ARM: dts: am43xx: convert to use new clkctrl layout

Convert AM43xx to use the new clockdomain based layout. Previously the
clkctrl split was based on CM isntance boundaries. The new layout
helps with introducing the interconnect driver instances.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am4372.dtsi

@@ -1017,7 +1017,7 @@
 				reg = <0x483a8000 0x8000>;
 				syscon-phy-power = <&scm_conf 0x620>;
 				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&l4_per_clkctrl AM4_USB_OTG_SS0_CLKCTRL 8>;
+					 <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>;
 				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
 				status = "disabled";
@@ -1036,7 +1036,7 @@
 				reg = <0x483e8000 0x8000>;
 				syscon-phy-power = <&scm_conf 0x628>;
 				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&l4_per_clkctrl AM4_USB_OTG_SS1_CLKCTRL 8>;
+					 <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>;
 				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -710,73 +710,123 @@
 };
 
 &prcm {
-	l4_wkup_cm: l4_wkup_cm@2800 {
+	wkup_cm: wkup-cm@2800 {
 		compatible = "ti,omap4-cm";
 		reg = <0x2800 0x400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x2800 0x400>;
 
-		l4_wkup_clkctrl: clk@20 {
+		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
 			compatible = "ti,clkctrl";
-			reg = <0x20 0x34c>;
+			reg = <0x120 0x4>;
 			#clock-cells = <2>;
 		};
+
+		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
+			compatible = "ti,clkctrl";
+			reg = <0x228 0xc>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
+			compatible = "ti,clkctrl";
+			reg = <0x220 0x4>, <0x328 0x44>;
+			#clock-cells = <2>;
+		};
+
 	};
 
-	mpu_cm: mpu_cm@8300 {
+	mpu_cm: mpu-cm@8300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x8300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8300 0x100>;
 
-		mpu_clkctrl: clk@20 {
+		mpu_clkctrl: mpu-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gfx_l3_cm: gfx_l3_cm@8400 {
+	gfx_l3_cm: gfx-l3-cm@8400 {
 		compatible = "ti,omap4-cm";
 		reg = <0x8400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8400 0x100>;
 
-		gfx_l3_clkctrl: clk@20 {
+		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_rtc_cm: l4_rtc_cm@8500 {
+	l4_rtc_cm: l4-rtc-cm@8500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x8500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8500 0x100>;
 
-		l4_rtc_clkctrl: clk@20 {
+		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_per_cm: l4_per_cm@8800 {
+	per_cm: per-cm@8800 {
 		compatible = "ti,omap4-cm";
 		reg = <0x8800 0xc00>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8800 0xc00>;
 
-		l4_per_clkctrl: clk@20 {
+		l3_clkctrl: l3-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x3c>, <0x78 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: l3s-clkctrl@68 {
+			compatible = "ti,clkctrl";
+			reg = <0x68 0xc>, <0x220 0x4c>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
 			compatible = "ti,clkctrl";
-			reg = <0x20 0xb04>;
+			reg = <0x320 0x4>;
 			#clock-cells = <2>;
 		};
+
+		l4ls_clkctrl: l4ls-clkctrl@420 {
+			compatible = "ti,clkctrl";
+			reg = <0x420 0x1a4>;
+			#clock-cells = <2>;
+		};
+
+		emif_clkctrl: emif-clkctrl@720 {
+			compatible = "ti,clkctrl";
+			reg = <0x720 0x4>;
+			#clock-cells = <2>;
+		};
+
+		dss_clkctrl: dss-clkctrl@a20 {
+			compatible = "ti,clkctrl";
+			reg = <0xa20 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
+			compatible = "ti,clkctrl";
+			reg = <0xb20 0x4>;
+			#clock-cells = <2>;
+		};
+
 	};
 };