backlight: tdo24m: Fix the SPI CS between transfers

Currently the LCD display (TD035S) on the cm-x300 platform is broken and
remains blank.

The TD0245S specification requires that the chipselect is toggled
between commands sent to the panel. This was also the purpose of the
former patch of commit f64dcac ("backlight: tdo24m: ensure chip
select changes between transfers").

Unfortunately, the "cs_change" field of a SPI transfer is
misleading. Its true meaning is that for a SPI message holding multiple
transfers, the chip select is toggled between each transfer, but for the
last transfer it remains asserted.

In this driver, all the SPI messages contain exactly one transfer, which
means that each transfer is the last of its message, and as a
consequence the chip select is never toggled.

Actually, there was a second bug hidding the first one, hence the
problem was not seen until v4.6. This problem was fixed by commit
a52db65 ("spi: pxa2xx: Fix cs_change management") for PXA based
boards.

This fix makes the TD035S work again on a cm-x300 board. The same
applies to other PXA boards, ie. corgi and tosa.

Fixes: a52db65 ("spi: pxa2xx: Fix cs_change management")
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/video/backlight/corgi_lcd.c

@@ -177,7 +177,7 @@ static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
 	struct spi_message msg;
 	struct spi_transfer xfer = {
 		.len		= 1,
-		.cs_change	= 1,
+		.cs_change	= 0,
 		.tx_buf		= lcd->buf,
 	};
 

drivers/video/backlight/tdo24m.c

@@ -369,7 +369,7 @@ static int tdo24m_probe(struct spi_device *spi)
 
 	spi_message_init(m);
 
-	x->cs_change = 1;
+	x->cs_change = 0;
 	x->tx_buf = &lcd->buf[0];
 	spi_message_add_tail(x, m);
 

drivers/video/backlight/tosa_lcd.c

@@ -49,7 +49,7 @@ static int tosa_tg_send(struct spi_device *spi, int adrs, uint8_t data)
 	struct spi_message msg;
 	struct spi_transfer xfer = {
 		.len		= 1,
-		.cs_change	= 1,
+		.cs_change	= 0,
 		.tx_buf		= buf,
 	};