can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate

commit 47c5e47 upstream.

For cases when flexcan is built-in, bitrate is still not set at
registering. So flexcan_chip_freeze() generates:

[    1.860000] *** ZERO DIVIDE ***   FORMAT=4
[    1.860000] Current process id is 1
[    1.860000] BAD KERNEL TRAP: 00000000
[    1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8

To allow chip freeze, using an hardcoded timeout when bitrate is still
not set.

Fixes: ec15e27 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
[mkl: use if instead of ? operator]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Koen Vandeputte <koen.vandeputte@citymesh.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/can/flexcan.c

@@ -413,9 +413,15 @@ static int flexcan_chip_disable(struct flexcan_priv *priv)
 static int flexcan_chip_freeze(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
-	unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
+	unsigned int timeout;
+	u32 bitrate = priv->can.bittiming.bitrate;
 	u32 reg;
 
+	if (bitrate)
+		timeout = 1000 * 1000 * 10 / bitrate;
+	else
+		timeout = FLEXCAN_TIMEOUT_US / 10;
+
 	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT;
 	flexcan_write(reg, &regs->mcr);