IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters

Add an InfiniBand driver for Mellanox ConnectX adapters.  Because
these adapters can also be used as ethernet NICs and Fibre Channel 
HBAs, the driver is split into two modules: 
 
  mlx4_core: Handles low-level things like device initialization and 
    processing firmware commands.  Also controls resource allocation 
    so that the InfiniBand, ethernet and FC functions can share a 
    device without stepping on each other. 
 
  mlx4_ib: Handles InfiniBand-specific things; plugs into the 
    InfiniBand midlayer. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/Kconfig

@@ -45,6 +45,8 @@ source "drivers/infiniband/hw/ehca/Kconfig"
 source "drivers/infiniband/hw/amso1100/Kconfig"
 source "drivers/infiniband/hw/cxgb3/Kconfig"
 
+source "drivers/infiniband/hw/mlx4/Kconfig"
+
 source "drivers/infiniband/ulp/ipoib/Kconfig"
 
 source "drivers/infiniband/ulp/srp/Kconfig"

drivers/infiniband/Makefile

@@ -4,6 +4,7 @@ obj-$(CONFIG_INFINIBAND_IPATH)		+= hw/ipath/
 obj-$(CONFIG_INFINIBAND_EHCA)		+= hw/ehca/
 obj-$(CONFIG_INFINIBAND_AMSO1100)	+= hw/amso1100/
 obj-$(CONFIG_INFINIBAND_CXGB3)		+= hw/cxgb3/
+obj-$(CONFIG_MLX4_INFINIBAND)		+= hw/mlx4/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
 obj-$(CONFIG_INFINIBAND_ISER)		+= ulp/iser/

drivers/infiniband/hw/mlx4/Kconfig

@@ -0,0 +1,9 @@
+config MLX4_INFINIBAND
+	tristate "Mellanox ConnectX HCA support"
+	depends on INFINIBAND
+	select MLX4_CORE
+	---help---
+	  This driver provides low-level InfiniBand support for
+	  Mellanox ConnectX PCI Express host channel adapters (HCAs).
+	  This is required to use InfiniBand protocols such as
+	  IP-over-IB or SRP with these devices.

drivers/infiniband/hw/mlx4/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_MLX4_INFINIBAND)	+= mlx4_ib.o
+
+mlx4_ib-y :=	ah.o cq.o doorbell.o mad.o main.o mr.o qp.o srq.o

drivers/infiniband/hw/mlx4/ah.c

@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "mlx4_ib.h"
+
+struct ib_ah *mlx4_ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
+{
+	struct mlx4_dev *dev = to_mdev(pd->device)->dev;
+	struct mlx4_ib_ah *ah;
+
+	ah = kmalloc(sizeof *ah, GFP_ATOMIC);
+	if (!ah)
+		return ERR_PTR(-ENOMEM);
+
+	memset(&ah->av, 0, sizeof ah->av);
+
+	ah->av.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24));
+	ah->av.g_slid  = ah_attr->src_path_bits;
+	ah->av.dlid    = cpu_to_be16(ah_attr->dlid);
+	if (ah_attr->static_rate) {
+		ah->av.stat_rate = ah_attr->static_rate + MLX4_STAT_RATE_OFFSET;
+		while (ah->av.stat_rate > IB_RATE_2_5_GBPS + MLX4_STAT_RATE_OFFSET &&
+		       !(1 << ah->av.stat_rate & dev->caps.stat_rate_support))
+			--ah->av.stat_rate;
+	}
+	ah->av.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28);
+	if (ah_attr->ah_flags & IB_AH_GRH) {
+		ah->av.g_slid   |= 0x80;
+		ah->av.gid_index = ah_attr->grh.sgid_index;
+		ah->av.hop_limit = ah_attr->grh.hop_limit;
+		ah->av.sl_tclass_flowlabel |=
+			cpu_to_be32((ah_attr->grh.traffic_class << 20) |
+				    ah_attr->grh.flow_label);
+		memcpy(ah->av.dgid, ah_attr->grh.dgid.raw, 16);
+	}
+
+	return &ah->ibah;
+}
+
+int mlx4_ib_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr)
+{
+	struct mlx4_ib_ah *ah = to_mah(ibah);
+
+	memset(ah_attr, 0, sizeof *ah_attr);
+	ah_attr->dlid	       = be16_to_cpu(ah->av.dlid);
+	ah_attr->sl	       = be32_to_cpu(ah->av.sl_tclass_flowlabel) >> 28;
+	ah_attr->port_num      = be32_to_cpu(ah->av.port_pd) >> 24;
+	if (ah->av.stat_rate)
+		ah_attr->static_rate = ah->av.stat_rate - MLX4_STAT_RATE_OFFSET;
+	ah_attr->src_path_bits = ah->av.g_slid & 0x7F;
+
+	if (mlx4_ib_ah_grh_present(ah)) {
+		ah_attr->ah_flags = IB_AH_GRH;
+
+		ah_attr->grh.traffic_class =
+			be32_to_cpu(ah->av.sl_tclass_flowlabel) >> 20;
+		ah_attr->grh.flow_label =
+			be32_to_cpu(ah->av.sl_tclass_flowlabel) & 0xfffff;
+		ah_attr->grh.hop_limit  = ah->av.hop_limit;
+		ah_attr->grh.sgid_index = ah->av.gid_index;
+		memcpy(ah_attr->grh.dgid.raw, ah->av.dgid, 16);
+	}
+
+	return 0;
+}
+
+int mlx4_ib_destroy_ah(struct ib_ah *ah)
+{
+	kfree(to_mah(ah));
+	return 0;
+}