iwlwifi: mvm: add no_basic_ssid option

New FW doesn't use the SSID from scan request template. Adding
a TLV flag to indicate the change, and fixing the flows to send
the first SSID in SSID list if the flag is on.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

drivers/net/wireless/iwlwifi/iwl-fw.h

@@ -80,6 +80,8 @@
  * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
  *	(rather than two) IPv6 addresses
  * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API
+ * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
+ *	from the probe request template.
  * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
  */
 enum iwl_ucode_tlv_flag {
@@ -93,6 +95,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2	= BIT(9),
 	IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS	= BIT(10),
 	IWL_UCODE_TLV_FLAGS_BF_UPDATED		= BIT(11),
+	IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID	= BIT(12),
 	IWL_UCODE_TLV_FLAGS_STA_KEY_CMD		= BIT(19),
 };
 

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -139,6 +139,14 @@ static void iwl_mvm_reset_phy_ctxts(struct iwl_mvm *mvm)
 	}
 }
 
+static int iwl_mvm_max_scan_ie_len(struct iwl_mvm *mvm)
+{
+	/* we create the 802.11 header and SSID element */
+	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID)
+		return mvm->fw->ucode_capa.max_probe_length - 24 - 2;
+	return mvm->fw->ucode_capa.max_probe_length - 24 - 34;
+}
+
 int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 {
 	struct ieee80211_hw *hw = mvm->hw;
@@ -213,9 +221,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 
 	iwl_mvm_reset_phy_ctxts(mvm);
 
-	/* we create the 802.11 header and a max-length SSID element */
-	hw->wiphy->max_scan_ie_len =
-		mvm->fw->ucode_capa.max_probe_length - 24 - 34;
+	hw->wiphy->max_scan_ie_len = iwl_mvm_max_scan_ie_len(mvm);
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 
 	if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)

drivers/net/wireless/iwlwifi/mvm/scan.c

@@ -137,11 +137,12 @@ iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band,
  * request.
  */
 static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd,
-				    struct cfg80211_scan_request *req)
+				    struct cfg80211_scan_request *req,
+				    int first)
 {
 	int fw_idx, req_idx;
 
-	for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0;
+	for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx >= first;
 	     req_idx--, fw_idx++) {
 		cmd->direct_scan[fw_idx].id = WLAN_EID_SSID;
 		cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len;
@@ -157,9 +158,9 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd,
  * just to notify that this scan is active and not passive.
  * In order to notify the FW of the number of SSIDs we wish to scan (including
  * the zero-length one), we need to set the corresponding bits in chan->type,
- * one for each SSID, and set the active bit (first). The first SSID is already
- * included in the probe template, so we need to set only req->n_ssids - 1 bits
- * in addition to the first bit.
+ * one for each SSID, and set the active bit (first). If the first SSID is
+ * already included in the probe template, so we need to set only
+ * req->n_ssids - 1 bits in addition to the first bit.
  */
 static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids)
 {
@@ -174,18 +175,23 @@ static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band)
 }
 
 static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
-				       struct cfg80211_scan_request *req)
+				       struct cfg80211_scan_request *req,
+				       bool basic_ssid)
 {
 	u16 passive_dwell = iwl_mvm_get_passive_dwell(req->channels[0]->band);
 	u16 active_dwell = iwl_mvm_get_active_dwell(req->channels[0]->band,
 						    req->n_ssids);
 	struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
 		(cmd->data + le16_to_cpu(cmd->tx_cmd.len));
 	int i;
+	int type = BIT(req->n_ssids) - 1;
+
+	if (!basic_ssid)
+		type |= BIT(req->n_ssids);
 
 	for (i = 0; i < cmd->channel_count; i++) {
 		chan->channel = cpu_to_le16(req->channels[i]->hw_value);
-		chan->type = cpu_to_le32(BIT(req->n_ssids) - 1);
+		chan->type = cpu_to_le32(type);
 		if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN)
 			chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
 		chan->active_dwell = cpu_to_le16(active_dwell);
@@ -272,6 +278,8 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 	u32 status;
 	int ssid_len = 0;
 	u8 *ssid = NULL;
+	bool basic_ssid = !(mvm->fw->ucode_capa.flags &
+			   IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID);
 
 	lockdep_assert_held(&mvm->mutex);
 	BUG_ON(mvm->scan_cmd == NULL);
@@ -306,14 +314,16 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 	if (req->n_ssids > 0) {
 		cmd->passive2active = cpu_to_le16(1);
 		cmd->scan_flags |= SCAN_FLAGS_PASSIVE2ACTIVE;
-		ssid = req->ssids[0].ssid;
-		ssid_len = req->ssids[0].ssid_len;
+		if (basic_ssid) {
+			ssid = req->ssids[0].ssid;
+			ssid_len = req->ssids[0].ssid_len;
+		}
 	} else {
 		cmd->passive2active = 0;
 		cmd->scan_flags &= ~SCAN_FLAGS_PASSIVE2ACTIVE;
 	}
 
-	iwl_mvm_scan_fill_ssids(cmd, req);
+	iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0);
 
 	cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL);
 	cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
@@ -330,7 +340,7 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm,
 			    req->ie, req->ie_len,
 			    mvm->fw->ucode_capa.max_probe_length));
 
-	iwl_mvm_scan_fill_channels(cmd, req);
+	iwl_mvm_scan_fill_channels(cmd, req, basic_ssid);
 
 	cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) +
 		le16_to_cpu(cmd->tx_cmd.len) +