Merge tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the contents are bugfixes for the devicetree files:

   - A Qualcomm MSM8974 pin controller regression, caused by a cleanup
     patch that gets partially reverted here.

   - Missing properties for Broadcom BCM49xx to fix timer detection and
     SMP boot.

   - Fix touchscreen pinctrl for imx6ull-colibri board

   - Multiple fixes for Rockchip rk3399 based machines including the vdu
     clock-rate fix, otg port fix on Quartz64-A and ethernet on
     Quartz64-B

   - Fixes for misspelled DT contents causing minor problems on
     imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and
     ls1028a

  And a couple of changes elsewhere:

   - Fix binding for Allwinner D1 display pipeline

   - Trivial code fixes to the TEE and reset controller driver
     subsystems and the rockchip platform code.

   - Multiple updates to the MAINTAINERS files, marking the Palm Treo
     support as orphaned, and fixing some entries for added or changed
     file names"

* tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
  arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
  arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
  ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
  ARM: dts: at91: sama5d2: Fix typo in i2s1 node
  tee: tee_get_drvdata(): fix description of return value
  optee: Remove duplicate 'of' in two places.
  ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
  ARM: dts: colibri-imx6ull: fix snvs pinmux group
  optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
  MAINTAINERS: add polarfire rng, pci and clock drivers
  MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan
  ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
  arm64: dts: ls1028a: Update SFP node to include clock
  dt-bindings: display: sun4i: Fix D1 pipeline count
  ARM: dts: qcom: msm8974: re-add missing pinctrl
  reset: Fix devm bulk optional exclusive control getter
  MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
  ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()
  arm64: dts: rockchip: Assign RK3399 VDU clock rate
  arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
  ...

CREDITS

@@ -627,6 +627,10 @@ S: 48287 Sawleaf
 S: Fremont, California 94539
 S: USA
 
+N: Tomas Cech
+E: sleep_walker@suse.com
+D: arm/palm treo support
+
 N: Florent Chabaud
 E: florent.chabaud@polytechnique.org
 D: software suspend

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml

@@ -94,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:

MAINTAINERS

@@ -2498,10 +2498,8 @@ F:	drivers/power/reset/oxnas-restart.c
 N:	oxnas
 
 ARM/PALM TREO SUPPORT
-M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-W:	http://hackndev.com
+S:	Orphan
 F:	arch/arm/mach-pxa/palmtreo.*
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
@@ -17274,12 +17272,15 @@ N:	riscv
 K:	riscv
 
 RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
-M:	Lewis Hanly <lewis.hanly@microchip.com>
 M:	Conor Dooley <conor.dooley@microchip.com>
+M:	Daire McNamara <daire.mcnamara@microchip.com>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
 F:	arch/riscv/boot/dts/microchip/
+F:	drivers/char/hw_random/mpfs-rng.c
+F:	drivers/clk/microchip/clk-mpfs.c
 F:	drivers/mailbox/mailbox-mpfs.c
+F:	drivers/pci/controller/pcie-microchip-host.c
 F:	drivers/soc/microchip/
 F:	include/soc/microchip/mpfs.h
 

arch/arm/boot/dts/imx6qdl-ts7970.dtsi

@@ -226,7 +226,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {

arch/arm/boot/dts/imx6ull-colibri.dtsi

@@ -166,7 +166,7 @@
 	atmel_mxt_ts: touchscreen@4a {
 		compatible = "atmel,maxtouch";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn>;
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
 		reg = <0x4a>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
@@ -331,7 +331,6 @@
 	pinctrl_atmel_conn: atmelconngrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
@@ -684,6 +683,12 @@
 };
 
 &iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
 	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */

arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi

@@ -87,22 +87,22 @@
 
 	phy4: ethernet-phy@5 {
 		reg = <5>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy5: ethernet-phy@6 {
 		reg = <6>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy6: ethernet-phy@7 {
 		reg = <7>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy7: ethernet-phy@8 {
 		reg = <8>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 };
 

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -506,6 +506,8 @@
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
 			status = "disabled";
 		};
 
@@ -581,6 +583,9 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
 			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -599,6 +604,8 @@
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
 			status = "disabled";
 		};
 
@@ -639,6 +646,9 @@
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -1256,7 +1266,7 @@
 				};
 			};
 
-			blsp1_uart2_active: blsp1-uart2-active {
+			blsp1_uart2_default: blsp1-uart2-default {
 				rx {
 					pins = "gpio5";
 					function = "blsp_uart2";
@@ -1272,7 +1282,7 @@
 				};
 			};
 
-			blsp2_uart1_active: blsp2-uart1-active {
+			blsp2_uart1_default: blsp2-uart1-default {
 				tx-rts {
 					pins = "gpio41", "gpio44";
 					function = "blsp_uart7";
@@ -1295,7 +1305,7 @@
 				bias-pull-down;
 			};
 
-			blsp2_uart4_active: blsp2-uart4-active {
+			blsp2_uart4_default: blsp2-uart4-default {
 				tx-rts {
 					pins = "gpio53", "gpio56";
 					function = "blsp_uart10";
@@ -1406,7 +1416,19 @@
 				bias-pull-up;
 			};
 
-			/* BLSP2_I2C6 info is missing - nobody uses it though? */
+			blsp2_i2c6_default: blsp2-i2c6-default {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
 
 			spi8_default: spi8_default {
 				mosi {

arch/arm/boot/dts/sama5d2.dtsi

@@ -1124,7 +1124,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts

@@ -169,7 +169,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};

arch/arm/mach-rockchip/pm.c

@@ -311,7 +311,7 @@ void __init rockchip_suspend_init(void)
 					     &match);
 	if (!match) {
 		pr_err("Failed to find PMU node\n");
-		return;
+		goto out_put;
 	}
 	pm_data = (struct rockchip_pm_data *) match->data;
 
@@ -320,9 +320,12 @@ void __init rockchip_suspend_init(void)
 
 		if (ret) {
 			pr_err("%s: matches init error %d\n", __func__, ret);
-			return;
+			goto out_put;
 		}
 	}
 
 	suspend_set_ops(pm_data->ops);
+
+out_put:
+	of_node_put(np);
 }

arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi

@@ -9,6 +9,14 @@
 		/delete-node/ cpu@3;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi

@@ -29,6 +29,8 @@
 			device_type = "cpu";
 			compatible = "brcm,brahma-b53";
 			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
 			next-level-cache = <&l2>;
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -224,9 +224,12 @@
 			little-endian;
 		};
 
-		efuse@1e80000 {
+		sfp: efuse@1e80000 {
 			compatible = "fsl,ls1028a-sfp";
 			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
 			#address-cells = <1>;
 			#size-cells = <1>;
 

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

@@ -376,7 +376,8 @@ camera: &i2c7 {
 		<&cru ACLK_VIO>,
 		<&cru ACLK_GIC_PRE>,
 		<&cru PCLK_DDR>,
-		<&cru ACLK_HDCP>;
+		<&cru ACLK_HDCP>,
+		<&cru ACLK_VDU>;
 	assigned-clock-rates =
 		<600000000>, <1600000000>,
 		<1000000000>,
@@ -388,6 +389,7 @@ camera: &i2c7 {
 		<400000000>,
 		<200000000>,
 		<200000000>,
+		<400000000>,
 		<400000000>;
 };
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1462,7 +1462,8 @@
 			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
 			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
 			<&cru ACLK_GIC_PRE>,
-			<&cru PCLK_DDR>;
+			<&cru PCLK_DDR>,
+			<&cru ACLK_VDU>;
 		assigned-clock-rates =
 			 <594000000>,  <800000000>,
 			<1000000000>,
@@ -1473,7 +1474,8 @@
 			 <100000000>,   <50000000>,
 			 <400000000>, <400000000>,
 			 <200000000>,
-			 <200000000>;
+			 <200000000>,
+			 <400000000>;
 	};
 
 	grf: syscon@ff770000 {

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts

@@ -687,6 +687,7 @@
 };
 
 &usb_host0_xhci {
+	dr_mode = "host";
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -133,7 +133,7 @@
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim

drivers/tee/optee/optee_smc.h

@@ -189,7 +189,7 @@ struct optee_smc_call_get_os_revision_result {
  * Have config return register usage:
  * a0	OPTEE_SMC_RETURN_OK
  * a1	Physical address of start of SHM
- * a2	Size of of SHM
+ * a2	Size of SHM
  * a3	Cache settings of memory, as defined by the
  *	OPTEE_SMC_SHM_* values above
  * a4-7	Preserved

drivers/tee/optee/smc_abi.c

@@ -884,8 +884,8 @@ static int optee_smc_do_call_with_arg(struct tee_context *ctx,
 
 		rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
 		rpc_arg = tee_shm_get_va(shm, offs + rpc_arg_offs);
-		if (IS_ERR(arg))
-			return PTR_ERR(arg);
+		if (IS_ERR(rpc_arg))
+			return PTR_ERR(rpc_arg);
 	}
 
 	if  (rpc_arg && tee_shm_is_dynamic(shm)) {

drivers/tee/tee_core.c

@@ -1073,7 +1073,7 @@ EXPORT_SYMBOL_GPL(tee_device_unregister);
 /**
  * tee_get_drvdata() - Return driver_data pointer
  * @teedev:	Device containing the driver_data pointer
- * @returns the driver_data pointer supplied to tee_register().
+ * @returns the driver_data pointer supplied to tee_device_alloc().
  */
 void *tee_get_drvdata(struct tee_device *teedev)
 {

include/linux/reset.h

@@ -731,7 +731,7 @@ static inline int __must_check
 devm_reset_control_bulk_get_optional_exclusive(struct device *dev, int num_rstcs,
 					       struct reset_control_bulk_data *rstcs)
 {
-	return __devm_reset_control_bulk_get(dev, num_rstcs, rstcs, true, false, true);
+	return __devm_reset_control_bulk_get(dev, num_rstcs, rstcs, false, true, true);
 }
 
 /**