TTY: switch tty_buffer_request_room to tty_port

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty pointer in
many call sites. Only tty_port will be needed and hence no more
tty_port_tty_get calls in those paths.

Here we start with tty_buffer_request_room.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/mn10300/kernel/mn10300-serial.c

@@ -524,7 +524,8 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.state->port.tty;
+	struct tty_port *port = &port->uart.state->port;
+	struct tty_struct *tty = port->tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
@@ -534,7 +535,7 @@ static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 	push = 0;
 
 	count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
-	count = tty_buffer_request_room(tty, count);
+	count = tty_buffer_request_room(port, count);
 	if (count == 0) {
 		if (!tty->low_latency)
 			tty_flip_buffer_push(tty);

arch/um/drivers/chan_kern.c

@@ -554,6 +554,7 @@ int parse_chan_pair(char *str, struct line *line, int device,
 
 void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
 {
+	struct tty_port *port = &line->port;
 	struct chan *chan = line->chan_in;
 	int err;
 	char c;
@@ -562,7 +563,7 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
 		goto out;
 
 	do {
-		if (tty && !tty_buffer_request_room(tty, 1)) {
+		if (!tty_buffer_request_room(port, 1)) {
 			schedule_delayed_work(&line->task, 1);
 			goto out;
 		}

drivers/char/pcmcia/synclink_cs.c

@@ -888,6 +888,7 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
 
 static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
 {
+	struct tty_port *port = &info->port;
 	unsigned char data, status, flag;
 	int fifo_count;
 	int work = 0;
@@ -913,7 +914,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
 	} else
 		fifo_count = 32;
 
-	tty_buffer_request_room(tty, fifo_count);
+	tty_buffer_request_room(port, fifo_count);
 	/* Flush received async data to receive data buffer. */
 	while (fifo_count) {
 		data   = read_reg(info, CHA + RXFIFO);

drivers/isdn/i4l/isdn_common.c

@@ -878,6 +878,7 @@ isdn_readbchan(int di, int channel, u_char *buf, u_char *fp, int len, wait_queue
 int
 isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack)
 {
+	struct tty_port *port = tty->port;
 	int count;
 	int count_pull;
 	int count_put;
@@ -891,7 +892,7 @@ isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack)
 	if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
 		return 0;
 
-	len = tty_buffer_request_room(tty, dev->drv[di]->rcvcount[channel]);
+	len = tty_buffer_request_room(port, dev->drv[di]->rcvcount[channel]);
 	if (len == 0)
 		return len;
 

drivers/isdn/i4l/isdn_tty.c

@@ -60,6 +60,7 @@ static int si2bit[8] =
 static int
 isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
 {
+	struct tty_port *port = &info->port;
 	int c;
 	int len;
 	struct tty_struct *tty;
@@ -68,7 +69,7 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
 	if (!info->online)
 		return 0;
 
-	tty = info->port.tty;
+	tty = port->tty;
 	if (!tty)
 		return 0;
 
@@ -81,7 +82,7 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
 #endif
 		;
 
-	c = tty_buffer_request_room(tty, len);
+	c = tty_buffer_request_room(port, len);
 	if (c < len)
 		return 0;
 
@@ -2230,6 +2231,7 @@ void
 isdn_tty_at_cout(char *msg, modem_info *info)
 {
 	struct tty_struct *tty;
+	struct tty_port *port = &info->port;
 	atemu *m = &info->emu;
 	char *p;
 	char c;
@@ -2246,15 +2248,15 @@ isdn_tty_at_cout(char *msg, modem_info *info)
 	l = strlen(msg);
 
 	spin_lock_irqsave(&info->readlock, flags);
-	tty = info->port.tty;
-	if ((info->port.flags & ASYNC_CLOSING) || (!tty)) {
+	tty = port->tty;
+	if ((port->flags & ASYNC_CLOSING) || (!tty)) {
 		spin_unlock_irqrestore(&info->readlock, flags);
 		return;
 	}
 
 	/* use queue instead of direct, if online and */
 	/* data is in queue or buffer is full */
-	if (info->online && ((tty_buffer_request_room(tty, l) < l) ||
+	if (info->online && ((tty_buffer_request_room(port, l) < l) ||
 			     !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
 		skb = alloc_skb(l, GFP_ATOMIC);
 		if (!skb) {

drivers/staging/dgrp/dgrp_net_ops.c

@@ -211,7 +211,7 @@ static void dgrp_input(struct ch_struct *ch)
 	data_len = (ch->ch_rin - ch->ch_rout) & RBUF_MASK;
 
 	/* len is the amount of data we are going to transfer here */
-	len = tty_buffer_request_room(tty, data_len);
+	len = tty_buffer_request_room(&ch->port, data_len);
 
 	/* Check DPA flow control */
 	if ((nd->nd_dpa_debug) &&
@@ -2956,7 +2956,7 @@ static void dgrp_receive(struct nd_struct *nd)
 			    I_BRKINT(ch->ch_tun.un_tty) &&
 			    !(I_IGNBRK(ch->ch_tun.un_tty))) {
 
-				tty_buffer_request_room(ch->ch_tun.un_tty, 1);
+				tty_buffer_request_room(&ch->port, 1);
 				tty_insert_flip_char(ch->ch_tun.un_tty, 0, TTY_BREAK);
 				tty_flip_buffer_push(ch->ch_tun.un_tty);
 

drivers/tty/cyclades.c

@@ -442,6 +442,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 {
 	struct cyclades_port *info;
 	struct tty_struct *tty;
+	struct tty_port *port;
 	int len, index = cinfo->bus_index;
 	u8 ivr, save_xir, channel, save_car, data, char_count;
 
@@ -452,11 +453,12 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	save_xir = readb(base_addr + (CyRIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
+	port = &info->port;
 	save_car = cyy_readb(info, CyCAR);
 	cyy_writeb(info, CyCAR, save_xir);
 	ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
 
-	tty = tty_port_tty_get(&info->port);
+	tty = tty_port_tty_get(port);
 	/* if there is nowhere to put the data, discard it */
 	if (tty == NULL) {
 		if (ivr == CyIVRRxEx) {	/* exception */
@@ -487,14 +489,14 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 			tty_kref_put(tty);
 			return;
 		}
-		if (tty_buffer_request_room(tty, 1)) {
+		if (tty_buffer_request_room(port, 1)) {
 			if (data & info->read_status_mask) {
 				if (data & CyBREAK) {
 					tty_insert_flip_char(tty,
 						cyy_readb(info, CyRDSR),
 						TTY_BREAK);
 					info->icount.rx++;
-					if (info->port.flags & ASYNC_SAK)
+					if (port->flags & ASYNC_SAK)
 						do_SAK(tty);
 				} else if (data & CyFRAME) {
 					tty_insert_flip_char(tty,
@@ -552,7 +554,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 			info->mon.char_max = char_count;
 		info->mon.char_last = char_count;
 #endif
-		len = tty_buffer_request_room(tty, char_count);
+		len = tty_buffer_request_room(port, char_count);
 		while (len--) {
 			data = cyy_readb(info, CyRDSR);
 			tty_insert_flip_char(tty, data, TTY_NORMAL);
@@ -928,6 +930,7 @@ static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
+	struct tty_port *port = &info->port;
 	unsigned int char_count;
 	int len;
 #ifdef BLOCKMOVE
@@ -983,7 +986,7 @@ static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
 				info->idle_stats.recv_bytes += len;
 			}
 #else
-			len = tty_buffer_request_room(tty, char_count);
+			len = tty_buffer_request_room(port, char_count);
 			while (len--) {
 				data = readb(cinfo->base_addr + rx_bufaddr +
 						new_rx_get);

drivers/tty/ehv_bytechan.c

@@ -386,7 +386,7 @@ static irqreturn_t ehv_bc_tty_rx_isr(int irq, void *data)
 	 * read from the byte channel will be accepted by the TTY layer.
 	 */
 	ev_byte_channel_poll(bc->handle, &rx_count, &tx_count);
-	count = tty_buffer_request_room(ttys, rx_count);
+	count = tty_buffer_request_room(&bc->port, rx_count);
 
 	/* 'count' is the maximum amount of data the TTY layer can accept at
 	 * this time.  However, during testing, I was never able to get 'count'

drivers/tty/hvc/hvc_console.c

@@ -629,7 +629,7 @@ int hvc_poll(struct hvc_struct *hp)
 
 	/* Read data if any */
 	for (;;) {
-		int count = tty_buffer_request_room(tty, N_INBUF);
+		int count = tty_buffer_request_room(&hp->port, N_INBUF);
 
 		/* If flip is full, just reschedule a later read */
 		if (count == 0) {

drivers/tty/hvc/hvcs.c

@@ -609,7 +609,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd)
 	/* remove the read masks */
 	hvcsd->todo_mask &= ~(HVCS_READ_MASK);
 
-	if (tty_buffer_request_room(tty, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) {
+	if (tty_buffer_request_room(&hvcsd->port, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) {
 		got = hvc_get_chars(unit_address,
 				&buf[0],
 				HVCS_BUFF_LEN);

drivers/tty/serial/cpm_uart/cpm_uart_core.c

@@ -245,7 +245,8 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	int i;
 	unsigned char ch;
 	u8 *cp;
-	struct tty_struct *tty = port->state->port.tty;
+	struct tty_port *tport = &port->state->port;
+	struct tty_struct *tty = tport->tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	cbd_t __iomem *bdp;
 	u16 status;
@@ -276,7 +277,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 		/* If we have not enough room in tty flip buffer, then we try
 		 * later, which will be the next rx-interrupt or a timeout
 		 */
-		if(tty_buffer_request_room(tty, i) < i) {
+		if (tty_buffer_request_room(tport, i) < i) {
 			printk(KERN_WARNING "No room in flip buffer\n");
 			return;
 		}

drivers/tty/serial/ioc4_serial.c

@@ -2356,7 +2356,7 @@ static void receive_chars(struct uart_port *the_port)
 	spin_lock_irqsave(&the_port->lock, pflags);
 	tty = state->port.tty;
 
-	request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
+	request_count = tty_buffer_request_room(&state->port, IOC4_MAX_CHARS);
 
 	if (request_count > 0) {
 		icount = &the_port->icount;

drivers/tty/serial/jsm/jsm_tty.c

@@ -521,6 +521,7 @@ void jsm_input(struct jsm_channel *ch)
 {
 	struct jsm_board *bd;
 	struct tty_struct *tp;
+	struct tty_port *port;
 	u32 rmask;
 	u16 head;
 	u16 tail;
@@ -536,7 +537,8 @@ void jsm_input(struct jsm_channel *ch)
 	if (!ch)
 		return;
 
-	tp = ch->uart_port.state->port.tty;
+	port = &ch->uart_port.state->port;
+	tp = port->tty;
 
 	bd = ch->ch_bd;
 	if(!bd)
@@ -600,7 +602,7 @@ void jsm_input(struct jsm_channel *ch)
 		return;
 	}
 
-	len = tty_buffer_request_room(tp, data_len);
+	len = tty_buffer_request_room(port, data_len);
 	n = len;
 
 	/*

drivers/tty/serial/mpsc.c

@@ -937,7 +937,8 @@ static int serial_polled;
 static int mpsc_rx_intr(struct mpsc_port_info *pi)
 {
 	struct mpsc_rx_desc *rxre;
-	struct tty_struct *tty = pi->port.state->port.tty;
+	struct tty_port *port = &pi->port.state->port;
+	struct tty_struct *tty = port->tty;
 	u32	cmdstat, bytes_in, i;
 	int	rc = 0;
 	u8	*bp;
@@ -968,8 +969,7 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
 		}
 #endif
 		/* Following use of tty struct directly is deprecated */
-		if (unlikely(tty_buffer_request_room(tty, bytes_in)
-					< bytes_in)) {
+		if (tty_buffer_request_room(port, bytes_in) < bytes_in) {
 			if (tty->low_latency)
 				tty_flip_buffer_push(tty);
 			/*

drivers/tty/serial/mrst_max3110.c

@@ -339,6 +339,7 @@ static int
 receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
 {
 	struct uart_port *port = &max->port;
+	struct tty_port *tport;
 	struct tty_struct *tty;
 	char buf[M3110_RX_FIFO_DEPTH];
 	int r, w, usable;
@@ -347,7 +348,8 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
 	if (!port->state)
 		return 0;
 
-	tty = tty_port_tty_get(&port->state->port);
+	tport = &port->state->port;
+	tty = tty_port_tty_get(tport);
 	if (!tty)
 		return 0;
 
@@ -370,7 +372,7 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
 	}
 
 	for (r = 0; w; r += usable, w -= usable) {
-		usable = tty_buffer_request_room(tty, w);
+		usable = tty_buffer_request_room(tport, w);
 		if (usable) {
 			tty_insert_flip_string(tty, buf + r, usable);
 			port->icount.rx += usable;

drivers/tty/serial/pch_uart.c

@@ -629,15 +629,16 @@ static int dma_push_rx(struct eg20t_port *priv, int size)
 	struct tty_struct *tty;
 	int room;
 	struct uart_port *port = &priv->port;
+	struct tty_port *tport = &port->state->port;
 
 	port = &priv->port;
-	tty = tty_port_tty_get(&port->state->port);
+	tty = tty_port_tty_get(tport);
 	if (!tty) {
 		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return 0;
 	}
 
-	room = tty_buffer_request_room(tty, size);
+	room = tty_buffer_request_room(tport, size);
 
 	if (room < size)
 		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",

drivers/tty/serial/sh-sci.c

@@ -596,7 +596,8 @@ static void sci_transmit_chars(struct uart_port *port)
 static void sci_receive_chars(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
-	struct tty_struct *tty = port->state->port.tty;
+	struct tty_port *tport = &port->state->port;
+	struct tty_struct *tty = tport->tty;
 	int i, count, copied = 0;
 	unsigned short status;
 	unsigned char flag;
@@ -607,7 +608,7 @@ static void sci_receive_chars(struct uart_port *port)
 
 	while (1) {
 		/* Don't copy more bytes than there is room for in the buffer */
-		count = tty_buffer_request_room(tty, sci_rxfill(port));
+		count = tty_buffer_request_room(tport, sci_rxfill(port));
 
 		/* If for any reason we can't copy more data, we're done! */
 		if (count == 0)
@@ -1263,9 +1264,10 @@ static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
 			   size_t count)
 {
 	struct uart_port *port = &s->port;
+	struct tty_port *tport = &port->state->port;
 	int i, active, room;
 
-	room = tty_buffer_request_room(tty, count);
+	room = tty_buffer_request_room(tport, count);
 
 	if (s->active_rx == s->cookie_rx[0]) {
 		active = 0;