usb: OHCI/EHCI support for Netlogic XLS processor.

Add supprt for on-chip USB controller for Netlogic XLS MIPS64
SoC processor family.
Changes are:
 - update ehci-hcd.c and ohci-hcd.c to add XLS hcds
 - add ehci-xls.c: EHCI support for Netlogic XLS.
 - add ohci-xls.c: OHCI support for Netlogic XLS.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ehci-hcd.c

@@ -1296,6 +1296,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_pxa168_driver
 #endif
 
+#ifdef CONFIG_NLM_XLR
+#include "ehci-xls.c"
+#define PLATFORM_DRIVER		ehci_xls_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)

drivers/usb/host/ehci-xls.c

@@ -0,0 +1,161 @@
+/*
+ * EHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_xls_setup(struct usb_hcd *hcd)
+{
+	int	retval;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return retval;
+}
+
+int ehci_xls_probe_internal(const struct hc_driver *driver,
+	struct platform_device *pdev)
+{
+	struct usb_hcd  *hcd;
+	struct resource *res;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
+			retval);
+	return retval;
+}
+
+static struct hc_driver ehci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS EHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ehci_hcd),
+	.irq		= ehci_irq,
+	.flags		= HCD_USB2 | HCD_MEMORY,
+	.reset		= ehci_xls_setup,
+	.start		= ehci_run,
+	.stop		= ehci_stop,
+	.shutdown	= ehci_shutdown,
+
+	.urb_enqueue	= ehci_urb_enqueue,
+	.urb_dequeue	= ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset	= ehci_endpoint_reset,
+
+	.get_frame_number = ehci_get_frame,
+
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control	= ehci_hub_control,
+	.bus_suspend	= ehci_bus_suspend,
+	.bus_resume	= ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_xls_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
+}
+
+static int ehci_xls_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+MODULE_ALIAS("ehci-xls");
+
+static struct platform_driver ehci_xls_driver = {
+	.probe		= ehci_xls_probe,
+	.remove		= ehci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "ehci-xls",
+	},
+};

drivers/usb/host/ohci-hcd.c

@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
 #endif
 
+#ifdef CONFIG_NLM_XLR
+#include "ohci-xls.c"
+#define PLATFORM_DRIVER		ohci_xls_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\

drivers/usb/host/ohci-xls.c

@@ -0,0 +1,151 @@
+/*
+ * OHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on ohci-au1xxx.c, and other Linux OHCI drivers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+static int ohci_xls_probe_internal(const struct hc_driver *driver,
+			struct platform_device *dev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "Found HC with no IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&dev->dev, "MMIO Handle incorrect!\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, "XLS");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(&dev->dev, "Controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&dev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&dev->dev, "init fail, %d\n", retval);
+	return retval;
+}
+
+static int ohci_xls_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int __devinit ohci_xls_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+	int ret;
+
+	ohci = hcd_to_ohci(hcd);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static struct hc_driver ohci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS OHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ohci_hcd),
+	.irq		= ohci_irq,
+	.flags		= HCD_MEMORY | HCD_USB11,
+	.reset		= ohci_xls_reset,
+	.start		= ohci_xls_start,
+	.stop		= ohci_stop,
+	.shutdown	= ohci_shutdown,
+	.urb_enqueue	= ohci_urb_enqueue,
+	.urb_dequeue	= ohci_urb_dequeue,
+	.endpoint_disable = ohci_endpoint_disable,
+	.get_frame_number = ohci_get_frame,
+	.hub_status_data = ohci_hub_status_data,
+	.hub_control	= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend	= ohci_bus_suspend,
+	.bus_resume	= ohci_bus_resume,
+#endif
+	.start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_xls_probe(struct platform_device *dev)
+{
+	int ret;
+
+	pr_debug("In ohci_xls_probe");
+	if (usb_disabled())
+		return -ENODEV;
+	ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
+	return ret;
+}
+
+static int ohci_xls_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static struct platform_driver ohci_xls_driver = {
+	.probe		= ohci_xls_probe,
+	.remove		= ohci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ohci-xls-0",
+		.owner	= THIS_MODULE,
+	},
+};