Skip to content

Commit

Permalink
powerpc/64s/exception: Only test KVM in SRR interrupts when PR KVM is…
Browse files Browse the repository at this point in the history
… supported

Apart from SRESET, MCE, and syscall (hcall variant), the SRR type
interrupts are not escalated to hypervisor mode, so are delivered to
the OS.

When running PR KVM, the OS is the hypervisor, and the guest runs with
MSR[PR]=1 (ie. usermode), so these interrupts must test if a guest was
running when interrupted. These tests are required at the real-mode
entry points because the PR KVM host runs with LPCR[AIL]=0.

In HV KVM and nested HV KVM, the guest always receives these
interrupts, so there is no need for the host to make this test. So
remove the tests if PR KVM is not configured.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-21-npiggin@gmail.com
  • Loading branch information
Nicholas Piggin authored and Michael Ellerman committed Apr 1, 2020
1 parent 9432535 commit 2284ffe
Showing 1 changed file with 62 additions and 3 deletions.
65 changes: 62 additions & 3 deletions arch/powerpc/kernel/exceptions-64s.S
Original file line number Diff line number Diff line change
Expand Up @@ -214,9 +214,36 @@ do_define_int n
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
* If hv is possible, interrupts come into to the hv version
* of the kvmppc_interrupt code, which then jumps to the PR handler,
* kvmppc_interrupt_pr, if the guest is a PR guest.
* All interrupts which set HSRR registers, as well as SRESET and MCE and
* syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken,
* so they all generally need to test whether they were taken in guest context.
*
* Note: SRESET and MCE may also be sent to the guest by the hypervisor, and be
* taken with MSR[HV]=0.
*
* Interrupts which set SRR registers (with the above exceptions) do not
* elevate to MSR[HV]=1 mode, though most can be taken when running with
* MSR[HV]=1 (e.g., bare metal kernel and userspace). So these interrupts do
* not need to test whether a guest is running because they get delivered to
* the guest directly, including nested HV KVM guests.
*
* The exception is PR KVM, where the guest runs with MSR[PR]=1 and the host
* runs with MSR[HV]=0, so the host takes all interrupts on behalf of the
* guest. PR KVM runs with LPCR[AIL]=0 which causes interrupts to always be
* delivered to the real-mode entry point, therefore such interrupts only test
* KVM in their real mode handlers, and only when PR KVM is possible.
*
* Interrupts that are taken in MSR[HV]=0 and escalate to MSR[HV]=1 are always
* delivered in real-mode when the MMU is in hash mode because the MMU
* registers are not set appropriately to translate host addresses. In nested
* radix mode these can be delivered in virt-mode as the host translations are
* used implicitly (see: effective LPID, effective PID).
*/

/*
* If an interrupt is taken while a guest is running, it is immediately routed
* to KVM to handle. If both HV and PR KVM arepossible, KVM interrupts go first
* to kvmppc_interrupt_hv, which handles the PR guest case.
*/
#define kvmppc_interrupt kvmppc_interrupt_hv
#else
Expand Down Expand Up @@ -1274,8 +1301,10 @@ INT_DEFINE_BEGIN(data_access)
IVEC=0x300
IDAR=1
IDSISR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
#endif
INT_DEFINE_END(data_access)

EXC_REAL_BEGIN(data_access, 0x300, 0x80)
Expand Down Expand Up @@ -1322,8 +1351,10 @@ INT_DEFINE_BEGIN(data_access_slb)
IAREA=PACA_EXSLB
IRECONCILE=0
IDAR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
#endif
INT_DEFINE_END(data_access_slb)

EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
Expand Down Expand Up @@ -1373,7 +1404,9 @@ INT_DEFINE_BEGIN(instruction_access)
IISIDE=1
IDAR=1
IDSISR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(instruction_access)

EXC_REAL_BEGIN(instruction_access, 0x400, 0x80)
Expand Down Expand Up @@ -1412,7 +1445,9 @@ INT_DEFINE_BEGIN(instruction_access_slb)
IRECONCILE=0
IISIDE=1
IDAR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(instruction_access_slb)

EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
Expand Down Expand Up @@ -1504,7 +1539,9 @@ INT_DEFINE_BEGIN(alignment)
IVEC=0x600
IDAR=1
IDSISR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(alignment)

EXC_REAL_BEGIN(alignment, 0x600, 0x100)
Expand Down Expand Up @@ -1534,7 +1571,9 @@ EXC_COMMON_BEGIN(alignment_common)
*/
INT_DEFINE_BEGIN(program_check)
IVEC=0x700
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(program_check)

EXC_REAL_BEGIN(program_check, 0x700, 0x100)
Expand Down Expand Up @@ -1597,7 +1636,9 @@ EXC_COMMON_BEGIN(program_check_common)
INT_DEFINE_BEGIN(fp_unavailable)
IVEC=0x800
IRECONCILE=0
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(fp_unavailable)

EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100)
Expand Down Expand Up @@ -1659,7 +1700,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
INT_DEFINE_BEGIN(decrementer)
IVEC=0x900
IMASK=IRQS_DISABLED
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(decrementer)

EXC_REAL_BEGIN(decrementer, 0x900, 0x80)
Expand Down Expand Up @@ -1744,7 +1787,9 @@ EXC_COMMON_BEGIN(hdecrementer_common)
INT_DEFINE_BEGIN(doorbell_super)
IVEC=0xa00
IMASK=IRQS_DISABLED
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(doorbell_super)

EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
Expand Down Expand Up @@ -1922,7 +1967,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
*/
INT_DEFINE_BEGIN(single_step)
IVEC=0xd00
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(single_step)

EXC_REAL_BEGIN(single_step, 0xd00, 0x100)
Expand Down Expand Up @@ -2213,7 +2260,9 @@ EXC_VIRT_NONE(0x4ee0, 0x20)
INT_DEFINE_BEGIN(performance_monitor)
IVEC=0xf00
IMASK=IRQS_PMI_DISABLED
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(performance_monitor)

EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20)
Expand Down Expand Up @@ -2242,7 +2291,9 @@ EXC_COMMON_BEGIN(performance_monitor_common)
INT_DEFINE_BEGIN(altivec_unavailable)
IVEC=0xf20
IRECONCILE=0
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(altivec_unavailable)

EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
Expand Down Expand Up @@ -2296,7 +2347,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
INT_DEFINE_BEGIN(vsx_unavailable)
IVEC=0xf40
IRECONCILE=0
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(vsx_unavailable)

EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20)
Expand Down Expand Up @@ -2349,7 +2402,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
*/
INT_DEFINE_BEGIN(facility_unavailable)
IVEC=0xf60
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(facility_unavailable)

EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20)
Expand Down Expand Up @@ -2439,8 +2494,10 @@ EXC_VIRT_NONE(0x5200, 0x100)

INT_DEFINE_BEGIN(instruction_breakpoint)
IVEC=0x1300
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
#endif
INT_DEFINE_END(instruction_breakpoint)

EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100)
Expand Down Expand Up @@ -2611,7 +2668,9 @@ EXC_VIRT_NONE(0x5600, 0x100)

INT_DEFINE_BEGIN(altivec_assist)
IVEC=0x1700
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_REAL=1
#endif
INT_DEFINE_END(altivec_assist)

EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100)
Expand Down

0 comments on commit 2284ffe

Please sign in to comment.