Merge tag 'for-4.9' of github.com:linux-nand/linux

"
Notable core changes:
- add the infrastructure to automate NAND timings configuration
- provide a generic DT property to maximize ECC strength

The rest is just a bunch of minor drivers and core fixes/cleanup
patches.
"

Also not noted: some refactoring in the core bad block table handling,
to help with improving some of the logic in error cases.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Documentation/devicetree/bindings/mtd/nand.txt

@@ -35,6 +35,15 @@ Optional NAND chip properties:
 - nand-ecc-step-size: integer representing the number of data bytes
 		      that are covered by a single ECC step.
 
+- nand-ecc-maximize: boolean used to specify that you want to maximize ECC
+		     strength. The maximum ECC strength is both controller and
+		     chip dependent. The controller side has to select the ECC
+		     config providing the best strength and taking the OOB area
+		     size constraint into account.
+		     This is particularly useful when only the in-band area is
+		     used by the upper layers, and you want to make your NAND
+		     as reliable as possible.
+
 The ECC strength and ECC step size properties define the correction capability
 of a controller. Together, they say a controller can correct "{strength} bit
 errors per {size} bytes".

MAINTAINERS

@@ -5976,6 +5976,12 @@ M:	Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
 S:	Maintained
 F:	drivers/dma/dma-jz4780.c
 
+INGENIC JZ4780 NAND DRIVER
+M:	Harvey Hunt <harveyhuntnexus@gmail.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/jz4780_*
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@linux.vnet.ibm.com>
 M:	Dmitry Kasatkin <dmitry.kasatkin@gmail.com>

drivers/mtd/nand/Kconfig

@@ -88,11 +88,11 @@ config MTD_NAND_AMS_DELTA
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
-	depends on ARCH_OMAP2PLUS
+	tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
+	depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE)
 	help
-          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
-	  platforms.
+          Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
+	  and Keystone platforms.
 
 config MTD_NAND_OMAP_BCH
 	depends on MTD_NAND_OMAP2
@@ -428,7 +428,7 @@ config MTD_NAND_ORION
 
 config MTD_NAND_FSL_ELBC
 	tristate "NAND support for Freescale eLBC controllers"
-	depends on PPC
+	depends on FSL_SOC
 	select FSL_LBC
 	help
 	  Various Freescale chips, including the 8313, include a NAND Flash
@@ -438,7 +438,7 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_IFC
 	tristate "NAND support for Freescale IFC controller"
-	depends on MTD_NAND && (FSL_SOC || ARCH_LAYERSCAPE)
+	depends on FSL_SOC || ARCH_LAYERSCAPE
 	select FSL_IFC
 	select MEMORY
 	help

drivers/mtd/nand/bf5xx_nand.c

@@ -761,8 +761,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, info);
 
-	spin_lock_init(&info->controller.lock);
-	init_waitqueue_head(&info->controller.wq);
+	nand_hw_control_init(&info->controller);
 
 	info->device     = &pdev->dev;
 	info->platform   = plat;

drivers/mtd/nand/brcmnand/brcmnand.c

@@ -1336,7 +1336,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		u32 *flash_cache = (u32 *)ctrl->flash_cache;
 		int i;
 
-		brcmnand_soc_data_bus_prepare(ctrl->soc);
+		brcmnand_soc_data_bus_prepare(ctrl->soc, true);
 
 		/*
 		 * Must cache the FLASH_CACHE now, since changes in
@@ -1349,7 +1349,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
 			 */
 			flash_cache[i] = be32_to_cpu(brcmnand_read_fc(ctrl, i));
 
-		brcmnand_soc_data_bus_unprepare(ctrl->soc);
+		brcmnand_soc_data_bus_unprepare(ctrl->soc, true);
 
 		/* Cleanup from HW quirk: restore SECTOR_SIZE_1K */
 		if (host->hwcfg.sector_size_1k)
@@ -1565,12 +1565,12 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 		brcmnand_waitfunc(mtd, chip);
 
 		if (likely(buf)) {
-			brcmnand_soc_data_bus_prepare(ctrl->soc);
+			brcmnand_soc_data_bus_prepare(ctrl->soc, false);
 
 			for (j = 0; j < FC_WORDS; j++, buf++)
 				*buf = brcmnand_read_fc(ctrl, j);
 
-			brcmnand_soc_data_bus_unprepare(ctrl->soc);
+			brcmnand_soc_data_bus_unprepare(ctrl->soc, false);
 		}
 
 		if (oob)
@@ -1815,12 +1815,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
 		(void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
 
 		if (buf) {
-			brcmnand_soc_data_bus_prepare(ctrl->soc);
+			brcmnand_soc_data_bus_prepare(ctrl->soc, false);
 
 			for (j = 0; j < FC_WORDS; j++, buf++)
 				brcmnand_write_fc(ctrl, j, *buf);
 
-			brcmnand_soc_data_bus_unprepare(ctrl->soc);
+			brcmnand_soc_data_bus_unprepare(ctrl->soc, false);
 		} else if (oob) {
 			for (j = 0; j < FC_WORDS; j++)
 				brcmnand_write_fc(ctrl, j, 0xffffffff);
@@ -2370,8 +2370,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 
 	init_completion(&ctrl->done);
 	init_completion(&ctrl->dma_done);
-	spin_lock_init(&ctrl->controller.lock);
-	init_waitqueue_head(&ctrl->controller.wq);
+	nand_hw_control_init(&ctrl->controller);
 	INIT_LIST_HEAD(&ctrl->host_list);
 
 	/* NAND register range */

drivers/mtd/nand/brcmnand/brcmnand.h

@@ -23,19 +23,22 @@ struct dev_pm_ops;
 struct brcmnand_soc {
 	bool (*ctlrdy_ack)(struct brcmnand_soc *soc);
 	void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
-	void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare);
+	void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare,
+				 bool is_param);
 };
 
-static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc)
+static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc,
+						 bool is_param)
 {
 	if (soc && soc->prepare_data_bus)
-		soc->prepare_data_bus(soc, true);
+		soc->prepare_data_bus(soc, true, is_param);
 }
 
-static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc)
+static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc,
+						   bool is_param)
 {
 	if (soc && soc->prepare_data_bus)
-		soc->prepare_data_bus(soc, false);
+		soc->prepare_data_bus(soc, false, is_param);
 }
 
 static inline u32 brcmnand_readl(void __iomem *addr)

drivers/mtd/nand/brcmnand/iproc_nand.c

@@ -74,7 +74,8 @@ static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en)
 	spin_unlock_irqrestore(&priv->idm_lock, flags);
 }
 
-static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare)
+static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare,
+				  bool is_param)
 {
 	struct iproc_nand_soc *priv =
 			container_of(soc, struct iproc_nand_soc, soc);
@@ -86,10 +87,19 @@ static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare)
 
 	val = brcmnand_readl(mmio);
 
-	if (prepare)
-		val |= IPROC_NAND_APB_LE_MODE;
-	else
+	/*
+	 * In the case of BE or when dealing with NAND data, alway configure
+	 * the APB bus to LE mode before accessing the FIFO and back to BE mode
+	 * after the access is done
+	 */
+	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) || !is_param) {
+		if (prepare)
+			val |= IPROC_NAND_APB_LE_MODE;
+		else
+			val &= ~IPROC_NAND_APB_LE_MODE;
+	} else { /* when in LE accessing the parameter page, keep APB in BE */
 		val &= ~IPROC_NAND_APB_LE_MODE;
+	}
 
 	brcmnand_writel(val, mmio);
 

drivers/mtd/nand/docg4.c

@@ -1249,8 +1249,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
 	nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
 	nand->controller = &nand->hwcontrol;
-	spin_lock_init(&nand->controller->lock);
-	init_waitqueue_head(&nand->controller->wq);
+	nand_hw_control_init(nand->controller);
 
 	/* methods */
 	nand->cmdfunc = docg4_command;

drivers/mtd/nand/fsl_elbc_nand.c

@@ -879,8 +879,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
 		}
 		elbc_fcm_ctrl->counter++;
 
-		spin_lock_init(&elbc_fcm_ctrl->controller.lock);
-		init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+		nand_hw_control_init(&elbc_fcm_ctrl->controller);
 		fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
 	} else {
 		elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;

drivers/mtd/nand/fsl_ifc_nand.c

@@ -987,8 +987,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
 		ifc_nand_ctrl->addr = NULL;
 		fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
 
-		spin_lock_init(&ifc_nand_ctrl->controller.lock);
-		init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
+		nand_hw_control_init(&ifc_nand_ctrl->controller);
 	} else {
 		ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
 	}

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -318,7 +318,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
 		return -EINVAL;
 	}
 
-	geo->page_size = mtd->writesize + mtd->oobsize;
+	geo->page_size = mtd->writesize + geo->metadata_size +
+		(geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
 	geo->payload_size = mtd->writesize;
 
 	/*

drivers/mtd/nand/jz4780_nand.c

@@ -368,9 +368,8 @@ static int jz4780_nand_probe(struct platform_device *pdev)
 	nfc->dev = dev;
 	nfc->num_banks = num_banks;
 
-	spin_lock_init(&nfc->controller.lock);
+	nand_hw_control_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
-	init_waitqueue_head(&nfc->controller.wq);
 
 	ret = jz4780_nand_init_chips(nfc, pdev);
 	if (ret) {