Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Resolve conflict between d2912cb ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer
and fe03d47 ("Update my email address") which updates Jozsef
Kadlecsik's email.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

.mailmap

@@ -81,6 +81,7 @@ Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
+Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>
@@ -238,6 +239,7 @@ Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Will Deacon <will@kernel.org> <will.deacon@arm.com>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

CREDITS

@@ -3364,6 +3364,14 @@ S: Braunschweiger Strasse 79
 S: 31134 Hildesheim
 S: Germany
 
+N: Martin Schwidefsky
+D: Martin was the most significant contributor to the initial s390
+D: port of the Linux Kernel and later the maintainer of the s390
+D: architecture backend for almost two decades.
+D: He passed away in 2019, and will be greatly missed.
+S: Germany
+W: https://lwn.net/Articles/789028/
+
 N: Marcel Selhorst
 E: tpmdd@selhorst.net
 D: TPM driver

Documentation/ABI/testing/sysfs-bus-siox

@@ -1,6 +1,6 @@
 What:		/sys/bus/siox/devices/siox-X/active
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		On reading represents the current state of the bus. If it
 		contains a "0" the bus is stopped and connected devices are
@@ -12,7 +12,7 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X/device_add
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Write-only file. Write
 
@@ -27,61 +27,61 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X/device_remove
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Write-only file. A single write removes the last device in the siox chain.
 
 What:		/sys/bus/siox/devices/siox-X/poll_interval_ns
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Defines the interval between two poll cycles in nano seconds.
 		Note this is rounded to jiffies on writing. On reading the current value
 		is returned.
 
 What:		/sys/bus/siox/devices/siox-X-Y/connected
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
 		communication with it is not ensured. "1" signals a working connection.
 
 What:		/sys/bus/siox/devices/siox-X-Y/inbytes
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the inbytes value provided to siox-X/device_add
 
 What:		/sys/bus/siox/devices/siox-X-Y/status_errors
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Counts the number of time intervals when the read status byte doesn't yield the
 		expected value.
 
 What:		/sys/bus/siox/devices/siox-X-Y/type
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the type value provided to siox-X/device_add.
 
 What:		/sys/bus/siox/devices/siox-X-Y/watchdog
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting if the watchdog of the siox device is
 		active. "0" means the watchdog is not active and the device is expected to
 		be operational. "1" means the watchdog keeps the device in reset.
 
 What:		/sys/bus/siox/devices/siox-X-Y/watchdog_errors
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the number to time intervals when the
 		watchdog was active.
 
 What:		/sys/bus/siox/devices/siox-X-Y/outbytes
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the outbytes value provided to siox-X/device_add.

Documentation/ABI/testing/sysfs-class-net-qmi

@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.

Documentation/admin-guide/cgroup-v2.rst

@@ -177,6 +177,15 @@ cgroup v2 currently supports the following mount options.
 	ignored on non-init namespace mounts.  Please refer to the
 	Delegation section for details.
 
+  memory_localevents
+
+        Only populate memory.events with data for the current cgroup,
+        and not any subtrees. This is legacy behaviour, the default
+        behaviour without this option is to include subtree counts.
+        This option is system wide and can only be set on mount or
+        modified through remount from the init namespace. The mount
+        option is ignored on non-init namespace mounts.
+
 
 Organizing Processes and Threads
 --------------------------------

Documentation/arm64/sve.txt

@@ -56,6 +56,18 @@ model features for SVE is included in Appendix A.
   is to connect to a target process first and then attempt a
   ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
 
+* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory
+  between userspace and the kernel, the register value is encoded in memory in
+  an endianness-invariant layout, with bits [(8 * i + 7) : (8 * i)] encoded at
+  byte offset i from the start of the memory representation.  This affects for
+  example the signal frame (struct sve_context) and ptrace interface
+  (struct user_sve_header) and associated data.
+
+  Beware that on big-endian systems this results in a different byte order than
+  for the FPSIMD V-registers, which are stored as single host-endian 128-bit
+  values, with bits [(127 - 8 * i) : (120 - 8 * i)] of the register encoded at
+  byte offset i.  (struct fpsimd_context, struct user_fpsimd_state).
+
 
 2.  Vector length terminology
 -----------------------------
@@ -124,6 +136,10 @@ the SVE instruction set architecture.
   size and layout.  Macros SVE_SIG_* are defined [1] to facilitate access to
   the members.
 
+* Each scalable register (Zn, Pn, FFR) is stored in an endianness-invariant
+  layout, with bits [(8 * i + 7) : (8 * i)] stored at byte offset i from the
+  start of the register's representation in memory.
+
 * If the SVE context is too big to fit in sigcontext.__reserved[], then extra
   space is allocated on the stack, an extra_context record is written in
   __reserved[] referencing this space.  sve_context is then written in the

Documentation/block/switching-sched.txt

@@ -13,11 +13,9 @@ you can do so by typing:
 
 # mount none /sys -t sysfs
 
-As of the Linux 2.6.10 kernel, it is now possible to change the
-IO scheduler for a given block device on the fly (thus making it possible,
-for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the deadline or noop schedulers - which
-can improve that device's throughput).
+It is possible to change the IO scheduler for a given block device on
+the fly to select one of mq-deadline, none, bfq, or kyber schedulers -
+which can improve that device's throughput.
 
 To set a specific scheduler, simply do this:
 
@@ -30,8 +28,8 @@ The list of defined schedulers can be found by simply doing
 a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
-# cat /sys/block/hda/queue/scheduler
-noop deadline [cfq]
-# echo deadline > /sys/block/hda/queue/scheduler
-# cat /sys/block/hda/queue/scheduler
-noop [deadline] cfq
+# cat /sys/block/sda/queue/scheduler
+[mq-deadline] kyber bfq none
+# echo none >/sys/block/sda/queue/scheduler
+# cat /sys/block/sda/queue/scheduler
+[none] mq-deadline kyber bfq

Documentation/cgroup-v1/blkio-controller.txt

@@ -8,61 +8,13 @@ both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
 Plan is to use the same cgroup based management interface for blkio controller
 and based on user options switch IO policies in the background.
 
-Currently two IO control policies are implemented. First one is proportional
-weight time based division of disk policy. It is implemented in CFQ. Hence
-this policy takes effect only on leaf nodes when CFQ is being used. The second
-one is throttling policy which can be used to specify upper IO rate limits
-on devices. This policy is implemented in generic block layer and can be
-used on leaf nodes as well as higher level logical devices like device mapper.
+One IO control policy is throttling policy which can be used to
+specify upper IO rate limits on devices. This policy is implemented in
+generic block layer and can be used on leaf nodes as well as higher
+level logical devices like device mapper.
 
 HOWTO
 =====
-Proportional Weight division of bandwidth
------------------------------------------
-You can do a very simple testing of running two dd threads in two different
-cgroups. Here is what you can do.
-
-- Enable Block IO controller
-	CONFIG_BLK_CGROUP=y
-
-- Enable group scheduling in CFQ
-	CONFIG_CFQ_GROUP_IOSCHED=y
-
-- Compile and boot into kernel and mount IO controller (blkio); see
-  cgroups.txt, Why are cgroups needed?.
-
-	mount -t tmpfs cgroup_root /sys/fs/cgroup
-	mkdir /sys/fs/cgroup/blkio
-	mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
-
-- Create two cgroups
-	mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
-
-- Set weights of group test1 and test2
-	echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
-	echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
-
-- Create two same size files (say 512MB each) on same disk (file1, file2) and
-  launch two dd threads in different cgroup to read those files.
-
-	sync
-	echo 3 > /proc/sys/vm/drop_caches
-
-	dd if=/mnt/sdb/zerofile1 of=/dev/null &
-	echo $! > /sys/fs/cgroup/blkio/test1/tasks
-	cat /sys/fs/cgroup/blkio/test1/tasks
-
-	dd if=/mnt/sdb/zerofile2 of=/dev/null &
-	echo $! > /sys/fs/cgroup/blkio/test2/tasks
-	cat /sys/fs/cgroup/blkio/test2/tasks
-
-- At macro level, first dd should finish first. To get more precise data, keep
-  on looking at (with the help of script), at blkio.disk_time and
-  blkio.disk_sectors files of both test1 and test2 groups. This will tell how
-  much disk time (in milliseconds), each group got and how many sectors each
-  group dispatched to the disk. We provide fairness in terms of disk time, so
-  ideally io.disk_time of cgroups should be in proportion to the weight.
-
 Throttling/Upper Limit policy
 -----------------------------
 - Enable Block IO controller
@@ -94,7 +46,7 @@ Throttling/Upper Limit policy
 Hierarchical Cgroups
 ====================
 
-Both CFQ and throttling implement hierarchy support; however,
+Throttling implements hierarchy support; however,
 throttling's hierarchy support is enabled iff "sane_behavior" is
 enabled from cgroup side, which currently is a development option and
 not publicly available.
@@ -107,9 +59,8 @@ If somebody created a hierarchy like as follows.
 			|
 		     test3
 
-CFQ by default and throttling with "sane_behavior" will handle the
-hierarchy correctly.  For details on CFQ hierarchy support, refer to
-Documentation/block/cfq-iosched.txt.  For throttling, all limits apply
+Throttling with "sane_behavior" will handle the
+hierarchy correctly. For throttling, all limits apply
 to the whole subtree while all statistics are local to the IOs
 directly generated by tasks in that cgroup.
 
@@ -130,10 +81,6 @@ CONFIG_DEBUG_BLK_CGROUP
 	- Debug help. Right now some additional stats file show up in cgroup
 	  if this option is enabled.
 
-CONFIG_CFQ_GROUP_IOSCHED
-	- Enables group scheduling in CFQ. Currently only 1 level of group
-	  creation is allowed.
-
 CONFIG_BLK_DEV_THROTTLING
 	- Enable block device throttling support in block layer.
 
@@ -344,32 +291,3 @@ Common files among various policies
 - blkio.reset_stats
 	- Writing an int to this file will result in resetting all the stats
 	  for that cgroup.
-
-CFQ sysfs tunable
-=================
-/sys/block/<disk>/queue/iosched/slice_idle
-------------------------------------------
-On a faster hardware CFQ can be slow, especially with sequential workload.
-This happens because CFQ idles on a single queue and single queue might not
-drive deeper request queue depths to keep the storage busy. In such scenarios
-one can try setting slice_idle=0 and that would switch CFQ to IOPS
-(IO operations per second) mode on NCQ supporting hardware.
-
-That means CFQ will not idle between cfq queues of a cfq group and hence be
-able to driver higher queue depth and achieve better throughput. That also
-means that cfq provides fairness among groups in terms of IOPS and not in
-terms of disk time.
-
-/sys/block/<disk>/queue/iosched/group_idle
-------------------------------------------
-If one disables idling on individual cfq queues and cfq service trees by
-setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
-on the group in an attempt to provide fairness among groups.
-
-By default group_idle is same as slice_idle and does not do anything if
-slice_idle is enabled.
-
-One can experience an overall throughput drop if you have created multiple
-groups and put applications in that group which are not driving enough
-IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
-on individual groups and throughput should improve.

Documentation/cgroup-v1/hugetlb.txt

@@ -32,14 +32,18 @@ Brief summary of control files
  hugetlb.<hugepagesize>.usage_in_bytes     # show current usage for "hugepagesize" hugetlb
  hugetlb.<hugepagesize>.failcnt		   # show the number of allocation failure due to HugeTLB limit
 
-For a system supporting two hugepage size (16M and 16G) the control
+For a system supporting three hugepage sizes (64k, 32M and 1G), the control
 files include:
 
-hugetlb.16GB.limit_in_bytes
-hugetlb.16GB.max_usage_in_bytes
-hugetlb.16GB.usage_in_bytes
-hugetlb.16GB.failcnt
-hugetlb.16MB.limit_in_bytes
-hugetlb.16MB.max_usage_in_bytes
-hugetlb.16MB.usage_in_bytes
-hugetlb.16MB.failcnt
+hugetlb.1GB.limit_in_bytes
+hugetlb.1GB.max_usage_in_bytes
+hugetlb.1GB.usage_in_bytes
+hugetlb.1GB.failcnt
+hugetlb.64KB.limit_in_bytes
+hugetlb.64KB.max_usage_in_bytes
+hugetlb.64KB.usage_in_bytes
+hugetlb.64KB.failcnt
+hugetlb.32MB.limit_in_bytes
+hugetlb.32MB.max_usage_in_bytes
+hugetlb.32MB.usage_in_bytes
+hugetlb.32MB.failcnt

Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt

@@ -4,6 +4,7 @@ Required properties:
  - compatible: Should be one of the following:
    - "microchip,mcp2510" for MCP2510.
    - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
  - reg: SPI chip select.
  - clocks: The clock feeding the CAN controller.
  - interrupts: Should contain IRQ line for the CAN controller.

Documentation/devicetree/bindings/net/dsa/ksz.txt

@@ -16,6 +16,8 @@ Required properties:
 Optional properties:
 
 - reset-gpios		: Should be a gpio specifier for a reset line
+- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
+			  125MHz instead of 25MHz.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.