 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
 	  assigned to the kernel should also be more than the number of
 	  job rings.
 
-	  To compile this as a module, choose M here: the module
-	  will be called caamalg_qi.
-
 config CRYPTO_DEV_FSL_CAAM_AHASH_API
-	tristate "Register hash algorithm implementations with Crypto API"
+	bool "Register hash algorithm implementations with Crypto API"
 	default y
+	select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
 	select CRYPTO_HASH
 	help
 	  Selecting this will offload ahash for users of the
 	  scatterlist crypto API to the SEC4 via job ring.
 
-	  To compile this as a module, choose M here: the module
-	  will be called caamhash.
-
 config CRYPTO_DEV_FSL_CAAM_PKC_API
-        tristate "Register public key cryptography implementations with Crypto API"
+        bool "Register public key cryptography implementations with Crypto API"
         default y
         select CRYPTO_RSA
         help
           Selecting this will allow SEC Public key support for RSA.
           Supported cryptographic primitives: encryption, decryption,
           signature and verification.
-          To compile this as a module, choose M here: the module
-          will be called caam_pkc.
 
 config CRYPTO_DEV_FSL_CAAM_RNG_API
-	tristate "Register caam device for hwrng API"
+	bool "Register caam device for hwrng API"
 	default y
 	select CRYPTO_RNG
 	select HW_RANDOM
 	help
 	  Selecting this will register the SEC4 hardware rng to
 	  the hw_random API for suppying the kernel entropy pool.
 
-	  To compile this as a module, choose M here: the module
-	  will be called caamrng.
-
 endif # CRYPTO_DEV_FSL_CAAM_JR
 
 endif # CRYPTO_DEV_FSL_CAAM
@@ -160,6 +155,8 @@ config CRYPTO_DEV_FSL_DPAA2_CAAM
 	depends on FSL_MC_DPIO
 	depends on NETDEVICES
 	select CRYPTO_DEV_FSL_CAAM_COMMON
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_AUTHENC
 	select CRYPTO_AEAD
@@ -171,12 +168,3 @@ config CRYPTO_DEV_FSL_DPAA2_CAAM
 
 	  To compile this as a module, choose M here: the module
 	  will be called dpaa2_caam.
-
-config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
-	def_tristate (CRYPTO_DEV_FSL_CAAM_CRYPTO_API || \
-		      CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI || \
-		      CRYPTO_DEV_FSL_DPAA2_CAAM)
-
-config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
-	def_tristate (CRYPTO_DEV_FSL_CAAM_AHASH_API || \
-		      CRYPTO_DEV_FSL_DPAA2_CAAM)

drivers/crypto/caam/Makefile

@@ -11,20 +11,20 @@ ccflags-y += -DVERSION=\"\"
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += error.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC) += caamalg_desc.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caam_pkc.o
 
-caam-objs := ctrl.o
-caam_jr-objs := jr.o key_gen.o
-caam_pkc-y := caampkc.o pkc_desc.o
+caam-y := ctrl.o
+caam_jr-y := jr.o key_gen.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
+
+caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
 ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
 	ccflags-y += -DCONFIG_CAAM_QI
-	caam-objs += qi.o
 endif
 
 obj-$(CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM) += dpaa2_caam.o

drivers/crypto/caam/caamalg.c

@@ -3471,7 +3471,7 @@ static void caam_aead_exit(struct crypto_aead *tfm)
 	caam_exit_common(crypto_aead_ctx(tfm));
 }
 
-static void __exit caam_algapi_exit(void)
+void caam_algapi_exit(void)
 {
 	int i;
 
@@ -3516,43 +3516,15 @@ static void caam_aead_alg_init(struct caam_aead_alg *t_alg)
 	alg->exit = caam_aead_exit;
 }
 
-static int __init caam_algapi_init(void)
+int caam_algapi_init(struct device *ctrldev)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct caam_drv_private *priv;
+	struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
 	int i = 0, err = 0;
 	u32 aes_vid, aes_inst, des_inst, md_vid, md_inst, ccha_inst, ptha_inst;
 	u32 arc4_inst;
 	unsigned int md_limit = SHA512_DIGEST_SIZE;
 	bool registered = false, gcm_support;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev) {
-		of_node_put(dev_node);
-		return -ENODEV;
-	}
-
-	priv = dev_get_drvdata(&pdev->dev);
-	of_node_put(dev_node);
-
-	/*
-	 * If priv is NULL, it's probably because the caam driver wasn't
-	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
-	 */
-	if (!priv) {
-		err = -ENODEV;
-		goto out_put_dev;
-	}
-
-
 	/*
 	 * Register crypto algorithms the device supports.
 	 * First, detect presence and attributes of DES, AES, and MD blocks.
@@ -3695,14 +3667,5 @@ static int __init caam_algapi_init(void)
 	if (registered)
 		pr_info("caam algorithms registered in /proc/crypto\n");
 
-out_put_dev:
-	put_device(&pdev->dev);
 	return err;
 }
-
-module_init(caam_algapi_init);
-module_exit(caam_algapi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FSL CAAM support for crypto API");
-MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");

drivers/crypto/caam/caamalg_qi.c

@@ -2492,7 +2492,7 @@ static void caam_aead_exit(struct crypto_aead *tfm)
 	caam_exit_common(crypto_aead_ctx(tfm));
 }
 
-static void __exit caam_qi_algapi_exit(void)
+void caam_qi_algapi_exit(void)
 {
 	int i;
 
@@ -2537,45 +2537,17 @@ static void caam_aead_alg_init(struct caam_aead_alg *t_alg)
 	alg->exit = caam_aead_exit;
 }
 
-static int __init caam_qi_algapi_init(void)
+int caam_qi_algapi_init(struct device *ctrldev)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
+	struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
 	int i = 0, err = 0;
 	u32 aes_vid, aes_inst, des_inst, md_vid, md_inst;
 	unsigned int md_limit = SHA512_DIGEST_SIZE;
 	bool registered = false;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	of_node_put(dev_node);
-	if (!pdev)
-		return -ENODEV;
-
-	ctrldev = &pdev->dev;
-	priv = dev_get_drvdata(ctrldev);
-
-	/*
-	 * If priv is NULL, it's probably because the caam driver wasn't
-	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
-	 */
-	if (!priv || !priv->qi_present) {
-		err = -ENODEV;
-		goto out_put_dev;
-	}
-
 	if (caam_dpaa2) {
 		dev_info(ctrldev, "caam/qi frontend driver not suitable for DPAA 2.x, aborting...\n");
-		err = -ENODEV;
-		goto out_put_dev;
+		return -ENODEV;
 	}
 
 	/*
@@ -2688,14 +2660,5 @@ static int __init caam_qi_algapi_init(void)
 	if (registered)
 		dev_info(priv->qidev, "algorithms registered in /proc/crypto\n");
 
-out_put_dev:
-	put_device(ctrldev);
 	return err;
 }
-
-module_init(caam_qi_algapi_init);
-module_exit(caam_qi_algapi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Support for crypto API using CAAM-QI backend");
-MODULE_AUTHOR("Freescale Semiconductor");

drivers/crypto/caam/caamhash.c

@@ -1933,7 +1933,7 @@ static void caam_hash_cra_exit(struct crypto_tfm *tfm)
 	caam_jr_free(ctx->jrdev);
 }
 
-static void __exit caam_algapi_hash_exit(void)
+void caam_algapi_hash_exit(void)
 {
 	struct caam_hash_alg *t_alg, *n;
 
@@ -1991,40 +1991,13 @@ caam_hash_alloc(struct caam_hash_template *template,
 	return t_alg;
 }
 
-static int __init caam_algapi_hash_init(void)
+int caam_algapi_hash_init(struct device *ctrldev)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
 	int i = 0, err = 0;
-	struct caam_drv_private *priv;
+	struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
 	unsigned int md_limit = SHA512_DIGEST_SIZE;
 	u32 md_inst, md_vid;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev) {
-		of_node_put(dev_node);
-		return -ENODEV;
-	}
-
-	priv = dev_get_drvdata(&pdev->dev);
-	of_node_put(dev_node);
-
-	/*
-	 * If priv is NULL, it's probably because the caam driver wasn't
-	 * properly initialized (e.g. RNG4 init failed). Thus, bail out here.
-	 */
-	if (!priv) {
-		err = -ENODEV;
-		goto out_put_dev;
-	}
-
 	/*
 	 * Register crypto algorithms the device supports.  First, identify
 	 * presence and attributes of MD block.
@@ -2045,10 +2018,8 @@ static int __init caam_algapi_hash_init(void)
 	 * Skip registration of any hashing algorithms if MD block
 	 * is not present.
 	 */
-	if (!md_inst) {
-		err = -ENODEV;
-		goto out_put_dev;
-	}
+	if (!md_inst)
+		return -ENODEV;
 
 	/* Limit digest size based on LP256 */
 	if (md_vid == CHA_VER_VID_MD_LP256)
@@ -2105,14 +2076,5 @@ static int __init caam_algapi_hash_init(void)
 			list_add_tail(&t_alg->entry, &hash_list);
 	}
 
-out_put_dev:
-	put_device(&pdev->dev);
 	return err;
 }
-
-module_init(caam_algapi_hash_init);
-module_exit(caam_algapi_hash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FSL CAAM support for ahash functions of crypto API");
-MODULE_AUTHOR("Freescale Semiconductor - NMG");