Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/nico/orion into fixes

Documentation/DocBook/kgdb.tmpl

@@ -72,7 +72,7 @@
     kgdb is a source level debugger for linux kernel. It is used along
     with gdb to debug a linux kernel.  The expectation is that gdb can
     be used to "break in" to the kernel to inspect memory, variables
-    and look through a cal stack information similar to what an
+    and look through call stack information similar to what an
     application developer would use gdb for.  It is possible to place
     breakpoints in kernel code and perform some limited execution
     stepping.
@@ -93,8 +93,10 @@
   <chapter id="CompilingAKernel">
     <title>Compiling a kernel</title>
     <para>
-    To enable <symbol>CONFIG_KGDB</symbol>, look under the "Kernel debugging"
-    and then select "KGDB: kernel debugging with remote gdb".
+    To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
+    "Prompt for development and/or incomplete code/drivers"
+    (CONFIG_EXPERIMENTAL) in  "General setup", then under the
+    "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
     Next you should choose one of more I/O drivers to interconnect debugging

Documentation/filesystems/Locking

@@ -92,7 +92,6 @@ prototypes:
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
 	int (*write_inode) (struct inode *, int);
-	void (*put_inode) (struct inode *);
 	void (*drop_inode) (struct inode *);
 	void (*delete_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
@@ -115,7 +114,6 @@ alloc_inode:		no	no	no
 destroy_inode:		no
 dirty_inode:		no				(must not sleep)
 write_inode:		no
-put_inode:		no
 drop_inode:		no				!!!inode_lock!!!
 delete_inode:		no
 put_super:		yes	yes	no

Documentation/filesystems/vfs.txt

@@ -205,7 +205,6 @@ struct super_operations {
 
         void (*dirty_inode) (struct inode *);
         int (*write_inode) (struct inode *, int);
-        void (*put_inode) (struct inode *);
         void (*drop_inode) (struct inode *);
         void (*delete_inode) (struct inode *);
         void (*put_super) (struct super_block *);
@@ -246,9 +245,6 @@ or bottom half).
 	inode to disc.  The second parameter indicates whether the write
 	should be synchronous or not, not all filesystems check this flag.
 
-  put_inode: called when the VFS inode is removed from the inode
-	cache.
-
   drop_inode: called when the last access to the inode is dropped,
 	with the inode_lock spinlock held.
 

Documentation/kbuild/kconfig-language.txt

@@ -377,27 +377,3 @@ config FOO
 
 limits FOO to module (=m) or disabled (=n).
 
-
-Build limited by a third config symbol which may be =y or =m
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-A common idiom that we see (and sometimes have problems with) is this:
-
-When option C in B (module or subsystem) uses interfaces from A (module
-or subsystem), and both A and B are tristate (could be =y or =m if they
-were independent of each other, but they aren't), then we need to limit
-C such that it cannot be built statically if A is built as a loadable
-module.  (C already depends on B, so there is no dependency issue to
-take care of here.)
-
-If A is linked statically into the kernel image, C can be built
-statically or as loadable module(s).  However, if A is built as loadable
-module(s), then C must be restricted to loadable module(s) also.  This
-can be expressed in kconfig language as:
-
-config C
-	depends on A = y || A = B
-
-or for real examples, use this command in a kernel tree:
-
-$ find . -name Kconfig\* | xargs grep -ns "depends on.*=.*||.*=" | grep -v orig
-

Documentation/kernel-parameters.txt

@@ -1094,9 +1094,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	mac5380=	[HW,SCSI] Format:
 			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	mac53c9x=	[HW,SCSI] Format:
-			<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
 	machvec=	[IA64] Force the use of a particular machine-vector
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
@@ -1525,6 +1522,8 @@ and is between 256 and 4096 characters. It is defined in the file
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
 				for broken drivers that don't call it.
+		skip_isa_align	[X86] do not align io start addr, so can
+				handle more pci cards
 		firmware	[ARM] Do not re-enumerate the bus but instead
 				just use the configuration from the
 				bootloader. This is currently used on

Documentation/s390/CommonIO

@@ -8,17 +8,6 @@ Command line parameters
 
   Enable logging of debug information in case of ccw device timeouts.
 
-
-* cio_msg = yes | no
-
-  Determines whether information on found devices and sensed device 
-  characteristics should be shown during startup or when new devices are
-  found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
-  0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
-
-  Default is off.
-
-
 * cio_ignore = {all} |
 	       {<device> | <range of devices>} |
 	       {!<device> | !<range of devices>}

MAINTAINERS

@@ -2112,12 +2112,10 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Jesse Brandeburg
+M:	jesse.brandeburg@intel.com
 P:	Bruce Allan
 M:	bruce.w.allan@intel.com
 P:	John Ronciak

arch/arm/kernel/sys_arm.c

@@ -34,23 +34,6 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
 			       unsigned long new_len, unsigned long flags,
 			       unsigned long new_addr);
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
-	int fd[2];
-	int error;
-
-	error = do_pipe(fd);
-	if (!error) {
-		if (copy_to_user(fildes, fd, 2*sizeof(int)))
-			error = -EFAULT;
-	}
-	return error;
-}
-
 /* common code for old and new mmaps */
 inline long do_mmap2(
 	unsigned long addr, unsigned long len,